HarmanKardon-HS100-hcs-sm维修电路原理图.pdf

《HarmanKardon-HS100-hcs-sm维修电路原理图.pdf》由会员分享，可在线阅读，更多相关《HarmanKardon-HS100-hcs-sm维修电路原理图.pdf（77页珍藏版）》请在收音机爱好者资料库上搜索。

1、ENGLISHHS 200 Home Cinema SystemSERVICE MANUALRadioFans.CN 收音机爱 好者资料库FRONT PANEL CONTROLS 7ENGLISHFront Panel Controls?Main Information Display1Power On/Off (Standby)2Eject3USB On-The-Go Input4Headphone Jack5Volume Control6Slot Loader?Main Information Display:This displaydelivers messages and status

2、 indications to helpyou operate the HS 200 Controller.1Power On/Off (Standby): Press the buttononce to turn the HS 200 Controller on, press itagain to put the unit in the Standby mode.Note that when the HS 200 Controller isswitched on, the Power Indicator around thebutton turns blue.2Eject: Press th

3、is button to release a discfrom the loader.3USB On-The-Go Input:This input may beused to temporarily connect a USB thumb deviceor portable hard disk for direct playback ofaudio, image of video files or a USB hub.TheUSB inputs are designed to power a single USBdevice at a time. If additional hard dis

4、ks areconnected through a hub it is necessary thatadditional external power supplies are used topower the hub and hard disks.4Headphone Jack:This jack may be used tolisten to the systems output through a pair ofheadphones. Be certain that the headphoneshave a standard 3.5 mm stereo phone plug.Note t

5、hat the main room speakers willautomatically be turned off when theheadphone jack is in use.5Volume Control:Turn this knob clockwiseto increase the volume, counterclockwise todecrease the volume. If the system is muted,adjusting volume control will automaticallyrelease the unit from the silenced con

6、dition.6Slot loader: Gently insert a CD or DVD intothis slot, with the printed side of the disc facingup. Note there is no drawer. Press the EjectButton2to release the disc.RadioFans.CN 收音机爱 好者资料库8 FRONT PANEL DISPLAYFront Panel DisplayA Disc Type IndicatorsB Playback-Mode IndicatorsC Progressive Sc

7、an IndicatorD Parental Lock IndicatorETime IndicatorsFVideo Format IndicatorsG Source IndicatorsH Repeat IndicatorsIVCD Playback Control IndicatorJ Random IndicatorKA-B Repeat IndicatorL Program IndicatorMAngle IndicatorNTitle IndicatorsO Chapter/Track Number IndicatorsPVideo Output IndicatorsA Disc

8、 Type Indicators: The CD or DVDindicator will illuminate to show the type of disccurrently being played.B Playback-Mode Indicators:Theseindicators light to show the current playbackmode:NLights when a disc is playing in the normalmodeHLights when the disc is in the Fast SearchForward mode.The on-scr

9、een banner displayindicates the selected speed (2x, 8x, 16x, 100 x).1Lights when the disc is paused.GLights when the disc is in the Fast SearchReverse mode.The on-screen banner displayindicates the selected speed (2x, 8x, 16x, 100 x).C Progressive Scan Indicator: This indicatorlights when the unit s

10、ends out a progressivescan signal.D Parental Lock Indicator:This indicatorlights when the parental-lock system is engagedin order to prevent anyone from changing therating level without a code.E Time Indicators:These positions in theindicator will show the running time of a DVD inplay.When a CD is p

11、laying, these indicators willshow the current track time, time remaining inthe current track, or the total remaining time onthe disc.NOTE: The Indicators NOE will also displaytext messages about the DVDs status, includingReadingwhen a disc is loading,STANDBYwhen the unit is turned off, andDisc Error

12、when a disc not compatiblewith the DVD is put into the play position.F Video Format Indicators:These indicatorswill represent the video format currently playing.G Source Indicators:These indicators willlight to show which source is currently selected.H Repeat Indicators:These indicators lightwhen an

13、y of the Repeat functions are in use.I VCD Playback Control Indicator:Thisindicator lights when the playback controlfunction is turned on with VCDs.J Random Indicator: This indicator lightswhen the unit is in the Random Play mode.K A-B Repeat Indicator:This indicator lightswhen a specific passage fo

14、r repeat playback hasbeen selected.L Program Indicator:This indicator lightswhen the programming functions are in use.M Angle Indicator: This indicator blinks whenalternative viewing angles are available on theDVD currently playing.N Title Indicators: These two positions in thedisplay will show the

15、current title number whena DVD disc is playing.O Chapter/Track Number Indicators:Whena DVD disc is playing, these two positions in thedisplay will show the current chapter.When aCD disc is playing they will show the currenttrack number.P Video Output Indicators:These indicatorswill represent the act

16、ive video output.REAR PANEL CONNECTIONS9ENGLISHRear Panel Connections?Composite Video Output?S-Video Output?Component Video Outputs?Scart TV Output?AC Power Cord?FM Antenna?Audio In?Subwoofer Output?Coaxial Digital Input?Optical Digital Input?Analog Audio Outputs?Front Speaker Outputs?Remote IR Inpu

17、t?TV Audio In?Coaxial Digital Output?Subwoofer Trigger Output?USB On-The-Go Input?HDMI Output?Remote IR Output?Composite Video Output: Connect thisjack to the video input on a television or videoprojector.?S-Video Output: Connect this jack to the S-Video input on a television or video projector.?Com

18、ponent Video Outputs:These outputscarry the component video signals for connectionto display monitors with component video inputs.For standard analog TVs or projectors withinputs marked Y/Pr/Pb or Y/Cr/Cb, connect theseoutputs to the corresponding inputs. If you havea high-definition television or p

19、rojector that iscompatible with high scan rate progressive video,connect these jacks to the “HD Component”inputs. Note that if you are using a progressivescan display device, then ”Progressive” must beselected in the Video Set-up Menu in order totake advantage of the progressive scan circuitry.See p

20、age 20 for more information on progressivescan video.IMPORTANT:These jacks should NOT be con-nected to standard composite video inputs.?SCART OUT (TV): If your TV has a SCARTsocket, you can connect a SCART cable to yourTV and to your DVD Player for improved videoquality.The SCART cable carries both

21、audio andvideo.You can select Composite Video or RGBvideo for that SCART connectors video outputsignal.?AC Power Cord: Connect this plug to an ACoutlet. If the outlet is controlled by a switch,make certain that it is in the ON position.?FM Antenna: Connect to the supplied FMantenna.?Audio In: Connec

22、t to a line-level analogaudio source:TV, tape player, Minidisc, PC, etc.?Subwoofer Output: Connect to theSUB/LFE input on the subwoofer.?Coaxial Digital Input: Connect the coaxdigital output from a DVD player, HDTV receiver,LD player, MD player, satellite receiver or CDplayer to this jack.The signal

23、 may be either aDolby Digital signal, DTS signal or a standardPCM digital source. Do not connect the RF digitaloutput of an LD player to these jacks.?Optical Digital Input: Connect the opticaldigital output from a DVD player, HDTV receiver,LD player, MD player, satellite receiver or CDplayer to this

24、 jack.The signal may be either aDolby Digital signal, DTS signal or a standardPCM digital source.?Analog Audio Outputs: Connect thesejacks to the analog audio input on a TV set orexternal audio system for analog audio playbackor to the RECORD/INPUT jacks of an audiorecorder for recording.?Front Spea

25、ker Outputs: Connect theseoutputs to the matching + or terminals on yourleft and right speakers. In conformance with thenew CEA color code specification, the White ter-minal is the positive, or + terminal that shouldbe connected to the red (+) terminal on FrontLeft speaker with the older color codin

26、g, whilethe Red terminal is the positive, or + terminalthat should be connected to the red (+) terminalon Front Right speaker. Connect the black ()terminals on the HS to the black () terminals onthe speakers. See page 14 for more informationon speaker polarity.?Remote IR Input: If the HS 200s front-

27、panel IR sensor is blocked due to cabinet doorsor other obstructions, an external IR sensor maybe used. Connect the output of the sensor tothis jack.10REAR PANEL CONNECTIONSRear Panel Connections?TV Audio Input: If your screen isconnected to the HS by an HDMI, Component,S-Video or Composite cable, c

28、onnect theanalog output of your TV to this input. If youhave your TV connected to the HS with a Scartcable, an audio connection to the TV Input isnot necessary.Note:Youll find more details about allAudio/Video connections under Setup andConnections on the following pages.?Coaxial Digital Output: Con

29、nect this jackto the matching digital input connector on adigital recorder such as a CD-R or MiniDiscrecorder.?Subwoofer Trigger Output: Connect thistrigger output to the trigger input of the Harman Kardon subwoofer, so that thesubwoofer will switch on and off at the sametime as the rest of the syst

30、em.?USB On-The-Go Input:This input may beused to temporarily connect a USB thumb deviceor portable hard disk for direct playback ofaudio, image of video files, a digital photocamera or a USB hub.?HDMI Output: Connect this output to theHDMI input of high-definition LCD, Plasma orvideo projector for t

31、he best possible picturequality.?Remote IR Output:This connectionpermits the IR sensor in the receiver to serveother remote controlled devices. Connect thisjack to the “IR IN” jack on Harman Kardon orother compatible equipment.REMOTE CONTROL11ENGLISH0123456789ABCDEFGHIJKLMNOPQ?Remote ControlPower On

32、/Source Selection ButtonPower Off ButtonSubtitle ButtonTitle ButtonAngle ButtonAudio ButtonEnter ButtonEject ButtonSet-Up/OSD ButtonArrows ButtonMute ButtonMenu ButtonPause ButtonStatus ButtonSkip/Step (Previous) ButtonSkip/Step (Next) ButtonPlay ButtonSearch/Slow Reverse ButtonSTOP ButtonSearch/Slo

33、w Forward ButtonMacro ButtonsPic +/Pic - ButtonZoom ButtonPlaylist ButtonRandom ButtonA-B Repeat ButtonVolume up/down ButtonLight ButtonNumeric Keys ButtonRepeat ButtonClear ButtonVideo output ButtonVideo format ButtonLearn ButtonScreen Power ButtonsInfo ButtonTeletext ButtonsPicture in Picture Butt

34、onScreen Format ButtonIR Transmitter WindowProgram Indicator?CJGF?P?4M?86B5QA?10?L289DONK?7EH3I?12REMOTE CONTROLRemote Control0Power On/Source Selector Buttons:Pressing one of these buttons will perform threeactions at the same time. First, if the HS Systemis not turned on, this will power up the un

35、it.Next, it will select the source shown on the but-ton as the input to the HS System. Finally, it willchange the remote control so that it controls thedevice selected.1Power Off Button:Turns off the HS system to standby mode.2Subtitle Button:When a DVD is playing,press to select a subtitle language

36、 or to turnsubtitles off.3Title Button:When a disc is playing, pressto make the player go back to the first section ofthe disc.4Angle Button: Press to access variouscamera angles on a DVD (If the DVD containsmultiple camera angles) or to rotate JPEGimages.5Audio Button: Press to access variousaudio

37、languages on a DVD (If the DVD contains multiple audio streams).6Enter Button: Press this button to activatea setting or option.7Eject Button: Press to release the discfrom the loader.8Set-up/OSD: Press to access the On ScreenDisplay Menu.9Arrow buttons (M/N/K/L) Buttons:Use to move the cursor in th

38、e OSD.AMute Button: Mutes the sound.BMenu Button: Displays the actual DVDDisc Menu on the TV screen in play mode.When playing discs with JPEG images, pressingthis button will access the thumbnails.CPause Button: Freezes a picture (withDVD/VCD) and pauses the playback signal (CD)when a disc is playin

39、g. Press again for normalplayback.DStatus Button: Press while a disc is play-ing to view banner display. Use the ARROW but-tons to move through the different features inthe Banner Display.When a symbol is highlight-ed, press ENTER on the remote to select it.ESkip/Step (Previous) Button: Press to got

40、o beginning of current track. Press again quicklyto go to beginning of previous track.After press-ing the PAUSE button, each press of this buttonwill move the image in reverse frame by frame.FSkip/Step (Next) Button: Press to go tobeginning of next track.After pressing the PAUSEbutton, each press of

41、 this button will move theimage forwards frame by frame.GPlay Button: Begins to play disc (closesdisc tray first, if it is open).HSearch/Slow (Rev.) Button:Allows youto search in reverse through a disc while it is inplay mode. Each time you press this button, thesearch speed changes as indicated by

42、a numberof arrows on the right top of your screen.After pressing the PAUSE button, each press ofthis button will change the slow down speedindicated by a number of arrows in the right topof the screen.IStop Button: Stops playing a disc.When adisc is playing, if you press STOP and PLAY, thedisc will

43、resume play, i.e. it will start from thesame point on the disc where the unit wasstopped. If you press STOP twice and the PLAYbutton, the disc will start play from the begin-ning.JSearch/Slow (Fwd.) Button:Allows youto search forward through a disc while it is inplay mode. Each time you press this b

44、utton, thesearch speed changes as indicated by a numberof arrows on the right top of your screen.After pressing the PAUSE button, each press ofthis button will change the slow down speed asindicated by a number of arrows in the right topof the screen.KMacro Buttons: Press these buttons tostore or re

45、call a “Macro”,which is a pre-pro-grammed sequence of commands stored in theremote.(See page 26 for more information onstoring and recalling macros.).LPic +/Pic - Button: Pressing these buttonsin JPEG mode will move to the previous or nextimage.MZoom Button:When a DVD or VCD isplaying, press this bu

46、tton to zoom the picture sothat it is enlarged.There are 4 steps to the zoomfunction, each progressively larger. Press througheach of the zoom stages to return to a normalpicture.The Zoom function is not available whenwatching High Definition material.NPlaylist Button: Press this button tochange the

47、 playback order of the disc.ORandom Button: Press for RANDOMplayback in random order.PA-B Button: Press to select section A-B andto play repeatedly.QVolume Up/Down: Increase/decrease the master volume level.?LIGHT Button: Press to illuminate remote controller.?Numeric Keys Button: Select numbers by

48、pressing these buttons.?Repeat Button: Press to go to the Repeatmenu.You can repeat a chapter, track or theentire disc.?Clear Button: Press to remove the Bannermenu from the screen.?Video output Button: Press to togglebetween the S-Video, Component Video Outputsand SCART RGB video output of the HS S

49、ysremplayer. Note that the Composite and SCARTComposite Video Outputs on the player arealways active, which could help you make yourinitial setup.?Video format Button: Press this button tochange the resolution of the Component VideoOutput between standard definition andprogressive definition (PAL in

50、terlaced and PALprogressive; NTSC interlaced and NTSCprogressive).?Learn Button: Press this button to beginthe process of “learning” the codes from anotherproducts remote into the HS Systems remote.(See page 26 for more information on using theremotes learning function.)?to ?These buttons do not hav