Yamaha-DVRC310-hts-sm 维修电路原理图.pdf

《Yamaha-DVRC310-hts-sm 维修电路原理图.pdf》由会员分享，可在线阅读，更多相关《Yamaha-DVRC310-hts-sm 维修电路原理图.pdf（40页珍藏版）》请在收音机爱好者资料库上搜索。

1、SERVICE MANUALThis manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are alreadyknown and understood by the users, and have therefore not b

2、een restated.WARNING:Failure to follow appropriate service and safety procedures when servicing this product may result in personalinjury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,we advise all YAMAHA product owners that any service r

3、equired should be performed by an authorized YAMAHARetailer or the appointed service representative.IMPORTANT:The presentation or sale of this manual to any individual or firm does not constitute authorization, certification orrecognition of any applicable technical capabilities, or establish a prin

4、ciple-agent relationship of any form.The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and servicedepartments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable andspecifi

5、cations are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact thedistributors Service Division.WARNING:Static discharges can destroy expensive components. Discharge any static electricity your body may haveaccumulated by grounding your

6、self to the ground buss in the unit (heavy gauge black wires connect to this buss).IMPORTANT:Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.IMPORTANT NOTICE101015SERVICE MANUALINTERNAL VIEW .8REPAIR NOTES.8DISASSEMBLY PROCEDURES .910BLO

7、CK DIAGRAM.12WIRING DIAGRAM .13PRINTED CIRCUIT BOARDS .1422SCHEMATIC DIAGRAMS .2337REPLACEMENT PARTS LIST.3839I CONTENTSTO SERVICE PERSONNEL .23PREVENTION OF ELECTROSTATIC DISCHARGE .4LOCALE MANAGEMENT INFORMATION .4SYSTEM COMPOSITION .5FRONT PANEL .5REAR PANEL .6REMOTE CONTROL PANEL.6SPECIFICATIONS

8、.67DIMENSIONS .7DVX-C310 consists of the DVR-C310 and NX-P300.DVX-C310SW consists of the DVR-C310 and NX-SW300.This service manual is for the DVR-C310.For the NX-P300 and NX-SW300 service manual, please refer to the following publicationnumber :DVR-C310DVD HOME THEATER SOUND SYSTEM DVX-C310/DVX-C310

9、SWDVR-C310DVR-C300/NX-P300 (Including NX-SW300)100946 2006 YAMAHA CORPORATION. All rights reserved.This manual is copyrighted by YAMAHA and may not be copied orredistributed either in print or electronically without permission. 06.07RadioFans.CN 收音机爱 好者资料库2DVR-C310DVR-C310ITO SERVICE PERSONNEL1. Cri

10、tical Components InformationComponents having special characteristics are marked Zand must be replaced with parts having specifications equalto those originally installed.2. Leakage Current Measurement (For 120V Models Only)When service has been completed, it is imperative to verifythat all exposed

11、conductive surfaces are properly insulatedfrom supply circuits.GMeter impedance should be equivalent to 1500 ohmsshunted by 0.15F.GLeakage current must not exceed 0.5mA.GBe sure to test for leakage with the AC plug in bothpolarities.AC LEAKAGETESTER OREQUIVALENTEQUIPMENTUNDER TESTINSULATINGTABLEWALL

12、OUTLETWARNING: Laser SafetyThis product contains a laser beam component. This component may emit invisible, as well as visible radiation,which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions mustbe used during servicing of the unit.1) When testing

13、and/or repairing any component within the product, keep your eyes and skin more than 30 cm away fromthe laser pick-up unit at all times. Do not stare at the laser beam at any time.2) Do not attempt to readjust, disassemble or repair the laser pick-up, unless noted elsewhere in this manual.3) CAUTION

14、 : Use of controls, adjustments or performance of procedures other than those specified herein may result inhazardous radiation exposure.WARNING: CHEMICAL CONTENT NOTICE!The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/orplastic (where app

15、licable) components may also contain traces of chemicals found by the California Health andWelfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm.DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FORANY REASON WHATSOE

16、VER!Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumesor expose eyes to solder/flux vapor!If you come in contact with solder or components located inside the enclosure of this product, wash your handsbefore handling food.Laser Emitting condi

17、tions:1) When the Top Cover is removed, and the STANDBY/ON SW is turned to the ON position, the laser component willemit a beam for several seconds to detect if a disc is present. During this time (5-10 sec.) the laser may radiate throughthe lens of the laser pick-up unit. Do not attempt any servici

18、ng during this period!If no disc is detected, the laser will stop emitting the beam. When a disc is loaded, you will not be exposed to any laseremissions.2) The laser power level can be adjusted with the VR on the pick-up PWB, however, this level has been set by the factoryprior to shipping from the

19、 factory. Do not adjust this laser level control unless instruction is provided elsewhere in thismanual. Adjustment of this control can increase the laser emission level from the device.THE DVD AUDIO/VIDEO PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIEDSERVICE PERSONNEL

20、.RadioFans.CN 收音机爱 好者资料库3DVR-C310DPX-1200DVR-C310Laser Diode PropertiesType:Semiconductor laser GaAlAsWave length:650 nm (DVD)784 nm (VCD/CD)Output Power:7 mW (DVD/VCD/CD)Beam divergence:60 degreeVARO!: AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NKYMTTMLLELASER-STEILYLLE. L KATSO STEESEEN

21、.VARNING! : OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD OCH SPRREN R URKOPPLAD.BETRAKTA EJ STRLEN.WARNINGThe use of optical instruments with this product will increase eye hazard.Repair handling should take place as much as possible with a disc loaded inside the player.CAUTIONVISIBLE AND INVISIBLE LA

22、SER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAMADVARSELSYNLIG OG USYNLIG LASERSTRLING VED BNING UNDG UDSTTELSE FOR STRLINGADVARSELSYNLIG OG USYNLIG LASERSTRLING NR DEKSEL PNES UNNG EKSPONERING FOR STRLENVARNINGSYNLIG OCH OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD BETRAKTA EJ STRLENVARO !AVATTAESSA O

23、LET ALTTIINA NKYVLLE JANKYMTTMLLE LASER STEILYLLE, L KATSO STEESEENVORSICHTSICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEFFNET NICHT DEM STRAHL AUSSETSENDANGERVISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAMATTENTIONRAYONNEMENT LASER VISIBLE ET INVISIBLE EN C

24、AS DOUVERTURE EXPOSITION DANGEREUSE AU FAISCEAUWarning for power supplyThe primary side of the power supply carries live mains voltage when the player is connected to the mainseven when the player is switched off !This primary area is not shielded so it is possible to touch copper tracks and/or comp

25、onents when servicing the player.Service personnel have to take precautions to prevent touching this area or components in this area.Note:The screws on the DVD mechanism may never be touched, removed or re-adjusted.Handle the DVD mechanism with care when the unit has to be exchanged!The DVD mechanis

26、m is very sensitive for dropping or giving shocks.4DVR-C310DVR-C310I PREVENTION OF ELECTROSTATIC DISCHARGEI LOCALE MANAGEMENT INFORMATIONLocale Management Information : This DVD player is designed and manufactured to respond to the LocaleManagement Information that is recorded on a DVD disc. If the

27、Locale number described on the DVD disc does notcorrespond to the Locale number of this DVD player, this DVD player cannot play this disc.This product incorporates copyrightprotection technology that is protected bymethod claims of certain U.S. patents andother intellectual property rights owned byM

28、acrovision Corporation and other rightsowners. Use of this copyright protectiontechnology must be authorized byMacrovision Corporation, and is intendedfor home and other limited viewing usesonly unless otherwise authorized byMacrovision Corporation. Reverseengineering or disassembly is prohibited.qw

29、rwttrwyetThe laser diode in the traverse unit (optical pickup) may be damaged due to static electricity from clothes or the humanbody. Use caution to prevent electrostatic damage when servicing or handling the laser diode.1. Grounding for electrostatic damage prevention1. Worktable groundingPut a gr

30、ounded conductive material (sheet) or iron sheet on the area where the optical pickup is placed.2. Human body groundingUse an anti-static wrist strap to discharge the static electricity from your body.2. Handling of the optical pickup1. To prevent damage to the optical pickup replacement parts durin

31、g transportation and before installation, both endsof the laser diode are short-circuited. After installing the new part, remove the short circuit according to the correctprocedure in this service manual.2. Do not use a tester to check the laser diode in the optical pickup. The power supply in the t

32、ester will damage thelaser diode.3. Handling Precautions for the Traverse Unit (Optical Pickup)1. Handle the traverse unit (optical pickup) gently, as it is an extremely high-precision assembly.2. The flexible cable lines may break if an excessive force is applied to it. Use caution when handling th

33、e cable.3. The semi-fixed resistor for laser power adjustment should not be adjusted. Do not turn the resistor.1MConductive material(sheet) or steel sheetAnti-static wrist strap5DVR-C310DPX-1200DVR-C310NX-SW300NX-F300NX-S300NX-C300DVR-C310DVX-C310 consists of the DVR-C310 and NX-P300.DVX-C310SW cons

34、ists of the DVR-C310 and NX-SW300.I SYSTEM COMPOSITIONI FRONT PANELNX-P300For the NX-P300 and NX-SW300 service manual, please refer to the DVR-C300/NX-P300 (Including NX-SW300)service manual (number : 100946).6DVR-C310DVR-C310I SPECIFICATIONSTUNER SECTIONFM Tuning Range87.50 to 108.00 MHzAM Tuning R

35、ange530 to 1700 kHzDISC SECTIONLaser TypeSemiconductorDisc Diameter12cm / 8cmVideo DecodingMPEG-1 / MPEG-2/ DivX 5, DivX 4, DivX 3Video DAC12 bits/108 MHzSignal SystemPAL / NTSCVideo Format4:3 / 16:9Composite Video Output1.0 Vp-p, 75 ohmsS-video OutputY - 1.0 Vp-p, 75 ohmsC - 0.3 Vp-p, 75 ohmsCompon

36、ent Video OutputY - 1.0 Vp-p, 75 ohmsPB/CB PR/CR 0.7 Vp-p, 75 ohmsAudio DAC24 bits / 192 kHzFrequency Response4 Hz to 20 kHz (44.1 kHz)I REMOTE CONTROL PANELI REAR PANELM DVR-C310 (U, C models)4 Hz to 22 kHz (48 kHz)4 Hz to 44 kHz (96 kHz)Audio S/N105 dBDistortion0.0035 %Dynamic Range95 dBAUDIO FORM

37、ATDigitalDolby Digital/DTS/MPEGCompressed DigitalPCM16, 20, 24 bitsfs 44.1, 48, 96 kHzMP3 (ISO 9660)24, 32, 56, 64, 96, 128, 256 kbpsfs 16, 22.05, 24, 32, 44.1, 48 kHzWMA32 to 192 kbps, mono, stereoFull decoding of Dolby Digital and DTS multi-channel sound/Dolby Surround Compatible Downmix from Dolb

38、y Digital multi-channel soundDolby Pro Logic II7DVR-C310DPX-1200DVR-C310GENERALPower Supply Rating U, C models120 V, 60 HzPower Consumption20 WFrequency Response20 Hz to 20 kHz / 3 dB(Front, Center, Surround)Signal to Noise Ratio 100 dBInput Sensitivity AUX In, TV In300 mVDimensions (W x H x D)435 x

39、 75 x 434 mm(17-1/8 x 2-15/16 x 17-1/16)Weight5.6 kg (12 lbs. 5 oz.)FinishBlack color (U, C models)Silver color (U, C models)ACCESSORIESRemote Control x1Battery x2Indoor FM Antenna x1AM Loop Antenna x1Video Pin Cable (1.5m) x1System Control Cable (4m) x1* Specifications subject to change without pri

40、or notice.PLAYXCHANGECapable of changing discs without interrupting current disc playback.Pressing PLAYXCHANGE on the front panel to open the disc tray and reload or unload discs during playback.Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, “MLP Lossless” and the double-D

41、 symbol are trademarks of Dolby Laboratories.“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.“DivX”, “DivX Certified”, and associated logos are trademarks of DivXNetworks, Inc. and are used under license.The XM name and related logos are registered trademar

42、ks of XM Satellite Radio Inc.iPod“iPod” is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.75(2-15/16)434 (17-1/16)435 (17-1/8)I DIMENSIONSUnit : mm (inch)8DVR-C310DVR-C310I REPAIR NOTES1. DVD 5-Disc Changer ModuleThe DVD 5-disc changer module consists of the CMunit a

43、nd tray assy. The DVD 5-disc changrer moduleis supplied as a whole. Neither the CM unit nor trayassy can be supplied independently.2. P.C.B. ASSYNone of the components of the following unit can besupplied separately. Each unit must be replaced as awhole in case of a failure.MONO P.C.B.FRONT P.C.B.AV

44、 P.C.B.XM P.C.B.HDMI P.C.B.Power Supply Unit3. Power Supply UnitNever touch the potentiometer (VR1) installed to thepower supply unit.VR1Power Supply UnitI INTERNAL VIEWq POWER SUPPLY UNITw FRONT (4) P.C.B.e DVD 5-DISC CHANGER MODULEr XM P.C.B.t AV P.C.B.y HDMI P.C.B.u TUNERi MONO P.C.B.o FRONT (2)

45、P.C.B.!0 FRONT (3) P.C.B.!1 FRONT (1) P.C.B.qewrytuio!0!19DVR-C310CN11102(AV P.C.B.)111014011504150214041101(AV P.C.B.)120113031101(XM P.C.B.)CNACNBView AAAV P.C.B.Power Supply UnitFRONT (4) P.C.B.XM P.C.B.HDMI P.C.B.MONO P.C.B.1101 (HDMI P.C.B.)1400FRONT (3) P.C.B.FRONT (2) P.C.B.FRONT (1) P.C.B.11

46、01 (MONO P.C.B.)130511051301130411041102 (MONO P.C.B.)1302 (MONO P.C.B.)I DISASSEMBLY PROCEDURESSee overall assy for item numbersMountingDismountingFRONT (1) P.C.B. 1001 (1) Remove cable connection. 1302 (FRONT (3) P.C.B.) Remove 7 screws. 252 Dismount P.C.B. Remove knob. 121 Remove nut.FRONT (2) P.

47、C.B. 1001 (2) Remove cable connections. 1303 Remove 6 screws. 252 Dismount P.C.B.Front Panel 101 Remove 3 cable connections. 11051504CNBRemove 2 screws. 260(Bracket front to bottom frame) Unlock front panel from frame byreleasing successively 4 snaps. (2 on the side and 2 on the bottom) Remove 2 scr

48、ews. (Fig. 1) Dismount clamper assy. (Fig. 1) Solder the lands of the optical pick up.(Fig. 2)Top Cover 240 Remove 7 screws. 250 (4 on side and 3 on rear side) Lift top cover from rear side to remove.MONO P.C.B. 1007 Remove 8 cable connections. 1101 (MONO P.C.B.) 1102 (MONO P.C.B.) 110411051301 1302

49、 (MONO P.C.B.) 13041305 Remove 4 screws. 260 (P.C.B. to bottom frame) Dismount P.C.B.Power Supply Unit 1004 Open tray. (See How to Remove 3 cable connections. CN1CNACNB Remove 2 screws. 260(P.C.B. to bottom frame) Release 2 spacers locking.(P.C.B. to bottom frame) Dismount power supply unit.FRONT (4

50、) P.C.B. 1001 (4) Open tray. (See How to Remove cable connection. 1400 Remove 2 screws. 252 (P.C.B. to rear panel) Dismount P.C.B.Bracket Front Remove 4 screws. 252 (Bracket front to front panel) Remove bracket front.FRONT (3) P.C.B. 1001 (3) Remove 2 screws. 251 Dismount P.C.B.Tray DVD 5-Disc Chang