JVC-FSMD9000-cs-sm 维修电路原理图.pdf

《JVC-FSMD9000-cs-sm 维修电路原理图.pdf》由会员分享，可在线阅读，更多相关《JVC-FSMD9000-cs-sm 维修电路原理图.pdf（30页珍藏版）》请在收音机爱好者资料库上搜索。

1、PRESETTUNINGAHB.SUPER PROTAPE/AUXMD/TAPETUNERBANDCDOPEN/CLOSESLEEPCLOCKUPMULTI CONTROLDOWNULTRAMICROCOMPONENTSYSTEMFS-MD9000VOLUMECDTUNERBANDMDDOWNSETUPVOLUMECDTUNERBANDMDDOWNSETUPTREBLECANCELBASSRANDOMREPEATPROGRAMAUTOPRESETDISPLAY/CHARAEDIT/TITLEAHB.SUPER PROFM MODE TAPE/AUXCLOCKSLEEPDIMMERREMOTE

2、CONTROL RM-RXFSMD9000POWERPRESETTUNINGAHB.SUPER PROTAPE/AUXVOLUMETUNERBANDCDMDCDMDOPEN/CLOSETIMER/SNOOZECLOCKUPMULTI CONTROLDOWNLTRACOMPACTCOMPONENTSYSTEFS-MD9000RECPAUSECD SYNCHRORECUPDOWNEJECTPOWERUPDOWNBand display, Frequency display,Preset channelAUTO PRESETTUNER BAND4PRESET TUNINGTUNERBANDWhen

3、the System is in use, the displayshows other items as well.For simplicity, we show here only theitems described in this section.FM MODEFM modeindicatorsYou can listen to FM and AM stations. Stations can be tuned inmanually, automatically, or from preset memory storage.IBefore listening to the radio:

4、Check that both the FM and AM antennas are correctly con-nected. (See page 3).One Touch Radio -XVWSUHVVWKH781(5%$1EXWWRQWRWXUQRQWKH6VWHPDQGVWDUWSODLQJWKHVWDWLRQRXZHUHODVWWXQHGWRI, and button:Increases the tenth digit for preset number. button, then press the UP button twice (or simply press the UP b

5、utton 12 times.).ORIPreset Tuning using the Unit (Possible only af-ter presetting stations)Press the PRESET TUNING button to select the desired preset number. Its band and frequency are displayed. You can preset up to 30 FM stations and up to 15 AM stations usingthe Remote Control.Note: Preset numbe

6、rs may have been set to factory test frequen-cies prior to shipment. This is not a malfunction. You can preset the stations you want into memory by following one of the presetting methods below.Manual PresettingI1.Select a band by pressing the TUNER BAND button.I2.Press the 4 or button to tune in a

7、sta-tion.I3.Press the SET button.P 1 will blink.I4.Press the UP, DOWN, , or button:Increases the tenth digit for preset number.VOLUMECDTUNERBANDMDDOWNSETUPTREBLECANCELBASSRANDOMREPEATPROGRAMAUTOPRESETDISPLAY/CHARAEDIT/TITLEAHB.SUPER PROFM MODE TAPE/AUXCLOCKSLEEPDIMMERREMOTE CONTROL RM-RXFSMD9000POWE

8、RPRESETTUNINGPOWERTAPE/AUXVOLUMETUNERBANDCDMDCDMDOPEN/CLOSETIMER/SNOOZECLOCKUPMULTI CONTROLDOWNULTRACOMPACTCOMPONENTSYSTEMFS-MD9000RECPAUSECD SYNCHRORECUPDOWNEJECTAHB.SUPER PROSETDOWNCD 387Repeat indicatorCD HolderMusic calender47CD 0CD 38Play mode indicatorTrack number, Playing time, Preset numberO

9、VER indicator which lights up if the number of tracks of the CD exceeds 20.When the System is in use, the display shows other items as well.For simplicity, we show here only the items described in this section.4To Insert a CDSTANDBYFS-MD9000(J)-e.fm Page 9 Thursday, July 30, 1998 1:19 PM10EnglishIYo

10、u can place an 8 cm (3) CD without an adaptor.IIf the CD cannot be read correctly (because it is scratched, for example), 0 0:00 appears on the display.IYou can insert a CD while listening to the other source. To Play a CD I1. Insert a CD.I2. Press the CD 38 button.The first track of the CD begins p

11、laying.The track number that has been played disappears from the music calender.The CD Player automatically stops when the last track of the CD has finished playing.To stop playing the CD, press the 7 button.The following information for the CD is displayed.To stop playing and remove the CD, press t

12、he CD0 button toopen the CD holder.To pause, press the CD38 button. The playback time blinks onthe display.To cancel pause, press the same button again. Play continuesfrom the point where it was paused.To Select a Track or Passage within a Track During playback, press the 4 or button to select the t

13、rack youwant.The selected track starts playing.3UHVVWKHEXWWRQRQFHWRVNLSWRWKHEHJLQQLQJRIWKHQHWWUDFN3UHVVWKH4EXWWRQWRVNLSWRWKHEHJLQQLQJRIWKHWUDFNEHLQJSODHG3UHVVWZLFHTXLFNOWRVNLSWRWKHEHJLQQLQJRIWKHSUHYLRXVWUDFNSearch PlayHolding down the 4 or button, during playback, will fast for-ward/backwards the CD

14、 so you can quickly find a particular pas-sage in the track you are listening to. You can program the playing order of the tracks using the RemoteControl.IYou can program up to 20 tracks in any desired order including the same tracks.IYou can only make a program when the CD Player is stopped.I1. Ins

15、ert a CD.I2. Press the CD 38 button. I3. Press the 7 button to stop the CD.I4.Press the PROGRAM button.The System enters the programming mode and the “CD PRO-GRAM” indicator lights up.I5.Press the UP, DOWN, , or button:Increases the tenth digit of the track number. button, then press the UP button t

16、wice (or simply press the UP button 12 times).I6.Press the SET button.I7.Repeat steps 5 and 6 to select the other tracks for the program.You can see the total playback time of programmed tracks on the display. Also, you can see the programmed tracks on the music calender.I8.Press the CD 38 button.Th

17、e System plays the tracks in the order you have programmed them.IYou can skip to a particular program track by pressing the 4 or button during Program Play.ITo stop playing, press the 7 button once.To confirm the programmed tracks while the CD player isstopped, press the 4 or button; the tracks maki

18、ng up theprogram will successively be displayed in the programmed order.To delete all the tracks in the program, press the 7 button re-peatedly until all the tracks are cleared. Turning off the power orpressing the CD 0 button to open the CD holder will also clear theprogrammed tracks.To exit the pr

19、ogram mode once, while the CD Player isstopped, press the PROGRAM button to light off the CD PRO-GRAM indicator.Notes:If the total playback time of the programmed tracks exceeds 99 minutes 59 seconds, the total playback time will go out on the display.When the CD contains more than 21 tracks:When yo

20、u try to program a track number exceeding 20 (for example the 25th track), the total playback time indication will go out, though programming is possible.To Modify the Program Modify the contents of the program while the CD Player is stopped.Each time you press the 7 button, the last track in the pr

21、ogram is de-leted. To add new tracks to the end of the program, repeat abovesteps 5 to 7.The tracks will play in no special order when you use this mode.I1. Press the RANDOM button on the Remote Control.The CD RANDOM indicator lights up on the display.Basics of Using the CD Player-Normal PlayProgram

22、ming the Playing Order of the TracksTrack numberPlayback timeTotal track numberTotal playback timeRandom PlayPROGRAMDOWNUPSETProgram order numberTotal playback time of the programmed tracks(After 2 seconds)FS-MD9000(J)-e.fm Page 10 Thursday, July 30, 1998 1:19 PM11EnglishI2.Press the CD 38 button.Th

23、e tracks are played in random order.To skip a track during playback, press the button to jumpto the next track in the random sequence. Press the 4 button tojump back to the start of a track being played.To exit Random Play mode, press the RANDOM button to lightoff the CD RANDOM indicator and carry o

24、ut Normal Play orProgram Play, or press the CD0 button to open the CD holder.You can set the program or individual track playing to repeat asmany times as you like.Press the REPEAT button on the Remote Control.The Repeat indicator changes with each press of the button, asshown below.=ALL =blank disp

25、lay = (back to the beginning) : Repeats one track. ALL : In Normal Play mode, repeats all the tracks.In Program Play mode, repeats all the tracks in the program.In Random Play mode, repeats all the tracks in ran-dom order.To exit Repeat mode, press the REPEAT button until the Repeatindicator on the

26、display goes out.IIn Random Play, as a matter of course, cannot be selected.IRepeat mode remains on the display even when you change the play mode.I IUsing the MD Player (Listening to an MD)You can use Normal, Random, Program or Repeat Play in the sameway as for CD Player. Repeat Play can repeat all

27、 the tracks or justone of the tracks on the MD.Here are the basic things you need to know to play an MD and locatethe different tracks on it.The Quickest Way To Start an MD Is With the One Touch OperationIPress the MD38 button.The power is automatically turned on. If an MD is already inserted, it wi

28、ll start playing from the first track. If no MD is inserted, NO DISC appears on the display and the MD Player remains in Stop mode.IInsert an MD into the MD slot.Insert it with its label side up and the # or mark of the MD directs as shown in the figure.The MD is automatically drawn inside the MD Pl

29、ayer and the red MD indicator on the front of the Unit lights up.IYou can insert an MD while listening to the other source.To Play an MD I1. Insert an MD.The MD indicator lights up.I2. Press the MD 38 button.The first track of the MD begins playing. (The MD indicator stays lit.)The tracks in the MD

30、appear on the music calender.The track number that has been played disappears from the music calender.The MD Player automatically stops when the last track of the MD has finished playing.IIf the MD has the disc title, the disc title is displayed before playing the first track.IIf the track has the t

31、itle, the track title will be displayed before playing the track.You can give the disc title and the track title as required. (See page 17.)Repeating TracksDOWNMD 38Track number, Playing time, Preset number4Repeat indicatorPROGRAM7, or button:Increases the tenth digit of the track number. button, th

32、en press the UP button twice (or simply press the UP button 12 times).I6.Press the SET button.I7.Repeat steps 5 and 6 to select the other tracks for the program.You can see the total playback time of programmed tracks on the display. Also, you can see the programmed tracks on the music calender.I8.P

33、ress the MD 38 button.The System plays the tracks in the order you have programmed them.IYou can skip to a particular program track by pressing the 4 or button during Program Play.ITo stop playing, press the 7 button.To confirm the programmed tracks while the MD Player isstopped, press the 4 or butt

34、on; the tracks making up theprogram will successively be displayed in the programmed order.To delete all the tracks in the program, press the 7 button re-peatedly until all the tracks are cleared. Turning off the power orpressing the MD 0 button to eject the MD will also clear the pro-grammed tracks

35、.To exit the program mode once, while the MD Player isstopped, press the PROGRAM button to light off the MD PRO-GRAM indicator.Note: If the total playback time of the programmed tracks exceeds 150 minutes, the total playback time will go out on the dis-play.To Modify the Program Modify the contents

36、of the program while the MD Player is stopped.Each time you press the 7 button, the last track in the program is de-leted. To add new tracks to the end of the program, repeat abovesteps 5 to 7.The tracks will play in no special order when you use this mode.I1. Press the RANDOM button on the Remote C

37、ontrol.The MD RANDOM indicator lights up on the display.I2.Press the MD 38 button.The tracks are played in random order.To skip a track during playback, press the button to jumpto the next track in the random sequence. Press the 4 button tojump back to the start of a track being played.To exit Rando

38、m Play mode, press the RANDOM button to lightoff the “MD RANDOM” indicator and carry out Normal Play orProgram Play, or press the MD 0 button to eject the MD.You can set the program or individual track playing to repeat asmany times as you like.Press the REPEAT button on the Remote Control.The Repea

39、t indicator changes with each press of the button, asshown below.Programming the Playing Order of the TracksTotal track numberTotal playback timePROGRAMRandom PlayRepeating TracksDOWNUPSETProgram order numberTotal playback time of the programmed tracks(After 2 seconds)FS-MD9000(J)-e.fm Page 12 Thurs

40、day, July 30, 1998 1:19 PM13English=ALL= blank display = (back to the beginning): Repeats one track.ALL : In Normal Play mode, repeats all the tracks.In Program Play mode, repeats all the tracks in the program.In Random Play mode, repeats all the tracks in ran-dom order.To exit Repeat mode, press th

41、e REPEAT button until the Repeatindicator on the display goes out.IIn Random Play, as a matter of course, cannot be selected.IRepeat mode remains on the display even when you change the play mode.I IRecording onto an MD Recording onto an MD from any of the sound sources is simple. Justinsert an MD t

42、o the Unit, have the source ready, make one or twosettings, and you are ready to record. For each source, the procedureis a little bit different so we explain each separately. But first, hereare a few things to make your recordings better.Things To Know Before You Start Recording IIt should be noted

43、 that it may be unlawful to re-record pre-recorded tapes, records, or discs without the con-sent of the owner of copyright in the sound or video re-cording, broadcast or cable program and in any literary, dramatic, musical, or artistic work embodied therein.ICarefully read the “Rules of Digital Dubb

44、ing” on page 23.IThe MD Recorder supports the following sampling frequencies for digital sources.For the OPTICAL DIGITAL IN (AUX2): 32 kHz, 44.1 kHz and 48 kHz.For the CD Player of the Unit: 44.1 kHz.IThe recording level, which is the volume at which the new MD is being made, is automatically set co

45、rrectly, so it is not affected by the VOLUME level of the System. Nor it is affected by ad-justing the sound effects. Thus, during recording you can adjust the sound you are actually listening to without affecting the re-cording level.IThe accidental erasure prevention knob is provided on the back o

46、f an MD cartridge to prevent accidental erasure or recording. It must be set to the close position beforehand.IWhen you stick an adhesive label onto the MD cartridge, adhere it securely. If it peels off, ejection trouble, etc. will occur.Preparation Before RecordingIBe sure that the MD is not the Pl

47、ay-only type one.IBe sure that the accidental erasure prevention knob of the MD cartridge is set to the close position. Otherwise, DISC PRO-TECTED will appear when you try to record a signal to the MD.IBe sure that the MD has enough space for recording. If not, car-ry out ALL ERASE or ERASE function

48、 to erase all the tracks or desired tracks in the MD. (See pages 16-17.) You can check the recordable remaining time of the MD in Stop mode or dur-ing recording by pressing the DISPLAY/CHARA button. (See Checking the Remaining Time of the MD mentioned on page 14.)Indication of the MD Indicator for R

49、ecordingThe MD indicator on the front panel of the Unit blinks as follow.Record-pause mode:Blinks rapidly.During recording:Blinks slowly.MD inserted or played: Stays lit.You can record any sound source to an MD as follows.I1. Insert a MD with its label side up.The MD indicator lights up.I2. Prepare

50、one of the sources.CD: Use the CD Synchro Recording mentioned below.Tuner: Tune in to a station.AUX1 (LINE IN (AUX1): Press the TAPE/AUX button on the Unit or the Remote Control until “AUX 1 ANALOG IN” ap-pears on the display.AUX2 (OPTICAL DIGITAL IN (AUX2): Press the TAPE/AUX button on the Unit or