JVC-RCBX30-cs-sm 维修电路原理图.pdf

《JVC-RCBX30-cs-sm 维修电路原理图.pdf》由会员分享，可在线阅读，更多相关《JVC-RCBX30-cs-sm 维修电路原理图.pdf（30页珍藏版）》请在收音机爱好者资料库上搜索。

1、RC-BX30No.21171Dec. 2002COPYRIGHT 2002 VICTOR COMPANY OF JAPAN, LTD.SERVICE MANUALContentsSafety precautionsPreventing static electricityImportant for laser productsDisassembly methodAdjustment methodTrouble shooting1-21-31-41-51-141-17RC-BX30 Area suffixUJ - U.S.MilitaryFlow of functional operation

2、 until TOC readMaintenance of laser pickupReplacement of laser pickupDescription of major ICsWiring connection1-181-191-191-201-22CD PORTABLE SYSTEMRadioFans.CN 收音机爱 好者资料库RC-BX301-21. This design of this product contains special hardware and many circuits and components specially for safety purposes

3、. For continued protection, no changes should be made to the original design unless authorized in writing by the manufacturer. Replacement parts must be identical to those used in the original circuits. Services should be performed by qualified personnel only.2. Alterations of the design or circuitr

4、y of the product should not be made. Any design alterations of the product should not be made. Any design alterations or additions will void the manufacturers warranty and will further relieve the manufacture of responsibility for personal injury or property damage resulting therefrom.3. Many electr

5、ical and mechanical parts in the products have special safety-related characteristics. These characteristics are often not evident from visual inspection nor can the protection afforded by them necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Replacemen

6、t parts which have these special safety characteristics are identified in the Parts List of Service Manual. Electrical components having such features are identified by shading on the schematics and by ( ) on the Parts List in the Service Manual. The use of a substitute replacement which does not ha

7、ve the same safety characteristics as the recommended replacement parts shown in the Parts List of Service Manual may create shock, fire, or other hazards.4. The leads in the products are routed and dressed with ties, clamps, tubings, barriers and the like to be separated from live parts, high tempe

8、rature parts, moving parts and/or sharp edges for the prevention of electric shock and fire hazard. When service is required, the original lead routing and dress should be observed, and it should be confirmed that they have been returned to normal, after re-assembling.5. Leakage currnet check (Elect

9、rical shock hazard testing)After re-assembling the product, always perform an isolation check on the exposed metal parts of the product (antenna terminals, knobs, metal cabinet, screw heads, headphone jack, control shafts, etc.) to be sure the product is safe to operate without danger of electrical

10、shock.Do not use a line isolation transformer during this check.Plug the AC line cord directly into the AC outlet. Using a Leakage Current Tester, measure the leakage current from each exposed metal parts of the cabinet, particularly any exposed metal part having a return path to the chassis, to a k

11、nown good earth ground. Any leakage current must not exceed 0.5mA AC (r.m.s.).Alternate check methodPlug the AC line cord directly into the AC outlet. Use an AC voltmeter having, 1,000 ohms per volt or more sensitivity in the following manner. Connect a 1,500 10W resistor paralleled by a 0.15 F AC-t

12、ype capacitor between an exposed metal part and a known good earth ground.Measure the AC voltage across the resistor with the AC voltmeter. Move the resistor connection to each exposed metal part, particularly any exposed metal part having a return path to the chassis, and meausre the AC voltage acr

13、oss the resistor. Now, reverse the plug in the AC outlet and repeat each measurement. Voltage measured any must not exceed 0.75 V AC (r.m.s.). This corresponds to 0.5 mA AC (r.m.s.). 1. This equipment has been designed and manufactured to meet international safety standards.2. It is the legal respon

14、sibility of the repairer to ensure that these safety standards are maintained.3. Repairs must be made in accordance with the relevant safety standards.4. It is essential that safety critical components are replaced by approved parts.5. If mains voltage selector is provided, check setting for local v

15、oltage.Good earth groundPlace this probe on each exposedmetal part.AC VOLTMETER(Having 1000 ohms/volts,or more sensitivity)1500 10W0.15 F AC TYPE!Burrs formed during molding may be left over on some parts of the chassis. Therefore, pay attention to such burrs in the case of preforming repair of this

16、 system.In regard with component parts appearing on the silk-screen printed side (parts side) of the PWB diagrams, the parts that are printed over with black such as the resistor ( ), diode ( ) and ICP ( ) or identified by the mark nearby are critical for safety. (This regulation does not correspond

17、 to J and C version.)RadioFans.CN 收音机爱 好者资料库RC-BX301-3Conductive material (conductive sheet) or iron plate(caption)Anti-static wrist strapShort landFiexible wireCD pickup unit5. Attention when traverse unit is decomposed*Please refer to Disassembly method in the text for the CD pickup unit. Apply so

18、lder to the short land before the flexible wire is removedfrom the CD servo board. (If the flexible wire is disconnected without applying solder, the CDpickup unit may be destroyed by static electricity.) In the assembly, be sure to remove solder from the short land after connecting the fiexible wir

19、e.Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged, can destroy the laser diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs.Preventing static electricity1. Grounding to prevent damage by st

20、atic electricityStatic electricity in the work area can destroy the optical pickup (laser diode) in devices such as CD players.Be careful to use proper grounding in the area where repairs are being performed. 2. About the earth processing for the destruction prevention by static electricityGround th

21、e workbench by laying conductive material (such as a conductive sheet) or an iron plate over it before placing the traverse unit (optical pickup) on it.2-1 Ground the workbench2-2 Ground yourselfUse an anti-static wrist strap to release any static electricity built up in your body. In order to maint

22、ain quality during transport and before installation, both sides of the laser diode on the replacement optical pickup are shorted. After replacement, return the shorted parts to their original condition. (Refer to the text.)Do not use a tester to check the condition of the laser diode in the optical

23、 pickup. The testers internal power source can easily destroy the laser diode. 3. Handling the optical pickup1.2. Do not subject the traverse unit (optical pickup) to strong shocks, as it is a sensitive, complex unit.Remove solder of the short land on the flexible wire after replacing the optical pi

24、ckup. For specific details, refer to the replacement procedure in the text. Remove the anti-static pin when replacing the traverse unit.Be careful not to take too long a time when attaching it to the connector.Handle the flexible wire carefully as it may break when subjected to strong force.It is no

25、t possible to adjust the semi-fixed resistor that adjusts the laser power. Do not turn it.4. Handling the traverse unit (optical pickup)1.2.3.4.RC-BX301-4Important for laser products1.CLASS 1 LASER PRODUCT2.DANGER : Invisible laser radiation when open and inter lock failed or defeated. Avoid direct

26、exposure to beam.3.CAUTION : There are no serviceable parts inside theLaser Unit. Do not disassemble the Laser Unit. Replace the complete Laser Unit if it malfunctions.4.CAUTION : The compact disc player uses invisible laserradiation and is equipped with safety switches whichprevent emission of radi

27、ation when the drawer is open and the safety interlocks have failed or are de feated. It is dangerous to defeat the safety switches.5.CAUTION : If safety switches malfunction, the laser is able to function.6.CAUTION : Use of controls, adjustments or performance of procedures other than those specifi

28、ed herein may result in hazardous radiation exposure.VARNING : Osynlig laserstrlning nr denna del r ppnad och sprren r urkopplad. Betrakta ej strlen.VARO : Avattaessa ja suojalukitus ohitettaessa olet alttiina nkymttmlle lasersteilylle.l katso steeseen.ADVARSEL : Usynlig laserstrling ved bning , nr

29、sikkerhedsafbrydere er ude af funktion. Undgudsttelse for strling.ADVARSEL : Usynlig laserstrling ved pning,nr sikkerhetsbryteren er avslott. unng utsettelse for strling.REPRODUCTION AND POSITION OF LABELSCLASS 1LASER PRODUCT!CAUTIONPlease use enough caution not to see the beam directly or touch it

30、in case of an adjustment or operationcheck.RC-BX301-5Fig.1Fig.2Fig.3Fig.4Removing the front cabinet assembly and rear cabinet assembly(See Figs. 2 to 4.)Disassembly methodRemoving the handle (See Fig. 1.)1.2.3.4.5.Remove the eight screws A retaining the front cabinet and rear cabinet assemblies from

31、 the rear of the main body. (See Fig.2.)Open the cassette door. (See Fig.3.)Slide the lower part of the front cabinet assembly slightly in the direction of the arrow 1. (See Fig.3.)While removing the front cabinet assembly from the cassette knobs and remove it in the upward direction 2. (See Fig.3.)

32、Disconnect the speaker wire from the connector CN401 on the main board. (See Fig.4.)Open the CD door.Lift the handle slightly.While pressing the claws a of the rear cabinet assembly in the direction of the arrow 1, slide the handle in the direction of the arrow 2.1.2.3.CD doorRear cabinet assemblyHa

33、ndleClaw aClaw a112AAAARear cabinet assemblyCassette knobsRear cabinet assemblyFront cabinet assemblyRear cabinet assemblyFront cabinet assemblyMain boardCN401 21RC-BX301-6Fig.5Fig.6Fig.7Prior to performing the following procedures, remove the front cabinet assembly from the rear cabinet assembly.Re

34、moving the right and left speaker assemblies (See Fig. 5.)1.2.3.From the inside of the front cabinet assembly, remove the six screws B retaining the right and left speaker assemblies.Remove the solders from the soldered sections b of the right and left speaker assemblies, remove the speaker wires.Ta

35、ke out the right and left speaker assemblies.Removing the cassette door gear assembly (See Fig. 6.)1.2.From the inside of the front cabinet assembly, remove the two screws C retaining the cassette door gear assembly.Take out the cassette door gear assembly.NoteWhen attaching the screws C, apply a lo

36、cking agent to the screws C.NoteWhen attaching the screws B, apply a locking agent to the screws B.Removing the cassette door(See Fig. 7.)1.2.While pressing the section c of the cassette door in the direction of the arrow, remove the boss d of the cassette door from the section e of the front cabine

37、t assembly.Disengage the boss f of the cassette door from the section g of the front cabinet assembly.Prior to performing the following procedures, remove the cassette door gear assembly.NoteBe sure to hang the spring to the section h before attaching the cassette door to the front cabinet assembly.

38、BBBFront cabinet assemblyCassette door gear assemblyCassette door Section eSection cBoss d Boss fSection gSection hSpring Front cabinet assemblyRight speaker assemblyLeft speaker assemblySoldered section bSoldered section bCCBSpeaker wiresRC-BX301-7Fig.10Fig.11Fig.8Fig.9Removing the tuner board(See

39、Figs. 8 to 10.)1.2.3.4.5.From the rear side of the rear cabinet assembly, remove the screw D retaining the FM antenna.(See Fig.8.)Pull out the band and fine tune knobs from the tuner board. (See Fig.9.)Disconnect the wire from the connector CN101 on the tuner board. (See Fig.9.)Remove the screw E an

40、d two screws F retaining the tuner board. (See Fig.9.)Take out the tuner board, then remove the screw G retaining the antenna connector plate. (See Fig.10.)Prior to performing the following procedures, remove the front cabinet assembly from the rear cabinet assembly.NoteWhen attaching the screws G,

41、apply a locking agent to the screws G.Removing the main board(See Figs. 9 and 11.)1.2.3.4.5.Disconnect the wire from the connector CN101 on the tuner board. (See Fig.9.)Pull out the volume, DBB and function knobs from the main board. (See Fig.11.)Disconnect the wires from the connectors CN302, CN303

42、 and CN501 on the main board.(See Fig.11.)Remove the solders from the soldered section i connecting the wires to the main board.(See Fig.11.)Remove the three screws H retaining the main board. (See Fig.11.)DGHHFFRear cabinet assemblyRear cabinet assemblyRear cabinet assemblyRear cabinet assemblyMain

43、 boardVolume knobDBB knobCN302CN303CN501Function knobSoldered section iFM antennaTuner boardTuner boardAntenna connector plateFine tune knobBand knobCN101FM antenna wireFM antenna wireRC-BX301-8Fig.12Fig.13Fig.14Fig.15Removing the cassette deck/CD mechanism assembly(See Figs.12 and 13.)1.2.3.From th

44、e rear side of the rear cabinet assembly, remove the two screws J retaining the cassette deck/CD mechanism assembly. (See Fig.12.)Disconnect the wires from the connectors CN302, CN303 and CN501 on the main board.(See Fig.13.)Remove the two screws K retaining the cassette deck/CD mechanism assembly.

45、(See Fig.13.)NoteWhen attaching the screws K, apply a locking agent to the screws K.Removing the display board(See Figs.14 and 15.)1.2.3.4.5.From the bottom side of the CD mechanism assembly, remove the tie bands bundling the wires from the CD mechanism assembly. (See Fig.14.)Disconnect the wires fr

46、om the connectors BC01, BC02 and BC03 on the CD servo board.(See Fig.14.)Remove the solders from the soldered section j connecting the wires to the micro switch board.(See Fig.14.)Remove the two screws L retaining the display board. (See Fig.15.)Press the claws k in the direction of the arrow, remov

47、e the display board. (See Fig.15.)JCassette deck/CD mechanism assemblyRear cabinet assemblyRear cabinet assemblyBC01BC02BC03Tie bandsCD mechanism assemblyCassette desk mechanism assemblyTie bandDisplay boardClaws kCD servo boardSoldered section jMicro switchboardCN302CN303CN501Cassette deck/CD mecha

48、nism assemblyKLRC-BX301-9Fig.16Fig.17Removing the cassette board(See Fig. 16.)1.2.3.4.From the back side of the cassette deck mechanism assembly, remove the tie band bundling the wires.Remove the solders from the soldered section m connecting the wires of the capstan motor and leaf switch.Remove the

49、 four screws M retaining the cassette board.From the reverse side of the cassette board, remove the solders from the soldered section n connecting the wires of the REC/PB head.Removing the cassette deck mechanism assembly (See Fig. 17.)1.2.3.Remove the solders from the soldered section p connecting

50、the wires of the leaf switch.Remove the solders from the soldered section q connecting the wires of the REC/PB head.Remove the two screws N retaining the cassette deck mechanism assembly.Prior to performing the following procedures, remove the display board.NoteWhen attaching the screws N, apply a l