《JVC-RVDP200BK-cs-sm 维修电路原理图.pdf》由会员分享,可在线阅读,更多相关《JVC-RVDP200BK-cs-sm 维修电路原理图.pdf(70页珍藏版)》请在收音机爱好者资料库上搜索。
1、LVT0703-002A / RV-DP200BK (B) / EnglishCDTAPEAUXTUNERPRESETBANDMULTI CONTROLREWSTOPFFTUNINGONE TOUCHRECSTANDBYMID/TREBLESUPER WOOFERVOLUMEVOLUMEMIDTREBLE/OPENCLOCKDOWNUPSETTIMERTIMERON/OFFSLEEPPROGRAMRANDOMREPEATDISPLAYVOLUMESUPER WOOFERVOLUMERM-SRVDP100EREMOTE CONTROLAUXCDTAPEBANDFM MODETUNERAUTOPR
2、ESETREVERSE MODEREWMULTI CONTROLFFMID /TREBLEFor Customer Use:Enter below the Model No. and Serial No.which are located either on the rear, bot-tom or side of the cabinet. Retain thisinformation for future reference.Model No. Serial No. INSTRUCTIONSLVT0703-002ABPOWERED WOOFER CD SYSTEMRV-DP200BKRD-D
3、P200(B)-Cover.fm Page 1 Friday, February 2, 2001 1:27 PMRadioFans.CN 收音机爱 好者资料库G-1LVT0703-002A / RV-DP200BK (B) / EnglishWarnings, Cautions and OthersIMPORTANT for the U.K.DO NOT cut off the mains plug from this equipment. If the plug fit-ted is not suitable for the power points in your home or the
4、cable istoo short to reach a power point, then obtain an appropriate safetyapproved extension lead or consult your dealer.BE SURE to replace the fuse only with an identical approved type,as originally fitted.If nontheless the mains plug is cut off ensure to remove the fuseand dispose of the plug imm
5、ediately, to avoid a possible shock haz-ard by inadvertent connection to the mains supply.If this product is not supplied fitted with a mains plug then follow theinstructions given below:IMPORTANT:DO NOT make any connection to the terminal which is marked withthe letter E or by the safety earth symb
6、ol or coloured green orgreen-and-yellow.The wires in the mains lead on this product are coloured in accor-dance with the following code:Blue :NeutralBrown :LiveAs these colours may not correspond with the coloured markingsidentifying the terminals in your plug proceed as follows:The wire which is co
7、loured blue must be connected to the terminalwhich is marked with the letter N or coloured black.The wire which is coloured brown must be connected to the termi-nal which is marked with the letter L or coloured red.IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.Caution switch!Disconnect the mains plu
8、g to shut the power off completely. The switch in any position does not disconnect the mains line. The powercan be remote controlled.IMPORTANT FOR LASER PRODUCTSREPRODUCTION OF LABELS1CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE2WARNING LABEL, PLACED INSIDE THE UNIT1CLASS 1 LASER PRODUCT2CAUTION
9、: Invisible laser radiation when open and interlock failedor defeated. Avoid direct exposure to beam.3CAUTION: Do not open the top cover. There are no user service-able parts inside the Unit; leave all servicing to qualified servicepersonnel.CAUTIONTo reduce the risk of electrical shocks, fire, etc.
10、:1Do not remove screws, covers or cabinet.2Do not expose this appliance to rain or moisture.Caution: Proper VentilationTo avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:1Front:No obstructions and open spacing.2Sides/ Top/ Back:No obstructions should be
11、placed in the areas shown by the dimensions below.3Bottom:Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm ormore.CAUTION1. Do not block the ventilation openings or holes.(If the ventilation openings or holes are blocked by anewsp
12、aper or cloth, etc., the heat may not be ableto get out.)2. Do not place any naked flame sources, such aslighted candles, on the apparatus.3. When discarding batteries, environmental prob-lems must be considered and local rules or lawsgoverning the disposal of these batteries must befollowed strictl
13、y.4. Do not use this apparatus in a bathroom or placeswith water. Also do not place any containers filledwith water or liquids (such as cosmetics or medi-cines, flower vases, potted plants, cups, etc.) on topof this apparatus.CDTAPEAUXTUNERPRESETBANDMULTI CONTROLREWSTOPFFTUNINGONE TOUCHRECSTANDBYMID
14、/TREBLESUPER WOOFERVOLUMEVOLUMEMIDTREBLE/OPEN10 cm15 cm15 cm15 cmSTANDBY/ON10 cm15 cm15 cm15 cmFront viewSide viewRD-DP200(B)-Warning.fm Page 1 Friday, February 2, 2001 1:27 PMRadioFans.CN 收音机爱 好者资料库G-2LVT0703-002A / RV-DP200BK (B) / EnglishSAFETY INSTRUCTIONS“SOME DOS AND DONTS ON THE SAFE USE OF E
15、QUIPMENT”This equipment has been disigned and manufactured to meet international safety standards but, like any electrical equipment,care must be taken if you are to obtain the best results and safety is to be assured.)Do read the operating instructions before you attempt to use the equipment.Do ens
16、ure that all electrical connections (including the mains plug, extension leads and interconnections between pieces ofequipment) are properly made and in accordance with the manufacturers instructions. Switch off and withdraw the mains plugwhen making or changing connections.Do consult your dealer if
17、 you are ever in doubt about the installation, operation or safety of your equipment.Do be careful with glass panels or doors on equipment.)DONT continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any wayswitchoff, withdraw the mains plug and c
18、onsult your dealer.DONT remove any fixed cover as this may expose dangerous voltages.DONT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended opera-tion or has a standby mode.Switch off using the switch on the equipment and make sure
19、that your family know how to do this.Special arrangements may need to be made for infirm or handicapped people.DONT use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It isillegal to watch television whilst driving.DONT listen to head
20、phones at high volume as such use can permanently damage your hearing.DONT obstruct the ventilation of the equipment, for example with curtains or soft furnishings.Overheating will cause damage and shorten the life of the equipment.DONT use makeshift stands and NEVER fix legs with wood screws to ens
21、ure complete safety always fit the manufacturersapproved stand or legs with the fixings provided according to the instructions.DONT allow electrical equipment to be exposed to rain or moisture.ABOVE ALL NEVER let anyone, especially children, push anything into holes, slots or any other opening in th
22、e case -this could resultin a fatal electrical shock.; NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry!RD-DP200(B)-Warning.fm Page 2 Friday, February 2, 2001 1:27 PM1LVT0703-002A / RV-DP200BK (B) / EnglishThank you for purchasing the JVC Powered W
23、oofer CD System.We hope it will be a valued addition to your home as well as your outdoor life, giving you years of enjoyment.Be sure to read this instruction manual carefully before operating your new stereo system.In it you will find all the information you need to set up and use the system.If you
24、 have a query that is not answered by the manual, please contact your dealer. Here are some of the things that make your System both powerful and simple to use.IThe controls and operations have been redesigned to make them very easy to use, freeing you to just enjoy the music.With JVCs COMPU PLAY yo
25、u can turn on the System and automatically start the Radio, CD Player, or Casette Deck with a single touch. (Only when AC power is used.)IThe System is equipped with 16-cm dia. super woofers that provide powerful bass.IA 45-station preset capability (30 FM and 15 AM (MW/LW) in addition to auto-seek
26、and manual tuning.ICD options include CD pitch control function, repeat, random and program play.IAuto-reverse tape functionIRhythm Machine provides various rhythm patterns, scratch sounds, and drum pad patterns.ITimer functions; set the system to automatically come on, switch off. Basic information
27、 that is the same for many different functions - e.g. setting the volume - is given in the section Basic Operations, and not repeated under each function.The names of buttons/controls and display messages are written in all capital letters: e.g. TUNER BAND, NO DISC.System functions are written with
28、an initial capital letter only: e.g. Normal Play.Use the table of contents to look up specific information you require.Weve enjoyed making this manual for you, and hope it serves you in enjoying the many features built into your System. I1.Where to place the SystemSelect a place which is level, dry
29、and neither too hot nor too cold. (Between 0C and 40C.)Leave sufficient distance between the System and a TV.Do not use the System in a place subject to vibrations.I2.Power cordDo not handle the power cord with wet hands!Some power is always consumed as long as the power cord is connected to the wal
30、l outlet.When unplugging the System from the wall outlet, always pull the plug, not the power cord.I3.When carrying the SystemRemove a CD from the System.Disconnect all the cords from the System.I4.Malfunctions, etc.There are no user serviceable parts inside. In case of system failure, unplug the po
31、wer cord and consult your dealer.Do not insert any metallic object into the System.I ITable of ContentsFeatures.1How This Manual Is Organized.1IMPORTANT CAUTIONS.1Getting Started.2Basic Operations.6Using the Tuner.8Using the CD Player.10Using the Cassette Deck.13Using the Cassette Deck.14Using the R
32、hythm Machine. 16Listening to an Auxiliary Equipment. 21Using the Microphone/Guitar. 22Using the Timers. 23Care And Maintenance . 25Troubleshooting. 26Specifications. 27FeaturesHow This Manual Is OrganizedIMPORTANT CAUTIONSRV-DP200(B)-Eng.fm Page 1 Friday, February 2, 2001 2:58 PM2LVT0703-002A / RV-
33、DP200BK (B) / EnglishI IGetting StartedCheck that you have all of the following items, which are supplied with the System.Power Cord (1)Remote Control (1)Batteries (2)Shoulder Strap (1)If any of these items are missing, contact your dealer immediately. To carry the System, attach the supplied should
34、er strap to each end of the System.Press in the metal fitting of the shoulder strap and hook it over the shaft at each end of the System as shown in the figure.To detach the shoulder strap, press in the metal fitting and unhook it from the shaft.The shoulder strap is adjustable in length and has the
35、 remote control case. Match the polarity (+ and ) on the batteries with the + and markings in the battery compartment.CAUTION: Handle batteries properly.To avoid battery leakage or explosion:Remove batteries when the Remote Control will not be used for a long time.When you need to replace the batter
36、ies, replace both batteries at the same time with new ones.Dont use an old battery with a new one.Dont use different types of batteries together. AccessoriesHow To Carry the SystemHow To Put Batteries In the Remote Control CLOCKDOWNUPSETTIMERTIMERON/OFFSLEEPPROGRAMRANDOMREPEATDISPLAYVOLUMESUPER WOOF
37、ERVOLUMERM-SRVDP100REMOTE CONTROLAUXCDTAPEBANDFM MODETUNERAUTOPRESETREVERSE MODEREWMULTI CONTROLFFMID /TREBLEShoulder strapRemote control caseRemote control unitShoulder strap1122R6P(SUM-3)/AA(15F)RD-DP200(B)-Eng.fm Page 2 Friday, February 2, 2001 1:27 PM3LVT0703-002A / RV-DP200BK (B) / EnglishThe R
38、emote Control makes it easy to use many of the functions of the System from a distance of up to 7m (23 feet) away. You need to point the Remote Control at the remote sensor on the Systems front panel.Note: If you point the Remote Control from the slant direction, the above distance will be shortened
39、.CAUTION: Make all connections before plugging the System into an AC power outlet.Connect a signal cord (not supplied) between the AUX IN terminal on the System and the output terminals of your auxiliary equipment (e.g.turntable or MD player). You can listen to this source. Firmly insert the supplie
40、d AC power cord into the AC inlet on the back of the System.CAUTIONS:ONLY USE THE JVC POWER CORD PROVIDED WITH THIS SYSTEM TO AVOID MALFUNCTION OR DAM-AGE TO THE SYSTEM.BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN THE SYS-TEM IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.No
41、w you can plug the AC power cord into the wall outlet, and your System is at your command!Using the Remote ControlConnecting Auxiliary Equipment Connecting the AC Power CordCDTAPEAUXTUNERPRESETBANDMULTI CONTROLREWSTOPFFTUNINGONE TOUCHRECSTANDBYMID/TREBLESUPER WOOFERVOLUMEVOLUMEMIDTREBLE/OPENRemote s
42、ensor12VDC INAC IN AUX INPHONESPin-plug x 2Stereo mini plugSignal cord(not supplied)Turntable (with built-in equalizer) or MD player (not supplied) AC IN Power cordRD-DP200(B)-Eng.fm Page 3 Friday, February 2, 2001 1:27 PM4LVT0703-002A / RV-DP200BK (B) / EnglishIt is recommended that memory backup b
43、atteries are loaded in the System to prevent the contents of the memory from being erased when apower failure occurs.I1.Open the battery cover on the back of the System by pulling it toward you while pressing the tabs as shown by the arrows.I2.Load three batteries (not supplied) in the battery compa
44、rtment in the order of 1 to 3.Be careful to put the batteries with the + and terminals positioned correctly.I3.Securely close the battery cover.To remove the batteries, remove the battery 3 first.Notes:The memory backup batteries will not be consumed as long as the power is supplied from an AC outle
45、t, loaded 10 batteries, or car battery (DC12V). However, if no power is supplied to the System, the memory backup batteries should be replaced with new ones approximately every 12 months to securely maintain the contents of the memory. Before replacing the memory backup batteries, always connect the
46、 AC power cord to the System to prevent the contents of memory from being erased.When a power failure occurs, the time indication disappears from the display to save the battery power of the memory backup batteries.CAUTION: Handle batteries properly.To avoid battery leakage or explosion:When you nee
47、d to replace the batteries, replace all batteries at the same time with new ones. Before replacing, you need to supply AC power to the System.Dont use an old battery with new ones.Dont use different types of batteries together. You can operate the System on 10 batteries. I1 Open the battery cover on
48、 the back of the System by pulling it toward you while pressing the tabs as shown by the arrows.I2.Put 10 batteries (not supplied) in the battery compartment in the order of 1 to 10 as shown.Be careful to put the batteries with the + and - terminals positioned correctly.I3.Securely close the battery
49、 cover.To remove the batteries, remove the battery 10 first.Notes:When you operate the System on mains (AC) power or on car battery (DC12V), the power source automatically switches from batteries to AC or DC12V. However, you should remove the 10 batteries when operating on AC power or car battery (D
50、C12V).When the batteries are exhausted, mistracking will occur during CD playback or sound will be distorted intermittently during tape playback. You need to replace the batteries at a time.It is recommended that the AC power cord be used when recording important material or listening to a CD.Memory