《索尼 MZ_RH10_sm 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《索尼 MZ_RH10_sm 电路图 维修手册.pdf（60页珍藏版）》请在收音机爱好者资料库上搜索。
1、SERVICE MANUAL PORTABLE MD RECORDER MZ-RH10 Ver. 1.0 2005.03 9-879-560-01 2005C05-1 2005.03 Sony Corporation Personal Audio Group Published by Sony Engineering Corporation Model Name Using Similar Mechanism NEW MD Mechanism Type MT-MZNH900-181J Optical Pick-up Name ABX-UJ US Model Canadian Model AEP
2、 Model UK Model E Model Australian Model Tourist Model SPECIFICATIONS Continued on next page US and foreign patents licensed from Dolby Laboratories. SonicStage is trademark or registered trademark of Sony Corporation. MD Simple Burner, OpenMG, “MagicGate”, “MagicGate Memory Stick”, “Memory Stick”,
3、Hi-MD, Net MD, ATRAC, ATRAC3, ATRAC3plus and their logos are trademarks of Sony Corporation. Microsoft, Windows, Windows NT and Windows Media are trademarks or registered trademarks of Microsoft Corporation in the United States and /or other countries. IBM and PC/AT are registered trademarks of Inte
4、rnational Business Machines Corporation. Macintosh is a trademark of Apple Computer, Inc. in the United States and/ or other countries. P entium is a trademark or registered trademark of Intel Corporation. All other trademarks and registered trademarks are trademarks or registered trademarks of thei
5、r respective holders. and marks are omitted in this manual. CD and music-related data from Gracenote, Inc., copyright 2000- 2004 Gracenote. Gracenote CDDB Client Software, copyright 2000- 2004 Gracenote. This product and service may practice one or more of the following U.S. Patents: #5,987,525; #6,
6、061,680; #6,154,773, #6,161,132, #6,230,192, #6,230,207, #6,240,459, #6,330,593, and other patents issued or pending. Services supplied and/or device manufactured under license for following Open Globe, Inc. United States Patent 6,304,523. Gracenote is a registered trademarks of Gracenote. The Grace
7、note logo and logotype, and the “Powered by Gracenote” logo are trademarks of Gracenote. Program 2001, 2002, 2003, 2004, 2005 Sony Corporation Documentation 2005 Sony Corporation Audio playing system MiniDisc digital audio system Laser diode properties Material: GaAlAs Wavelength: = 790 nm Emission
8、duration: continuous Laser output: less than 44.6 W (This output is the value measured at a distance of 200 mm from the lens surface on the optical pick-up block with 7 mm aperture.)MZ-RH10 2 Revolutions 350 rpm to 3,000 rpm (CLV) Error correction Hi-MD: LDC (Long Distance Code)/BIS (Burst Indicator
9、 Subcode) MD: ACIRC (Advanced Cross Interleave Reed Solomon Code) Sampling frequency 44.1 kHz Sampling rate converter Optical (digital) input: 32 kHz/44.1 kHz/ 48 kHz Audio formats supported by this recorder Recording: Linear PCM (44.1 kHz/16 bit) AT R AC3plus (Adaptive TRansform Acoustic Coding 3 p
10、lus) (Hi-SP/Hi-LP) Playback: Linear PCM AT R AC3plus AT R AC3 AT R A C MP3 (MPEG-1 Audio Layer-3/Sampling frequency 44.1 kHz/Bit rate 32 - 320 kbps (constant/variable bit rate) Modulation system Hi-MD: 1-7RLL (Run Length Limited)/PRML (Partial Response Maximum Likelihood) MD: EFM (Eight to Fourteen
11、Modulation) Frequency response 20 to 20,000 Hz 3 dB Outputs i: stereo mini-jack (dedicated remote control jack) Maximum output (DC) Headphones: 2.8 mW + 2.8 mW (16 ) (European models) 5 mW + 5 mW (16 ) (Other models) Power requirements Sony AC Power Adaptor connected at the DC IN 3V jack: 120 V AC,
12、60 Hz (Models for USA, Canada, Mexico and Taiwan) 240 V AC, 50 Hz (Model for Australia) 220 V AC, 50 Hz (Models for China and Argentine) 100 - 240 V AC, 50/60 Hz (Other models) The recorder: Nickel metal hydride rechargeable battery NH-14WM 1.2V 1,350 mAh (MIN) Ni-MH LR6 (size AA) alkaline battery A
13、C power adaptor DC 3V Operating temperature +5C (+41F) to +35C (+95F) Battery operation time 2) Measured in accordance with JEITA. 2) When playing continuously in Hi-MD mode (Unit: approx.hours)(JEITA) When playing continuously in MD mode (Unit: approx.hours)(JEITA) Battery life 1) When recording co
14、ntinuously in Hi-MD mode (Unit: approx.hours)(JEITA 2) ) Disc type Batteries Linear PCM Hi-SP Hi-LP 1GB Hi-MD disc NH-14WM 3) 5.5 7.5 8.5 LR6 4) 233 NH-14WM + LR68 1 1 . 5 12.5 60/74/80-minute standard disc NH-14WM 5 7.5 8.5 LR6 4 6 6.5 NH-14WM + LR69 . 5 1 4 .5 16.5 1) Measured with “EL Light” is s
15、et to “Auto Off” (page 58). 2) Measured in accordance with the JEITA (Japan Electronics and Information Technology Industries Association) standard. 3) When using a 100% fully charged nickel metal hydride rechargeable battery 4) When using a Sony LR6 (size AA) alkaline dry battery (produced in Japan
16、) Disc type Batteries Linear PCM Hi-SP Hi-LP MP3 1) 1) Tracks transferred at 128 kbps 1GB Hi-MD disc NH-14WM 9 12.5 14.5 13 LR6 9.5 13.5 15.5 14.5 NH-14WM + LR6 20 28.5 33 30 60/74/80-minute standard disc NH-14WM 7.5 12 15 13.5 LR6 8 13 16 14.5 NH-14WM + LR6 17 27.5 34 30.5 Disc type Batteries SP LP
17、2 LP4 60/74/80-minute standard disc NH-14WM 13.5 15 15.5 LR6 16 17.51 8 . 5 NH-14WM + LR6 32 35.5 37 Dimensions Approx. 80.2 18.9 84.1 mm (w/h/d) (3 1 /4 3 /4 3 3 /8 in.) (excluding projecting parts and controls) Mass Approx. 120 g (4.2 oz) (the recorder only) Approx. 147 g (5.2 oz) (including the r
18、echargeable battery) Supplied accessories Optical cable (except US and Canadian models) Clamp filters (small-size) CD-ROM (SonicStage/MD Simple Burner) Carrying pouch *D o n o t play a CD-ROM on an audio CD player. AC power adaptor Dedicated USB cable NH-14WM Nickel metal hydride rechargeable batter
19、y Remote control Earphones Battery carrying case Dry battery case Design and specifications are subject to change without notice. List of the recording time for each disc When using a disc in Hi-MD mode When recording on the recorder Recording time 1) 1) Approximate time Recording mode on the record
20、er Codec/ Bit rate 1GB Hi-MD disc 80-minute standard disc 74-minute standard disc 60-minute standard disc PCM Linear PCM/ 1.4Mbps 1 hour and 34 minutes 28 minutes 26 minutes 21 minutes Hi-SP ATRAC3plus/ 256kbps 7 hours and 55 minutes 2 hours and 20 minutes 2 hours and 10 minutes 1 hour and 40 minute
21、s Hi-LP ATRAC3plus/ 64kbps 34 hours 10 hours and 10 minutes 9 hours and 20 minutes 7 hours and 40 minutes When transferring from the computer Recording time 1)2) 2) When transferring 4-minute tracks Codec/Bit rate 1GB Hi-MD disc 80-minute standard disc 74-minute standard disc 60-minute standard disc
22、 Linear PCM/1.4Mbps 1 hour and 34 minutes 28 minutes 26 minutes 21 minutes ATRAC3plus/256kbps 7 hours and 55 minutes 2 hours and 20 minutes 2 hours and 10 minutes 1 hour and 40 minutes ATRAC3plus/64kbps 34 hours 10 hours and 10 minutes 9 hours and 20 minutes 7 hours and 40 minutes ATRAC3plus/ 48 kbp
23、s 45 hours 13 hours and 30 minutes 12 hours and 30 minutes 10 hours ATRAC3/132kbps 16 hours and 30 minutes 4 hours and 50 minutes 4 hours and 30 minutes 3 hours and 40 minutes ATRAC3/105kbps 20 hours and 40 minutes 6 hours and 10 minutes 5 hours and 40 minutes 4 hours and 40 minutes ATRAC3/66kbps 32
24、 hours and 40 minutes 9 hours and 50 minutes 9 hours 7 hours and 20 minutes MP3/128kbps 17 hours 5 hours 4 hours and 30 minutes 3 hours and 30 minutes When using a disc in MD mode You cannot record in MD mode on this recorder. When transferring from the computer Recording time 1)2) 1) Approximate ti
25、me 2) When transferring 4-minute tracks Codec/Bit rate 80-minute standard disc 74-minute standard disc 60-minute standard disc AT R AC(stereo)/292kbps 80 minutes 74 minutes 60 minutes ATRAC3/132, 105kbps 2 hours and 40 minutes 2 hours and 28 minutes 2 hours ATRAC3/66kbps 5 hours and 20 minutes 4 hou
26、rs and 56 minutes 4 hours Recording and playback time Inputs 1) MIC: stereo mini-jack (minimum input level 0.13 mV) Line in: stereo mini-jack for analog input (minimum input level 49 mV) optical (digital) mini-jack for optical (digital) input 1) The LINE IN (OPT) jack is used to connect either a dig
27、ital (optical) cable or a line (analog) cable.MZ-RH10 3 TABLE OF CONTENTS 1. SERVICING NOTES . 4 2. GENERAL . 5 3. DISASSEMBLY 3-1. Disassembly Flow . 6 3-2. Case (Lower) Block . 6 3-3. Main Board . 7 3-4. Panel (Upper) Section . 7 3-5. Mechanism Deck (MT-MZNH900-181J) . 8 3-6. Battery Case Block .
28、8 3-7. Gear (BSA), Gear (SB) . 9 3-8. OP Service Assy . 9 3-9. DC Motor SSM18D/C-NP (Spindle) (M701), DC Motor (Sled) (M702), DC Motor Unit (Over Write Head Up/Down) (M703) . 10 3-10. Holder Assy . 10 3-11. Position of Ferrite Core . 11 4. TEST MODE . 12 5. ELECTRICAL ADJUSTMENTS . 16 6. DIAGRAMS 6-
29、1. Block Diagram MD SERVO Section . 21 6-2. Block Diagram AUDIO Section . 22 6-3. Block Diagram POWER SUPPLY Section . 23 6-4. Schematic Diagram MAIN Board (1/9) . 25 6-5. Schematic Diagram MAIN Board (2/9) . 26 6-6. Schematic Diagram MAIN Board (3/9) . 27 6-7. Schematic Diagram MAIN Board (4/9) . 2
30、8 6-8. Schematic Diagram MAIN Board (5/9) . 29 6-9. Schematic Diagram MAIN Board (6/9) . 30 6-10. Schematic Diagram MAIN Board (7/9) . 31 6-11. Schematic Diagram MAIN Board (8/9) . 32 6-12. Schematic Diagram MAIN Board (9/9) . 33 6-13. Printed Wiring Board MAIN Board (Component Side) . 34 6-14. Prin
31、ted Wiring Board MAIN Board (Conductor Side) . 35 7. EXPLODED VIEWS 7-1. Case (Lower) Section . 48 7-2. Panel (Upper) Section . 49 7-3. Chassis Section . 50 7-4. Mechanism Deck Section (MT-MZNH900-181J) . 51 8. ELECTRICAL PARTS LIST . 52 Notes on chip component replacement Never reuse a disconnected
32、 chip component. Notice that the minus side of a tantalum capacitor may be damaged by heat. Flexible Circuit Board Repairing Keep the temperature of the soldering iron around 270 C during repairing. Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). Be caref
33、ul not to apply force on the conductor when soldering or unsoldering. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. SAFETY-RELATED COMPONENT WARNING! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WIT
34、H MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. For use in your house: Use the AC power adaptor supplied with this recorder. Do not
35、 use any other AC power adaptor since it may cause the recorder to malfunction. Polarity of the plug On power sources ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT! LES COMPOSANTS IDENTIFIS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHMATIQUES ET LA LISTE DES PICES SONT CRITIQUES POUR LA SCURIT DE FONCTI
36、ONNEMENT. NE REMPLACER CES COM- POSANTS QUE PAR DES PICES SONY DONT LES NUMROS SONT DONNS DANS CE MANUEL OU DANS LES SUPPLMENTS PUBLIS PAR SONY.4 MZ-RH10 SECTION 1 SERVICING NOTES The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference gen
37、erated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. NOTES
38、ON LASER DIODE EMISSION CHECK The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pick- up block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens. NOTES ON HA
39、NDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT OPERATION CHECK WHEN THE MAIN BOARD IS REMOVED In making an operation check with the MAIN board removed from the set, short the SL894 of the MAIN board with the solder before starting the operation check. Note: Be sure to remove the solder used for short
40、circuit after the repaire completed. MAIN BOARD (Conductor Side) SL894 UNLEADED SOLDER Boards requiring use of unleaded solder are printed with the lead- free mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to t
41、heir particular size) : LEAD FREE MARK Unleaded solder has the following characteristics. Unleaded solder melts at a temperature about 40 C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering i
42、rons using a temperature regulator should be set to about 350 C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! Strong viscosity Unleaded solder is more viscou-s (sticky, less prone to flow) than ordinary solder so use caution not t
43、o let solder bridges occur such as on IC pins, etc. Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. Providing the required system environment The following system environment is required in order to use the SonicStage Ver.
44、3.0/MD Simple Burner Ver. 2.0 software for the MD Walkman. This software is not supported by the following environments: OSs other than the indicated above Personally constructed PCs or operating systems An environment that is an upgrade of the original manufacturer-installed operating system Multi-boot environment Multi-monitor environment Macintosh We do not ensure trouble-free operation on all computers that satisfy the system requirements. The NTFS format o
免费区 
