Sony-STRDE697-rec-sm 维修电路原理图.pdf

《Sony-STRDE697-rec-sm 维修电路原理图.pdf》由会员分享，可在线阅读，更多相关《Sony-STRDE697-rec-sm 维修电路原理图.pdf（64页珍藏版）》请在收音机爱好者资料库上搜索。

1、1SERVICE MANUALUS ModelCanadian ModelAEP ModelUK ModelE ModelAustralian ModelSTR-DE697FM STEREO/FM-AM RECEIVERAUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONICDISTORTION:(Models of area code US only)With 8 ohm loads, both channels driven, from20 20,000 Hz; rated 90 watts per channelminimum R

2、MS power, with no more than0.09 % total harmonic distortion from 250milliwatts to rated output.Amplifier sectionPower OutputModels of area code US, CNDRated Power Output at Stereo Mode(8 ohms 20 Hz 20 kHz, THD 0.09 %)90 W + 90 W 1)Reference Power Output 1)(8 ohms 20 Hz 20 kHz, THD 0.09 %)FRONT 2) :

3、90 W/chCENTER 2) : 90 WSURR 2) : 90 W/chSURR BACK 2) : 90 W/ch(8 ohms 1 kHz, THD 0.7 %)FRONT 2) : 100 W/chCENTER 2) : 100 WSURR 2) : 100 W/chSURR BACK 2) : 100 W/chSPECIFICATIONSModels of area code AEP, UKRated Power Output at Stereo Mode(8 ohms 1 kHz, THD 0.7 %)100 W + 100 W 1)Reference Power Outpu

4、t 1)(8 ohms 1 kHz, THD 0.7 %)FRONT 2) : 100 W/chCENTER 2) : 100 WSURR 2) : 100 W/chSURR BACK 2) : 100 W/chModels of area code SP, MYRated Power Output at Stereo Mode(8 ohms 1 kHz, THD 0.7 %)100 W + 100 W 1)Reference Power Output 1)(8 ohms 1 kHz, THD 10 %)FRONT 2) : 120 W/chCENTER 2) : 120 WSURR 2) :

5、 120 W/chSURR BACK 2) : 120 W/chVer 1.0 2004. 049-877-763-012004D04-1 2004. 04Sony CorporationHome Audio CompanyPublished by Sony Engineering CorporationManufactured under license from Dolby Laboratories.“Dolby”, “Pro Logic” and the double-D symbol aretrademarks of Dolby Laboratories.“DTS”, “DTS-ES”

6、, “Neo:6” and “DTS 96/24” aretrademarks of Digital Theater Systems, Inc. Continued on next page Photo: Black typeRadioFans.CN 收音机爱 好者资料库2STR-DE697Models of area code AUSRated Power Output at Stereo Mode(8 ohms 20 Hz 20 kHz, THD 0.09 %)80 W + 80 W 1)(8 ohms 1 kHz, THD 0.7 %)100 W + 100 W 1)Reference

7、Power Output 1)(8 ohms 20 Hz 20 kHz, THD 0.09 %)FRONT 2) : 80 W/chCENTER 2) : 80 WSURR 2) : 80 W/chSURR BACK 2) : 80 W/ch(8 ohms 1 kHz, THD 0.7 %)FRONT 2) : 100 W/chCENTER 2) : 100 WSURR 2) : 100 W/chSURR BACK 2) : 100 W/ch(8 ohms 1 kHz, THD 10 %)FRONT 2) : 120 W/chCENTER 2) : 120 WSURR 2) : 120 W/c

8、hSURR BACK 2) : 120 W/ch1) Measured under the following conditions:Area codePower requirementsUS, CND120 V AC, 60 HzAEP, UK, SP, MY230 V AC, 50 HzAUS240 V AC, 50 Hz2) Depending on the sound field settings and thesource, there may be no sound output.Frequency responseMULTI CH IN, SA-CD/10 Hz 70 kHzCD

9、, MD/TAPE, DVD,+0.5/2 dB (with soundAUX, VIDEO 1, 2, 3field and equalizerbypassed)Inputs (Analog)MULTI CH IN, SA-CD/Sensitivity: 500 mVCD, MD/TAPE, DVD,Impedance: 50 kiloohmsAUX, VIDEO 1, 2, 3S/N 3) : 96 dB(A, 500 mV 4) )3) INPUT SHORT (with sound field and equalizerbypassed).4) Weighted network, in

10、put level.Inputs (Digital)DVD, SA-CD/CDSensitivity: (Coaxial)Impedance: 75 ohmsS/N: 100 dB(A, 20 kHz LPF)VIDEO 2, MD/TAPE,Sensitivity: SA-CD/CD (Optical)Impedance: S/N: 100 dB(A, 20 kHz LPF)Outputs (Analog)MD/TAPE (OUT),Voltage: 500 mVVIDEO 1 (AUDIO OUT)Impedance: 10 kiloohmsSUB WOOFERVoltage: 2 VIm

11、pedance: 1 kiloohmsOutputs (Digital)MD/TAPE (Optical)Sensitivity: EQGain levels6 dB, 1 dB stepFM tuner sectionTuning range87.5 108.0 MHzAntennaFM wire antennaAntenna terminals75 ohms, unbalancedIntermediate frequency10.7 MHzSensitivityMono:18.3 dBf, 2.2 V/75 ohmsStereo:38.3 dBf, 22.5 V/75 ohmsUseabl

12、e sensitivity11.2 dBf, 1 V/75 ohmsS/NMono:76 dBStereo:70 dBHarmonic distortion at 1 kHzMono:0.3%Stereo:0.5%Separation45 dB at 1 kHzFrequency response30 Hz 15 kHz,+0.5/2 dBSelectivity60 dB at 400 kHzAM tuner sectionTuning rangeModels of area code US, CNDWith 10-kHz tuning scale: 530 1,710 kHz 5)With

13、9-kHz tuning scale:531 1,710 kHz 5)Models of area code AEP, UK, AUS, SP, MYWith 9-kHz tuning scale:531 1,602 kHzAntennaLoop antennaIntermediate frequency450 kHzUsable sensitivity50 dB/m (at 1,000 kHz or999 kHz)S/N54 dB (at 50 mV/m)Harmonic distortion0.5 % (50 mV/m, 400 Hz)SelectivityAt 9 kHz:35 dBAt

14、 10 kHz:40 dB5) You can change the AM tuning scale to 9 kHz or 10 kHz.After tuning in any AM station, turn off the receiver. Whileholding down PRESET TUNING + or TUNING +, press?/1. All preset stations will be erased when you changethe tuning scale. To reset the scale to 10 kHz (or 9 kHz),repeat the

15、 procedure.RadioFans.CN 收音机爱 好者资料库3STR-DE697Video sectionInputs/OutputsVideo:1 Vp-p, 75 ohmsS-video:Y: 1 Vp-p, 75 ohmsC: 0.286 Vp-p, 75 ohmsCOMPONENT VIDEO:(Except for models of area code AEP, UK)Y: 1 Vp-p, 75 ohmsPB/CB/B-Y: 0.7 Vp-p,75 ohmsPR/CR/R-Y: 0.7 Vp-p,75 ohms80 MHz HD Pass ThroughGeneralPow

16、er requirementsArea codePower requirementsUS, CND120 V AC, 60 HzAEP, UK230 V AC, 50/60 HzAUS240 V AC, 50 HzSP, MY220 230 V AC, 50/60 HzPower consumptionArea codePower consumptionUS250 WCND340 VAAEP, UK, AUS, SP, MY265 WPower consumption (during standby mode)0.3 W (when “P.SAVE.” in theCUSTOMIZE menu

17、 is set to“ON”)AC outletsArea codeAC outletsUS, CND1 switched, 120 W/1A MAXAEP, UK, AUS, SP, MY1 switched, 100 W MAXDimensions (w/h/d) (Approx.)430 157.5 312 mm(16 7/8 6 2/8 12 2/8inches) includingprojecting parts andcontrolsMass (Approx.)8.5 kg (18 lb 12 oz)Supplied accessoriesFM wire antenna (1)AM

18、 loop antenna (1)Remote commander RM-PP413 (1)R6 (size-AA) batteries (2)Design and specifications are subject to changewithout notice. AbbreviationCND : Canadian modelAUS : Australian modelSP: Singapore modelMY: Malaysia modelSAFETY-RELATED COMPONENT WARNING!COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED

19、 LINEWITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND INTHE PARTS LIST ARE CRITICAL TO SAFE OPERATION.REPLACE THESE COMPONENTS WITH SONY PARTS WHOSEPART NUMBERS APPEAR AS SHOWN IN THIS MANUAL ORIN SUPPLEMENTS PUBLISHED BY SONY.ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT!LES COMPOSANTS IDENTIFIS PAR UNE

20、MARQUE 0 SUR LESDIAGRAMMES SCHMATIQUES ET LA LISTE DES PICESSONT CRITIQUES POUR LA SCURIT DE FONCTIONNEMENT.NE REMPLACER CES COMPOSANTS QUE PAR DES PICESSONY DONT LES NUMROS SONT DONNS DANS CE MANUELOU DANS LES SUPPLMENTS PUBLIS PAR SONY.1.5 k0.15 FACvoltmeter(0.75 V)To Exposed MetalParts on SetEart

21、h GroundSAFETY CHECK-OUT (US MODEL)After correcting the original service problem, perform the follow-ing safety check before releasing the set to the customer:Check the antenna terminals, metal trim, “metallized” knobs, screws,and all other exposed metal parts for AC leakage.Check leakage as describ

22、ed below.LEAKAGE TESTThe AC leakage from any exposed metal part to earth ground andfrom all exposed metal parts to any exposed metal part having areturn to chassis, must not exceed 0.5 mA (500 microampers.).Leakage current can be measured by any one of three methods.1.A commercial leakage tester, su

23、ch as the Simpson 229 or RCAWT-540A. Follow the manufacturers instructions to use theseinstruments.2.A battery-operated AC milliammeter. The Data Precision 245digital multimeter is suitable for this job.3.Measuring the voltage drop across a resistor by means of aVOM or battery-operated AC voltmeter.

24、 The “limit” indica-tion is 0.75 V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are ex-amples of a passive VOM that is suitable. Nearly all batteryoperated digital multimeters that have a 2 V AC range are suit-able. (See Fig. A)Fig. A. Using an AC vol

25、tmeter to check AC leakage.4STR-DE697TABLE OF CONTENTS1. GENERALMain unit . 5Remote button description.62. DISASSEMBLY2-1. Case . 72-2. Front Panel Section . 82-3. Back Panel Section.82-4. Digital Board.92-5. Standby Board. 92-6. Main Board . 102-7. Surr Back Board . 103. TEST MODE. 114. DIAGRAMS4-1

26、. IC Pin Descriptions . 124-2. Circuit Boards Location . 154-3. Block Diagram Tuner/Audio Section . 164-4. Block Diagram Digital Section . 174-5. Block Diagram Video Section . 184-6. Block Diagram Key/Display Section . 194-7. Block Diagram Power Section . 204-8. Printed Wiring Boards Main Section .

27、224-9. Schematic Diagram Main Section (1/2) . 234-10. Schematic Diagram Main Section (2/2) . 244-11. Printed Wiring Board Digital Section (1/2) . 254-12. Printed Wiring Board Digital Section (2/2) . 264-13. Schematic Diagram Digital Section (1/3) . 274-14. Schematic Diagram Digital Section (2/3) . 2

28、84-15. Schematic Diagram Digital Section (3/3) . 294-16. Printed Wiring Boards Center/Surround Back Speaker Section . 304-17. Schematic Diagram Center/Surround Back Speaker Section . 314-18. Printed Wiring Board Video Section . 324-19. Schematic Diagram Video Section . 334-20. Printed Wiring Board S

29、-video Section . 344-21. Schematic Diagram S-video Section . 344-22. Printed Wiring Boards Display Section . 354-23. Schematic Diagram Display Section . 364-24. Printed Wiring Boards Power Section . 374-25. Schematic Diagram Power Section . 384-26. IC Block Diagrams. 395. EXPLODED VIEWS5-1. Case Sec

30、tion . 425-2. Front Panel Section . 435-3. Back Panel Section. 445-4. Chassis Section . 456. ELECTRICAL PARTS LIST. 46MODEL IDENTIFICATION BACK PANEL Part No.MODELPART No.US4-252-501-0sCND4-252-501-1sAEP4-252-501-2sUK4-252-501-3sSP, MY4-252-501-4sAUS4-252-501-5s AbbreviationCND: Canadian modelAUS :

31、Australian modelSP: Singapore modelMY : Malaysia model5STR-DE697SECTION 1GENERALThis section is extractedfrom instruction manual.6STR-DE6977STR-DE697Note : This set can be disassemble according to the following sequence.SECTION 2DISASSEMBLY2-1. CASE2-1.CASE(Page 7)2-2.FRONT PANEL SECTION(Page 8)2-3.

32、BACK PANEL SECTION(Page 8)SET2-5.STANDBY BOARD(Page 9)2-7.SURR BACK BOARD(Page 10)2-4.DIGITAL BOARD(Page 9)2-6.MAIN BOARD(Page 10)Note : Follow the disassembly procedure in the numerical order given.1 two screws(case 3 TP2)2 three screws(case 3 TP2)3 two screws(case 3 TP2)4 case8STR-DE6972-2. FRONT

33、PANEL SECTION2-3. BACK PANEL SECTION8 front panel section3 CNS5052 CNP7917 CN2011 clip5 four screws(+BVTP 3 x 8)4 two screws(+BVTP 3 x 8)6 two screws(+BVTP 3 x 8)1 CNS2013 CNP2034 CNP2022 connector7 CNP5016 CNP502qa CNP9019 CN9080 CN9068 CNP9135 CNP503qd screw(+BVTP 3 x 8)qh six screws(+BVTP 3 x 8)q

34、f two screws(+BVTP 3 x 8)qk back panel sectionqj five screws(+BVTP 3 x 8)qs three screws(+BVTP 3 x 8)qg three screws(+BVTP 3 x 8)9STR-DE6972-4. DIGITAL BOARD7 CNP50156 CNP5001 CNP5062 CNP5103 CNP5079 bracket (digital)0 DIGITAL board4 screw(+BVTP 3 x 8)8 screw(+BVTP 3 x 8)6 STANDBY board1 CNP9154 CNP

35、9032 CNP8043 CNP9025 three screws (+BV SUMITITE (B3)2-5. STANDBY BOARD10STR-DE6975 screw(+BV SUMITITE (B3)3 two screws(+BV SUMITITE (B3)4 two screws(+BV SUMITITE (B3)6 two screws(+BV SUMITITE (B3)7 MAIN board1 CNP9152 CNP8022-6. MAIN BOARD2-7. SURR BACK BOARD3 three screws(transistor)4 three screws(

36、transistor)8 SURR BACK board1 CNP5722 CN5736 bracket (SUR)7 bracket (SUR)5 two screws (+BVTP 3 x 8)11STR-DE697SECTION 3TEST MODEFACTORY PRESET MODE* All preset contents are reset to the default setting.* Procedure:While depressing the FM MODE and the DISPLAY buttonssimultaneously, press the ?/1 butt

37、on to turn on the main power.The message “FACTORY” appears for a moment and the presentcontents are reset to the default values.AM CHANNEL STEP 9 kHz/10 kHz SELECTIONMODE (US, Canadian model only)* Either the 9 kHz step or 10 kHz step can be selected for the AMchannel step.* Procedure:Press the TUNE

38、R FM/AM button to set AM and press the ?/1button to turn off the main power.While depressing the PRESET TUNING + button or theTUNING + button, press the ?/1 button to turn on the mainpower.Either the message “9k STEP” or “10k STEP” appears for amoment and select the desired step.SPEAKER SIZE SELECTI

39、ON MODE* Either the normal speaker or micro satellite speaker can be se-lected.* Procedure:While depressing the DIMMER button, press the ?/1 button toturn on the main power.Either the message “NORM. SP.” or “MICRO SP.” appears for amoment and select the desired speaker size.FLUORESCENT INDICATOR TUB

40、E TEST MODE* All fluorescent segments are tested.When this test is activated, all segments light on at the sametime, then each segment lights on one after another.* Procedure:While depressing the TUNING - and the SPEAKERS $OFF/A/B/A+B% buttons simultaneously, press the ?/1 button to turn onthe main

41、power.1.ALL segments light on.2CH, A.F.D., MOVIE, MUSIC and MULTI CHANNEL DE-CODING LED light on.2.Press the VIDEO 1 button, confirm display.A.F.D. and MUSIC LED light on.3.Press the VIDEO 1 button, confirm display.2CH, MOVIE and MULTI CHANNEL DECODING LED lighton.4.Press the VIDEO 1 button, all seg

42、ments and all LEDs light off.5.Every pressing the VIDEO 1 button turns on each segment andLED one after another in the same order.(Not only the VIDEO 1 button, but also the other buttons suchas VIDEO 2, VIDEO 3, DVD, MD/TAPE, SA-CD/CD,TUNER FM/AM and AUX can be used.)SOUND FIELD CLEAR MODE* The pres

43、et sound field is cleared when this mode is activated.Use this mode before returning the product to clients uponcompletion of repair.* Procedure:While depressing the 2CH button, press the ?/1 button to turnon the main power.The message “SF. CLR.” appears for a moment and initializa-tion is performed

44、.SOFTWARE VERSION DISPLAY MODE* The software version is displayed.* Procedure:While depressing the TUNING - and the DISPLAY buttonssimultaneously, press the ?/1 button to turn on the main power.The model name, destination and the software version are dis-played for a moment.KEY CHECK MODE* Button ch

45、eck* Procedure:While depressing the TUNING - and the MAIN MENU buttonssimultaneously, press the ?/1 button to turn on the main power.Either the message “REST 28” appears.Every pressing of any button other than the ?/1 counts downthe buttons. The buttons which are already counted once are notcounted

46、again. When all buttons are pressed “REST 00” appears.AUTOBETICAL MODE (AEP, UK model only)* When this mode is used, the receiver scans the broadcasts thatcan be received by the tuner, and sets up the broadcasts.Be sure to start scanning after connecting the antenna.* Procedure:Check that the antenn

47、a is connected.While depressing the MEMORY button, press the ?/1 buttonto turn on the main power.The message “AUTO-BETICAL SELECT” appears for a mo-ment and the receiver starts scanning.COMMAND MODE SELECTION MODE* The command mode (AV1 or AV2) of the remote commandercan be selected.* Procedure:Whil

48、e depressing the ENTER button, press the ?/1 button toturn on the main power.Either the message “C.MODE.AV 1” or “C.MODE.AV 2” ap-pears for a moment and select the desired mode.LSWCRSLSSRSBLSBSBRLFESP A SP B SLEEP OPT COAX MULTI CH IN 96/24DIGITALEXPRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDSD.RANGE E

49、Q STEREO MONODDDDdBkHzmft.MHzMEMORYDIRECTLSWRSSBLFESP A SP B SLEEP OPT COAX MULTI CH IN 96/24DIGITALEXPRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDSD.RANGE EQ STEREO MONODDDDdBkHzmft.MHzMEMORYDIRECTCSLSRSBLSBRSP A SP B SLEEP OPT COAX MULTI CH IN 96/24DIGITALEXPRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDSD.

50、RANGE EQ STEREO MONODDDDkHzmft.MHzMEMORYDIRECT12STR-DE697SECTION 4DIAGRAMS4-1. IC PIN DESCRIPTIONS IC1501 CXD9718Q (DSP) (DIGITAL Board (2/3)Pin No.Pin NameI/OPin Description1VSSGround2XRSTIReset signal input from SYSTEM CONTROL IC3EXTININot used (Connect to ground)4LRCKI3INot used (Connect to groun