《IC-78_broch.pdf》由会员分享,可在线阅读,更多相关《IC-78_broch.pdf(4页珍藏版)》请在收音机爱好者资料库上搜索。
1、HF TRANSCEIVER The IC-78 is a high performance HF transceiver. Innovative features such as 99 memory channels, high C/N ratio, direct channel entering, data com- munication capabilities and more, offer easy operation for anyone. All these features come in a compact, rugged package that can be conven
2、iently used in a base station or in a vehicle, as you prefer. Reliable straight forward HF communications With the speaker facing the operator, audio sounds can be clearly heard without im- pediment during operation. It is no longer necessary to manually increase the volume to try and capture audio
3、sounds. When the optional CR-338 HIGH STABILITY CRYSTAL UNITis installed, it allows up to 0.5 ppm of extremely high stable operation. Durable, powerful construction Flexible filter selection High frequency stability Front mounted loud speaker An optional IF fi lter can be installed into the transcei
4、ver, providing 5 passband widths selectable in SSB, CW or RTTY modes. VFO mode operation* For continuous frequency operation, VFO mode operation* capability is available. It is convenient when searching for signals, around the programmed frequencies, such as short wave broadcasts, etc. *depending on
5、 version Superior basic performance A 4-element system is employed for the 1st receive mixer, providing superior receive IMD, especially from in-band, nearby inter- fering signals. A well-designed double-con- version system to help minimize image and spurious responses for better signal fi delity, i
6、s also built-in. A newly designed PLL circuit has been adopted to improve C/N ratio characteristics. The combination of the 4- element system mixer and new PLL circuit allows superior basic performance. An affordable 99 duplex memory channels are available for storing individual transmit and receive
7、 frequencies, operating mode, fi lter setting, as well as 8-character channel names. You can enter channel assign- ments easily from the 10-key pad. In addi- tion, an extra 1 call memory is available for storing the most often used, or most impor- tant frequency. An independent, one-touch recall swi
8、tch is available. The IC-78 is equipped with a large easy-to- read LCD. A minimum number of switches and controls allow for superior feature se- lectability. Keys access functions directly theres no secondary function key. You can enter your operating frequency*, or mem- ory channel number directly
9、from the 10- key pad. *depending on version Simple operation Ample 99 channels with 8-digit channel name capability The IC-78 delivers a powerful 100 W of out- put power, providing the talk power you need to reach the most distant locations. Its one-piece, die-cast aluminum construction combined wit
10、h a large heat sink, helps keep internal temperatures down and en- sures that operation is stable at high duty cycles. And its compact size of 240(W) 95(H)239(D) mm* makes installation easy. *9716(W)334(H)91332(D) in. Direct channel selection A 10-key pad has been adopted on the front panel. A chann
11、el number, or an operating frequency*, can be entered from the keypad directly. Also, memory channel editing is possible. A large channel selector and up/down keys are available to suit your operating style for your convenience. Total and simple oper- ation is provided! *depending on version Cloning
12、 capability Programmed data cloning capability between transceivers is available, so that an identical transceiver set- ting can be made immediately. Built-in 2-tone alarm* The 2-tone alarm for an emergency signal transmission is built-in*. Inde- pendent tone switch is adopted for quick and simple e
13、mergency calls. *depending on version Data communications In addition to the current voice and key operation, FSK (First Shift Keying) type RTTY mode is available. By connecting a terminal unit or termi- nal node controller to the ACC socket on the rear panel, data ac- quisition and text-base fi le
14、transfers and other data communication can be made. On RTTY, shift width, tone frequencies and polarization are also selectable. Superior features support serious communications Noise blanker To reduce pulse-type noise, a level adjustable noise blanker is built-in. Various levels of pulse-type noise
15、, such as from car ignitions, etc., can be reduced. Pre-amp. and attenuator A pre-amplifi er and an RF attenua- tor are adopted for more pleasant reception. Convenient when weak signals or extremely strong signals are received, to present better qual- ity readability. SQL/RF gain controller In addit
16、ion to the squelch control, an RF gain control is available, and the controller is combined with the squelch control. The RF gain ad- justs minimum response receiver gain, and ignores signals weaker than the pre-set level providing pleasant stand-by, or scanning. The SQL/RF GAIN controller action is
17、 selectable from squelch only, RF gain only or combined, in the SET mode according to your operating style and mode. Other features Built-in mic. compressor increases average talk power Complete CW features Variety of scanning function types IF shift interference rejection Built-in antenna tuner con
18、trol circuit and selectable antenna tuner Hand microphone is supplied VOX capability, and more. MB-23 CARRYING HANDLE For easy portability. Frequency range: Rx0.03029.999999 MHz*1 Tx1.60029.999999 MHz*2 *1Guaranteed range: 0.529.999999 MHz *2Not guaranteed for some frequency bands Mode: USB, LSB, CW
19、, RTTY (FSK), AM Number of memory Ch.: 99 (Duplex)+1(Call channel) Frequency stability: Less than 200 Hz from 1 min. to 60 min. after power ON. After that rate of stability less than 30 Hz/hr. at +25C (+77F) . Temperature fl uc- tuations 0C to +50C (+32F to +122F)less than 350 Hz Power supply requir
20、ement: 13.8 V DC 15 % (negative ground) Current drain (at 13.8 V DC): ReceiveStand-by1.3 A max. audio2.0 A Transmitmax. power20.0 A Operating temp. range: 10C to +60C; +14F to +140F Antenna connector: SO-239 (50 ) Dimensions: 240(W)95(H)239(D) mm (projections not included)9716(W)334(H)91332(D) in We
21、ight (approx.): 3.8 kg; 8 lb 6 oz ACC connector: 13-pin REMOTE connector: 2-conductor 3.5 (d) mm (18) Modulation system: SSBBalanced modulation AMLow level modulation Output power: SSB, CW, RTTY2100 W AM240 W Spurious emissions: Less than 46 dB below peak out- put power Carrier suppression: More tha
22、n 40 dB Unwanted sideband: More than 50 dB Microphone connector: 8-pin connector (600 ) KEY connector: 3-conductor 6.5 (d) mm (14) SEND connector: Phono (RCA) ALC connector: Phono (RCA) Receiver system: Double-conversion superheterodyne Sensitivity (10 dB S/N): SSB, CW, RTTY0.16V (1.60029.999999 MHz
23、) (0.5 V at 12 dB SINAD) AM13 V (0.51.599999 MHz) 2 V (1.60029.999999 MHz) SQL sensitivity: Less than 5.6 V (SSB) Selectivity: SSB, CW, RTTYMore than 2.1 kHz/6 dB Less than 4.5 kHz/60 dB AMMore than 6.0 kHz/6 dB Less than 20 kHz/40 dB Spurious and image: More than 70 dB rejection ratio(1.60029.99999
24、9 MHz) Audio output power: More than 2.0 Wat 10% distortion (at 13.8 V DC)with an 8 load PHONES connector: 3-conductor 6.5 (d) mm (14) EXT SP connector: 2-conductor 3.5 (d) mm (18) /8 HF TRANSCEIVER GENERAL SPECIFICATIONS OPTIONS RECEIVER Supplied accessories: Hand microphone DC power cable Spare fu
25、ses FL-52A CW/RTTY narrow; 500 Hz/6 dB FL-53A CW narrow; 250 Hz/6 dB FL-222 SSB narrow; 1.8 kHz/6 dB FL-257 SSB wide; 3.3 kHz/6 dB HM-36 HAND MICROPHONE Same as that supplied. CT-17 CI-V LEVEL CONVERTER For remote transceiver control from a PC equipped with an RS- 232C port. AH-4 AUTOMATIC ANTENNA T
26、UNER Covers 3.530 MHz with a 7 m (23 ft) or longer wire antenna. TRANSMITTER CR-338 HIGH STABILITY CRYSTAL UNIT Contains a temp. compensating heater for improved frequency sta- bility. Frequency stability: 0.5 ppm AH-2b ANTENNA ELEMENT For mobile operation with the AH- 4. All bands between 730 MHz c
27、an be matched. 455 kHz FILTERS Have good shape factor and pro- vide you with better reception. SM-6 DESKTOP MICROPHONE Electret condenser-type desktop microphone. SM-20 DESKTOP MICROPHONE High quality desktop microphone. Includes.UP/DOWN switches and low cut function. AH-710 FOLDED DIPOLE ANTENNA Co
28、vers from 1.9 to 30 MHz. Has a SO-239 connector. Easy to as- semble (non-kink construction). MN-100 ANTENNA MATCHER Match the transceiver to a dipole antenna without applying DC power. 8 m2 antenna wires come attached. MN-100LANTENNA MATCHER Match the transceiver to a long- wire antenna without appl
29、ying DC power. 15 m1 antenna wire comes attached. All stated specifi cations are typical and subject to change with- out notice or obligation. IC-MB5 MOBILE BRACKET For insatlling the transceiver under a table, in a vehicle, etc. PS-125 DC POWER SUPPLY Compact power supply with high current capabili
30、ty. Output: 13.8 V DC (25 A max.) SP-21 EXTERNAL SPEAKER Input impedance: 8 Max. input power: 5W SP-20 EXTERNAL SPEAKER is also available. SP-23 EXTERNAL SPEAKER 4 audio fi lters; headphone jack. Input impedance: 8 Max. input power: 5W (Not available for EU countries) approx. 24.5 m; 80.3 ft AT-140
31、HF AUTOMATIC ANTENNATUNER Covers 1.630 MHz with a 7 m (23 ft) or longer wire antenna. AT-130/E is also available. CACHET REVENDEUR ICOM FRANCE Zac de la Plaine - 1, Rue Brindejonc des Moulinais BP 5804 - 31505 TOULOUSE CEDEX Tl : 05 61 36 03 03 - Fax : 05 61 36 03 00 WEB ICOM : http:/www.icom- E-mail : icomicom- Les spcifications et informations donnes dans ce document peuvent tre modifies sans pravis.