《ts570dg-sg_update.pdf》由会员分享,可在线阅读,更多相关《ts570dg-sg_update.pdf(2页珍藏版)》请在收音机爱好者资料库上搜索。
1、TS-570D(G) HF Transceiver TS-570S(G) HF+6m Transceiver OPTIONAL ACCESSORIES TS-570D(G)/TS-570S(G) GENERAL Transmitter Frequency Range160, 80, 40, 30, 20, 17, 15, 12, 10, 6 TS-570S(G) only meter bands Receiver Frequency Range500 kHz 30 MHz, 50 MHz 54 MHz ModeA1A (CW), J3E (SSB), A3E (AM), F3E (FM), F
2、1D (FSK) Power Requirement13.8 V DC 15% Current Drain (approx.)20.5 A (transmit), 2 A (standby) Operating Temperature14 F +122 F (-10 C +50 C) Frequency StabilityWithin 10 x 10-6 (0.5 x 10-6 with SO-2) Antenna Impedance50 Microphone Impedance600 Dimensions, projections not included (W x H x D) 10-5/
3、8 3-3/4 10-11/16 inch (270 96 271 mm) Weight (approx.)15 lbs (6.8 kg) TRANSMITTER RF Output PowerSSB/CW/FM/FSK: 100 W; AM: 25 W Modulation SSB FM AM Balanced modulation Reactance modulation Low-power modulation Maximum Frequency Deviation (FM) Less than 5 kHz (wide) Less than 2.5 kHz (narrow) Spurio
4、us RadiationLess than -50 dB Carrier SuppressionMore than 40 dB Unwanted Sideband Suppression More than 40 dB Transmit Frequency Response (SSB) 400 2600 Hz (within -6 dB) XIT Variable Range9.99 kHz Antenna Tunable Range16.7 150 SPECIFICATIONS RECEIVER Circuitry SSB/CW/AM/FSK FM Double Superheterodyn
5、e Triple Superheterodyne Intermediate Frequency 1st IF 2nd IF 3rd IF 73.05 MHz 8.83 MHz 455 kHz (FM only) Sensitivity SSB/CW/FSK (S/N 10 dB) AM (S/N 10 dB) FM (12 dB SINAD) Less than 4 V (500 kHz 1.705 MHz), Less than 0.2 V (1.705 24.5 MHz), Less than 0.13 V (24.5 30 MHz), Less than 0.13 V (50 54 MH
6、z) Less than 31.6 V (500 kHz 1.705 MHz), Less than 2 V (1.705 24.5 MHz), Less than 1.3 V (24.5 30 MHz), Less than 1.3 V (50 54 MHz) Less than 0.25 V (28 30 MHz), Less than 0.25 V (50 54 MHz) Squelch Sensitivity SSB/CW/AM/FSK FM Less than 20 V (500 kHz 1.705 MHz), Less than 2 V (1.705 30 MHz), Less t
7、han 2 V (50 54 MHz) Less than 0.25 V (28 30 MHz), Less than 0.25 V (50 54 MHz) Spurious Response Image Ratio IF Rejection Others More than 70 dB More than 70 dB More than 50 dB Selectivity SSB/CW AM (wide mode) FM More than 2.2 kHz (-6 dB), Less than 4.4 kHz (-60 dB) More than 4.0 kHz (-6 dB), Less
8、than 20.0 kHz (-50 dB) More than 12.0 kHz (-6 dB), Less than 25.0 kHz (-50 dB) RIT Variable Range9.99 kHz Beat EliminationMore than 40 dB Audio Output PowerMore than 1.5 W (8 , 10% distortion, with -53 dBm input) Audio Output Impedance8 JQA-QMA1205 ADS#09606 Printed in USA VS-3 Voice Synthesizer Uni
9、t DRU-3A Digital Recording Unit HS-5 Deluxe Headphones (8 ) HS-6 Small Headphones (12.5 ) LF-30A Low-Pass Filter MB-430 Mobile Bracket MC-43S Hand Microphone MC-90 DSP-Compatible Desktop Microphone MC-60A Deluxe Desktop Microphone PG-2Z DC Power Cable PS-53 Heavy-Duty Power Supply (22.5 A) SO-2 TCXO
10、 (Temperature- compensated Crystal Oscillator)Unit SP-23 External Speaker SP-50B Mobile Speaker YK-88C-1* 8.83 MHz CW Filter (500 Hz bandwidth) YK-88CN-1* 8.83 MHz CW Narrow Filter (270 Hz bandwidth) YK-88SN-1* 8.83 MHz SSB Narrow Filter (1.8 kHz bandwidth) * One of 3 optional IF filters can be sele
11、cted for installation. Not all products are available in all markets. Kenwood has brought the best of HF DSP technology out of the clouds and into the hands of everyone with the new TS-570D(G) and TS-570S(G) (HF+6m). The G series represents the latest advancements in HF radio design from Kenwood, an
12、d is even available as an upgrade to pre-existing TS-570 units. Advanced Digital Technology for Everyone Kenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice. These specifications are guaranteed for Amateur Bands only. SPAC (
13、Speech Processing by Auto Correlation) Method (NR2) for CW. The Line Enhancer Method automatically forms a filter shape around the target signal for a custom, dynamic noise reduction cap- ability. In conditions where weak CW signals are buried deep in the noise, the SPAC Method has the ability to pu
14、ll them out with either the 20 milli-second or 7.5 milli-second correlation time settings. In addition, the DSP Beat Cancel function suppresses multiple beats on SSB, FM and AM immediately upon detection, great for 40-meter broadcast station carriers. AF-stage Digital Signal Processing Interference
15、Reduction AF-stage digital signal processing provides extensive control over received signals by identifying and filtering interference using digital algorithms. This results in interference reduction capabilities simply not attainable with analog designs. In addition, the new NR1 system is operator
16、-adjustable in 9-step increments, or it can be assigned to track input signal strength automatically. Both the NR1 and NR2 settings now track when changing mode groups (eg. SSB/AM/FM to CW/FSK). The new Dual Selectable Beat Cancel (BC) function also works against inter- mittent beat interference (ex
17、cept in CW mode). In SSB/AM/FM modes you can select a Hi/Low cut DSP slope tune using up to 441 possible combinations. In CW and FSK, the DSP acts as a VBT (Variable Band Tuning) that alters passband width, for rejection of nearby signals. The super-narrow CW filter (50 Hz) enables effective filteri
18、ng even during very crowded conditions, with its center frequency tied to the pitch frequency so they track together. The G model also incorporates 3 new CW DSP filters: 80 Hz, 150 Hz, 500 Hz, for a total of 11 user-selectable filters. You can now also use the “One-touch” DSP filter wide mode to ins
19、tantly check band conditions when oper- ating in narrow mode. When used in conjunc- tion with the equalizer, the CW filter reduces ringing to almost undetectable levels. There are also 3 optional fil- ters that can be easily installed (one at a time) to acquire various IF filter bandwidth selections
20、 (see optional accessories). The DSP also pro- vides 2 types of noise reduction the Line Enhancer Method (NR1) for SSB/AM and the EASYOPERATION High-end radio technology doesnt mean a high-end budget anymore Kenwood delivers it today with the all-new TS-570D(G) and TS-570S(G) (HF+6m). With 16-bit DS
21、P technology, untouchable digital filtering, heavy-duty transmitter design, a Central Frequency Control System for near-perfect stability, and a large LCD display section coupled with an ergonomically-optimized human interface, the TS-570D/S(G) provides a clean and powerful operating experience. All
22、 of this wrapped up in a compact and efficient package makes the TS-570D/S(G) the perfect choice for home or mobiling in your car, RV or boat. TARGET SIGNAL BEAT BEAT BEAT CANCELED SIGNAL On 6m too! DSP 100 watts Preset Auto Antenna Tuner TS-570S(G) HF+6m Transceiver (Accessories sold separately.) 1
23、6-bit AF-stage DSP delivers superb audio quality on both transmit and receive Adjustable transmit sound quality and NR1 Noise Reduction System Digital filtering with 3 new CW DSP filters give you the edge when conditions are tough Compact enough for mobiling, yet large enough to build a station arou
24、nd Scanning The TS-570D/S(G) has a wealth of scanning capabilities including variable speed with time- based or carrier-based resume modes, channel scan, group channel scan, all except locked out channels, or it can be programmed to scan a fre- quency range between two channels. The scan- hold funct
25、ion stops the scanning for 5 seconds. Large LCD The amber-colored backlight LCD frequency display is large, with a 4-stage dimmer, and is laid out in a clear and informative manner. The 7-digit alphanumeric sub-display provides menu mode guidance, split frequency display and digital filter selection
26、 options. The accompany- ing analog meter provides S-readings, PWR, COMP, SWR and ALC information. Optimal Sizing The 10-5/8 X 3-3/4 inch panel size make the TS-570D/S(G) suitable for any mobile operation, yet its large display and sophisticated user features make it a perfect candidate to build a f
27、irst-class base station with. This versatility means that you only need one radio for all your home and field operations. High Performance Transmitter Section The heavy-duty transmitter makes the TS-570D/S(G) ideal for contesting, mobiling and FSK applications, delivering between 5 and 100 watts in
28、5 watt increments. The large heatsink and high-capacity cooling fan system designed specifically for this model enables continuous operation under a wide range of environmental conditions. High frequency stability is achieved with a one-point frequency control system that uses a single crystal to co
29、ntrol all internal oscillating frequencies (except in FM mode). Stability can even be raised to a pro-grade +/- 0.5 PPM (within 7 Hz on the 14 MHz band) with the optional SO-2 TCXO. TX Audio Shaping You have 3 ways of tailoring your transmit audio with DSP: Voice Equalizer, Transmit Equalizer and Sp
30、eech Processor functions, plus you can use the new 9-step TX sound quality monitor volume for precision control. On SSB and AM you can choose between 2 types of Voice Equalizer transmit frequency response set- tings according to your microphone and operat- ing requirements. The Transmit Equalizer of
31、fers 4 frequency response settings on SSB, FM and AM: high boost for improved clarity, bass boost for stronger sound, formant pass to minimize extraneous sounds, and conventional mode for an analog sound. The Speech Processor works across three bands (SSB, FM and AM) for high compression and minimal
32、 distortion. By com- bining the Speech Processor gain settings with the Transmit Equalizer, you are able to shape your voice for virtually any application, plus it is now available for RX as well, complete with its own independent settings. CW Auto Tune a World first Now you no longer have to adjust
33、 the VFO while operating on CW the CW Auto Tune function does it for you automatically by adjusting the VFO to your preset pitch at the touch of a button. In the new G models the CW auto tune mode links only with the RIT frequency without changing the transmit frequency so incoming traffic can be tr
34、acked even if it is slightly off frequency. Operator-Engineered Features The TS-570D/S(G) represents the latest advancements in the human-machine interface as applied to radio transceiver design. Kenwood engineers have achieved a fine balance between size, features, display, controls and performance
35、 to deliver a transceiver that will give you out- standing results regardless of your operating style or location. New Menu and User Features There are 46 types of menu features to assist both the novice and expert operator. The On- line Guide feature provides information on a scrolling sub-display
36、so you wont need to refer to the manual, the click encoder and entry keys provide a positive tactile feedback, frequencies can be directly entered on the 10-key pad, and radio controls can be customized by assigning specific menus, features, or panel switches to the Programmable Function (PF) key. A
37、nd of course, Kenwoods Fine mode allows 1 Hz steps on the VFO dial for precise manual tuning. Extensive Memory Functions You have a bank of 100 memories available, with 90 assignable for standard memories and 10 for programmable VFO, programmable scan and long- term memory functions. The scroll func
38、tion lets you browse memory contents, memory channel copy sends the contents of one channel to another, lock-out memory changes the scan map to exclude certain channels, and memory shift alters the frequency stored in a channel. In addition, there are 5 quick memories to capture a current operation
39、on-the-fly, available in SSB, CW, FM, AM and FSK modes ideal for contest operation. Built-in Keyer The full-featured electronic keyer provides solid and reliable keying at any speed with dual key inputs on the back one for a paddle and one for a key. You can choose between the new Manual Weight feat
40、ure where the relative length of dots and dashes can be altered in 16 steps between 1:2.5 and 1:4.0, or two types of Auto- Weight one that adjusts to the keying speed automatically and one that works on a fixed weight percentage. The Weight Reverse function lessens the weight as the keying speed inc
41、reases, allowing for easier switching between keying hands. And during CW message playback, the paddle input can be prioritized with the Insert Keying Settings function. Packet contact your dealer for details. Kenwoods TS-570D/S(G) with Advanced Technology Upgrade Kenwoods TS-570D/S(G) with Advanced
42、 Technology Upgrade Operator-Oriented Engineering Provides You with the Highest Levels of Performance. Operator-Oriented Engineering Provides You with the Highest Levels of Performance. The Feature Packed TS-570D(G)/TS-570S(G) is the Perfect Choice for Any and All Requirements. The Feature Packed TS-570D(G)/TS-570S(G) is the Perfect Choice for Any and All Requirements.