Kenwood_micro-processor_reset_procedures.pdf

上传人:cc518 文档编号:196205 上传时间:2025-03-07 格式:PDF 页数:4 大小:24.45KB
下载 相关 举报
Kenwood_micro-processor_reset_procedures.pdf_第1页
第1页 / 共4页
Kenwood_micro-processor_reset_procedures.pdf_第2页
第2页 / 共4页
Kenwood_micro-processor_reset_procedures.pdf_第3页
第3页 / 共4页
亲,该文档总共4页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

《Kenwood_micro-processor_reset_procedures.pdf》由会员分享,可在线阅读,更多相关《Kenwood_micro-processor_reset_procedures.pdf(4页珍藏版)》请在收音机爱好者资料库上搜索。

1、Kenwood Micro-Processor Reset Procedures 1. TM-201A/401A/211A/411A - Depress the reset switch with a non conductive rod through the reset opening on the bottom cover. 2. TM-221A/321A/421A/521A With the power off press the VFO/M, & M.IN keys, and turn the radio on. 3. TM-231A/331A/431A/531A With the

2、power off press the MR key, and turn the power on. 4. TM-241A/441A/541A With the power off press the MR/M key, and turn the power on. 5. TM-2530A/2550A/2570A/3530A With the power off press the PS key, and turn the power on. 6. TM-701A With the power off press the MR key, and turn the radio on. 7. TM

3、-621A/721A With the power off press the F key, and turn the radio on. 8. TM-631A/731A With the power off press the MR key, and turn the radio on. 9. TM-641A/741A/941A With the power off A. VFO Reset Individual Band: Press the VFO key, & the Band Sel, and turn the Radio on. B. All Band VFO Reset: Pre

4、ss the VFO key, and turn the radio on. C. All Band MEMORY Reset: Press the MR key, and turn the radio on. D. Individual Memory Band Reset: Press the F key, & BAND SEL key, and turn the power on. 10. TM-642A/742A/942A With the power off A. VFO Reset Individual Band: Press the VFO key, & the Band Sel,

5、 and turn the radio on. B. All Band VFO Reset: Press the VFO key, and turn the radio on. C. All Band MEMORY Reset: Press the MR key, and turn the radio on. D. Individual Memory Band Reset: Press the F key, & BAND SEL key, and Turn the radio on. 11. TM-251A/451A With the radio off A. Partial reset pr

6、ess the VFO key, and turn the radio on. B. Full reset press the MR key, and turn the radio on. 12. TM-732A VFO Reset with the power off press the VFO key, and turn the radio on. Memory reset with the power off press the MR key, and turn the radio on. 13. TM-733A Partial Reset single band press the V

7、FO, & BAND SEL key, and turn the radio on. Partial Reset Both Bands press the VFO key, and turn the radio on. TM-733A Full Reset with the radio off press the MR key, and turn the radio on. The OK-MR-KEY flashes in the display, now press the MR again to complete the reset procedure. 14. TM-255A/455A

8、Partial reset with the power off press the A/B key, and turn turn the radio on. Full reset press the MR key, and turn the radio on. 15. TR-7930/7950 To reset the radio turn the radio upside down, there is a hole in the bottom cover near the front , press the microswitch for reset. 16. TW-4000A Turn

9、on power and set the transceiver in receive mode. Short the 2P terminal once for the microprocessor reset. Used a non conductive object. There is a small hole in the bottom cover close to the front panel, and centered In the middle of the radio. (WHEN RESETTING BE SURE NOT TO SHORT ANY PINS OTHER TH

10、AN 2P TERMINAL TO PREVENT THE MICRO- PROCESSOR FROM BEING DAMAGED) 17. TW-4100A With the power off press the M key, and turn the power on. 18. TR-50 With the power on use a non conductive object to reset the radio through a small hole in the bottom cover. 19. TR-751A/851A With the power off press th

11、e M key, and turn the radio on. 20. TR-2600A/3600A With the power on insert a non-metallic rod into the small hole in the backside of the case close to the battery to reset. 21. TR-2500A/3500A With the power on insert a non-metallic rod into the small hole in the backside of the case close to the ba

12、ttery to reset. 22. RZ-1 With the power off press the ENTER key, and turn the radio on. This will reset everything but your memories. For a full reset press the M key, And turn the radio on. 23. R-2000 Disconnect the power cable with the power switch ON. Remove the receiver top cover ( 8 screws). Gr

13、ound pin 40 of the IC-12 on the PLL unit for about 5 seconds. Reconnect power, keep the M.IN switch depressed and ground pin 29 of IC-12 for a few seconds. Remove and then reinsert the power cable. 24. R-5000 - With the radio off press the A=B button, and turn the radio on. The display will show 14.

14、000 MHZ. 25. TH-215A/315A/415A/225A With the radio off press the F, & ENTER key, and turn the radio on. 26. TH-25A/45A/55A With the radio off press the M key, and turn the radio on. 27. TH-26A/46A With the power off press the VFO key, and turn the radio on for a VFO reset. For a full reset press the

15、 F key, and turn the radio on. 28. TH-27A/47A With the power off press the M key, and turn the radio on for Memory Reset. For VFO Reset press the VFO key, and turn the radio on. 29. TH-28A/48A With the power off press the M key, and turn the radio on for Memory Reset. For VFO reset press the F key,

16、and turn the radio on. 30. TH-235A With the power off press the F key, and turn the radio on for Memory Reset. For VFO reset press the VFO key, and turn the radio on. 31. TH-22AT/42AT -With the power off press the F key for memory reset, and turn the radio on. For VFO reset with the power off press

17、the VFO key, and turn the radio on. 32. TH-G71A - With the power off press the F key for (memory reset), and turn the radio on. For VFO reset with the power off press the VFO key, and then turn the radio on. 33. TH-79A/AD/AKSS - With the power off press the F key for (memory reset), and turn the rad

18、io on. For VFO reset with the power off press the VFO key, and then turn the radio on. 34. TH-D7A, TH-D7A(G) With the power off press the F key, and turn the radio on. Reset appears in the screen, now press up or down on the jog cursor to select either VFO or FULL reset, now press OK. Now press up o

19、r down, and select Yes or No now press OK. 35. TH-75A With the power off press the M key, and turn the radio on. 36. TH-77A - With the power off press the M key, and turn the radio on for Memory Reset. For VFO reset press the ENT key, and turn the radio on. 37. TH-78A - With the power off press the

20、M key, and turn the radio on for Memory Reset. For VFO reset press the F key, and turn the radio on. 38. TS-670 With the power off press the HOLD key, and turn the radio on. 39. TS-430S/440S/140S/450S/680S/690S/711A/790A/811A/850S/940S/950S,SD,SDX/ TS-50S/60S/570D/S/ 870S With the power off press th

21、e A=B key, & power on. 40. TS-2000/TS-2000X/TS-B2000 With the power off (partial reset), press the A/B and turn the radio on. With the power off (full reset), press the A=B key and turn the power on. 41. TM-261A / TM-461A With the radio off press the MR key (memory reset), and turn the radio on. For

22、 a VFO reset with the radio off press the VFO key, and then turn the radio on. 42. TM-G707A With the radio off press the MR key (memory reset), and turn the radio on, next step press OK. For a VFO reset with the radio off press the VFO key, and then turn the radio on, next step press OK. 43. TM-V7A

23、With the radio off press the MR key (memory reset), and turn the the radio on, then press the MR key again. VFO reset with the radio off press the VFO key, and turn the radio on, then press the VFO again. 44. TM-D700A With the radio off press the MR key (memory reset), and turn the radio on, now press OK. VFO reset with the radio off press the VFO key, and turn the radio on, now press OK.

展开阅读全文
相关资源
猜你喜欢
相关搜索
资源标签

当前位置:首页 > 火腿一族 > Kenwood

copyright@ 2008-2025 收音机爱好者资料库 版权所有
备案编号:鄂ICP备16009402-5号