TS-990S_Internet_lan_user.pdf

《TS-990S_Internet_lan_user.pdf》由会员分享，可在线阅读，更多相关《TS-990S_Internet_lan_user.pdf（34页珍藏版）》请在收音机爱好者资料库上搜索。

1、TS-990S KENWOOD NETWORK COMMAND SYSTEM Setting Manual March/29/2013 1 CONTENTS 1. Relevant Models . 2 2. Objectives of this document . 3 3. Outline . 4 3.1. Overall Configuration . 4 3.2. Outline of Host Station (Transmitter) Operations . 6 3.3. Host Station (Transmitter) Configuration . 6 3.4. Outl

2、ine of Remote Station (Operator) Operations . 9 3.5. Remote Station (Operator) Configuration . 9 4. Settings . 11 4.1. Connecting a Communications Cable . 11 4.2. Connecting an Audio Cable . 11 4.3. Transceiver Settings . 13 4.4. Setting Transmission Methods for Audio Input to the ACC2 Connector . 1

3、6 4.5. Setting a Broadband Router . 18 4.6. Software Installation and Settings . 19 4.7. Windows Firewall Settings . 21 4.8. Comprehensive Security Software Settings . 21 4.9. Making the Host Station Connection Request Wait Mode . 21 4.10. Connecting to the Host Station from the Remote Station . 21

4、5. Limitations Caution! . 22 5.1. PC Environment Limitations . 22 5.2. Network Environment Limitations . 22 5.3. Program Limitations . 23 5.4. Limitations if Using USB Audio Functions . 23 6. Frequently Asked Questions . 24 (Supplement): FAQ: Explaining the Internet Cannot operate transceiver . 32 D

5、isclaimer: All efforts have been made regarding the accuracy of the contents described in this document. However, there is a possibility of misprints and of descriptions that may cause misunderstanding. JVC KENWOOD Corporation bears absolutely no responsibility for damages arising thereof. JVC KENWO

6、OD Corporation may revise and amend the product information described in this document without notice. JVC KENWOOD Corporation bears absolutely no responsibility for damages arising thereof. Windows is a registered trademark or trademark of Microsoft Corporation in the United States and other countr

7、ies. .NET Framework is a registered trademark or trademark of Microsoft Corporation in the United States and other countries. Bluetooth is a registered trademark or trademark of Bluetooth SIG, Inc. The names of all products described hereafter are the trademarks or registered trademarks of their res

8、pective manufacturers. and are omitted throughout the text. 2 1. Relevant Models This operations guide is for the TS-990S. Using the TS-990S and the KENWOOD NETWORK COMMAND SYSTEM (hereinafter called KNS) enables transceiver operations by remote control using a home LAN or the internet. KNS is a sys

9、tem configured using PCs, network environments, ARCP-990 (a Radio Control Program; hereinafter called ARCP-990”), ARHP-990 (a Radio Host Program; hereinafter called “ARHP-990”), and ARVP-10 (a VoIP Program; hereinafter called “VoIP Program”) for remote control of the TS-990S. Note: If the firmware v

10、ersion of the TS-990S is V1.00, please update it to V1.01 or later. Important To configure the system, knowledge not only of transceivers but also of PCs and networks is required. JVC KENWOOD does not offer support for customer PCs and Networks. Furthermore, for operations relating to actual transmi

11、tting, note that procedures according to the Radio Act are also required. Operations via networks may be delayed due to unavoidable principles. Consequently, do not perform operations (such as contests or pile-ups requiring quick responses) for which delays are likely to be a problem. Even if you se

12、t by the procedures described in this document, the feature may not work properly because of the combination of PC, the network environment and the sound device. Refer to “5. Limitations Caution!” for other limitations. JVC KENWOOD Corporation shall bear no responsibility for related damage such as

13、damage caused by missed communications and dialog opportunities due to incorrect customer settings, nonconformances, or misoperations as a result of using this document or the ARCP-990, ARHP-990 or ARVP-10 software. 3 2. Objectives of this document To supply information to configure a remote control

14、 system via a home LAN or internet using the TS-990S, ARCP-990, ARHP-990 and VoIP Program. Programs and Functions Functions Location ARCP-990 Operates transceiver remotely Remote Station ARHP-990 Receives the display data from the transceiver, and sends it over the network to the ARCP. Also receives

15、 control data sent from the ARCP, and sends it to the transceiver. Host Station VoIP Program Transmits and receives audio between the host station and the remote station. Remote Station Host Station Requirements Via Internet Home LAN Programs used ARCP-990 ARHP-990 VoIP Program ARCP-990 ARHP-990 Tra

16、nsmits and receives audio Requires VoIP Program. (The VoIP feature that is built into the ARCP-990 and ARHP-990 cannot be used.) Use the VoIP feature that is built into the ARCP-990 and ARHP-990. Or use a VoIP Program. Network Connection via the internet (To use the internet, a contract with a provi

17、der is necessary.) Connection using a home LAN IP address used Global IP address Local IP address Application based on the Radio Act Application using the internet Application using a home LAN 4 3. Outline 3.1. Overall Configuration 図：3.1.1 家庭内 LAN 構成例 （図、等省略。） Fig. Example of a home LAN configurati

18、on (In this diagram, the modem, router, and hub have been omitted.) As shown in the diagram, the configuration uses a host station (where the transceiver is installed; this is called the transmitter in the Radio Act) and a remote station (which performs the remote operations; this is called the oper

19、ator in the Radio Act). A PC is connected to both, and the PCs are connected to each other via the network. The transceiver connected to the PC to which the ARHP-990 has been installed on the host station is operated using the ARCP-990, which has been installed on the remote station PC. Furthermore,

20、 transmitted and received audio for the transceiver on the host station can be transmitted and received using the VoIP Program to and from the microphone and speaker connected to the PC sound device on the remote station. LAN 5 Fig. Example of a KNS configuration via the internet The host station an

21、d remote station can be installed in any location with a home LAN connection or internet connection. 6 3.2. Outline of Host Station (Transmitter) Operations The host station is configured using a transceiver and a PC connected to the network. Data signals that control the transceiver are connected t

22、o the PC using either LAN, USB or RS-232C. The PC uses its sound function to input and output audio transmitted and received by the transceiver, and converts them between digital and analog signals. The ARHP-990 is installed on the PC. In the case of use via the internet, VoIP Program is installed o

23、n the PC. The ARHP-990 exchanges transceiver control data signals with the network. The VoIP Program exchanges audio transmissions with the network. The PC is connected to the network, and exchanges transceiver control data signals and audio transmissions with the Remote station (operator) on the ne

24、twork. 3.3. Host Station (Transmitter) Configuration TS-990 PC Sound devices ARHP-990 VoIP Software USB/RS-232C (Transceiver control) LAN/WAN (Commnunication with Remote Station) LAN (Transceiver control) Audio transmission In this diagram, the modem, router, and hub have been omitted. Connection LA

25、N, USB or RS-232C Controls that change the frequency or mode are performed by connecting the transceiver and PC using either a USB cable or RS-232C cable. (The transceiver has only one RS-232C connector, so if you are using the RS-232C connector for KNS operations, another device cannot be connected

26、.) There is also a way to connect both the transceiver and PC to the home LAN. Since the transceiver control communication is high-speed, this method is recommended. Audio The audio cable is created by the user. To exchange audio transmissions, connect the transceiver ACC2 connector to the PC sound

27、I/O terminal. For the transceiver connector specifications, refer to the TS-990S instruction manual, and for the cable creation and connection methods, refer to 4.2. Connecting an Audio Cable. 7 PC Specifications CPU and memory: Minimum values recommended by the operating system. HDD: To install bot

28、h the ARHP-990 and the VoIP Program, a minimum of approx. 100 MB of free disk space is required. If you are saving connection logs, additional memory space is required. Sound function To exchange audio transmissions, a sound function is required. Network function Connects to the home LAN. To perform

29、 KNS operations via the internet, connect to a network that is connected to the internet. A wired network is recommended. Software Operating System Use: Windows XP (SP3 or later), Windows Vista (SP1 or later, 32-bit version only), or Windows 7 (RTM or later, 32-bit or 64-bit version). Other operatin

30、g systems are not compatible. Run-time To use KNS operations on Windows XP, Microsoft .NET Framework 2.0, 3.0 or 3.5 is required. If it is not installed, Microsoft .NET Framework 4.0 will be installed when installing the ARHP-990. ARHP-990 This software controls the transceivers. Refer to the softwa

31、re help for the settings and operation methods. Download the software from the KENWOOD website, and install it onto the PC. _download.html VoIP Program This software exchanges audio transmissions via the internet. Example: ARVP-10 (See Note 1.) Refer to the software help for the settings and operati

32、on methods. Download the software from the KENWOOD website, and install it onto the PC. _download.html LAN environment Broadband router To implement KNS operations via the internet, a model on which port forwarding settings are possible using the following protocol is required to transmit the data s

33、ignals that control the transceiver and audio. (See Note 2.) Protocol: TCP; port No.: 50000 (ARHP-990 default value) Protocol: UDP; port No.: 33500 (ARVP-10 default value) Modem Not specified. 8 Firewall To implement KNS operations via the internet, firewall environments configured using in-house co

34、mpany networks cannot be used. Use a home LAN environment. Internet environment Provider To implement KNS operations via the internet: A high-speed wired broadband environment using xDSL, FTTH, or CATV network is required. (1Mbps min. recommended.) A global IP address is required. (See Note 3.) The

35、ability to use protocols and ports to transmit the data signals that control the transceiver and audio is required. Protocol: TCP; port No.: 50000 (ARHP-990 default value) Protocol: UDP; port No.: 33500 (ARVP-10 default value) For details, contact your internet service provider. Proxy A proxy server

36、 cannot be used. Note 1: Other general purpose VoIP program can be used instead of the ARVP-10. Support for selecting, installing, and operating VoIP software is not available from JVC KENWOOD Corporation. Note 2: Refer to the user manual for the broadband router to be used before performing the set

37、tings. Note 3: KNS operations are possible even if the global IP address is variable, but the IP address may change with uncertain timing. In such cases, it is necessary to check and change the IP address of the connected host when connected from a remote station, which reduces user-friendliness. Co

38、nsequently, using an environment in which the host station global IP address is fixed, is recommended. Furthermore, if the global IP address cannot be fixed, using a dynamic DNS service enables operations in the same way as an environment with a fixed global IP address. 9 3.4. Outline of Remote Stat

39、ion (Operator) Operations The remote station is configured using a PC connected to the network, and a microphone and speaker connected to the PC sound function. The audio transmissions for the host station transceiver are input and output using the microphone and speaker connected to the sound funct

40、ion of the remote station PC via the network. The ARCP-990 is installed on the PC. In the case of use via the internet, VoIP Program is installed on the PC. The host station transceiver connected via the network is controlled by the remote station ARCP-990 operations. The ARVP-10R is a VoIP program

41、and supplies the transceiver with the transmitted and received audio of the host station side to the microphone and speaker of the PC of the remote station side. 3.5. Remote Station (Operator) Configuration PC Sound Device ARCP-990 VoIP Software TX Audio LAN/WAN (Communication with host station) RX

42、Audio Connection Audio To exchange audio transmissions, connect the microphone and speaker, or a headset to the PC sound function. Use products compatible with the sound function used. PC Specifications CPU and memory: Minimum values recommended by the operating system. HDD: To install both the ARCP

43、-990 and VoIP Program, a minimum of approx. 100 MB of free disk space is required. If you are saving transceiver settings to data files, or saving keying logs, additional memory space is required. Sound function To exchange audio transmissions, a sound function is required. Network function Connects to the home LAN. To perform KN