Icom_IC-F7000_broch.pdf

《Icom_IC-F7000_broch.pdf》由会员分享，可在线阅读，更多相关《Icom_IC-F7000_broch.pdf（4页珍藏版）》请在收音机爱好者资料库上搜索。

1、HF TRANSCEIVER Advanced selective call and ALE make HF communication easier than ever! The IC-F7000 is an HF land mobile transceiver especially designed for long distance communications. Such communications used to require specially skilled operators, but the IC-F7000 makes HF LMR operation simple a

2、nd effi cient with the following advanced functions and features. Selective call Uses a unique calling address like a telephone number and allows you to make a call directly to a desired station or group. Compatible with other brands of radios. ALE (Automatic Link Establishment) function This functi

3、on will check frequency propagation and strength to automatically select the highest quality signal for the best communication possible. Versatile confi guration The controller and speaker are separated from the main unit. Also, the size of the main unit in particular has been reduced, so that the I

4、C-F7000 can be in- stalled almost anywhere. CONTROLLER GPS ACC REMOTEREF INAF/MOD TUNER GND EXT SP DC 13.8V ANT EMGI/OTUNESCANCALLMUTE 1 QZ 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PRS 8 TUV 9 WXY CLR 0 ? OK HF TRANSCEIVERiF7000 GPS receiver (Not supplied from Icom) RC-26 HM-155 HF e-mail or PC remote contro

5、l (Not supplied from Icom) HF modem (Not supplied from Icom) PC control with NMEA format To ACC connector or AF/MOD connector SP-25 The speaker connec- tion is selectable. *1 GPS position call, GPS beacon call, Pagecall and Status call use Icom original commands. These calls may not be compatible wi

6、th other brands. *2 Please consult with a telephone interconnect service provider for details. Other capabilities available with selective call and ALE Selcall Make an individual/group call using a unique 4-digit (or 6-digit) address. The receiving station sends back an acknowledge (ACK) signal and

7、the scanning stops to allow you to communicate. Selective beacon call allows you to check the propagation before an individual/ group call. The receiving station sends back an ACK signal and continues scanning. GPS beacon call*1 allows you to request the intended ID station to send position informat

8、ion. The receiving station automatically sends back position information. GPS position call*1 allows you to send your own position information to the intended ID station. Status call*1 requests to send radio status information including power supply voltage, output power and VSWR. This allows you to

9、 monitor the radio station from a remote location. Pagecall*1 allows you to send and receive up to 64-character text messages with the intended ID station. Received messages are recorded in the memory of the radio. Telcall*2 allows you to make a telephone call through a telephone interconnect servic

10、e provider. Up to a 16-digit telephone number can be programmed. Allows you to broadcast an emergency signal with own position information. The RFDS (Royal Flying Doctor Service) emergency call uses a 2-Tone signal for an emergency call. (* Australia version only) Automatically sends a sounding sign

11、al at a certain interval (0.516 hours) to check the channel propagation and stores the data in a table. Automatically selects the best available channel using the ALE table and establishes a connection. The ALE system complies with the basic requirements of MIL-STD 188-141-B (Appendix A). Allows you

12、 to send and receive up to a 90-character text message using the ALE function. Received messages are stored in the memory of the radio. Selective beacon call GPS beacon call GPS position call Status call Pagecall Telcall Emergency selcall RFDS emergency call* ALE sounding ALE individual/net call ALE

13、 AMD (Automatic Message Display) Ample memory channels The IC-F7000 stores 400 channels, 100 ALE channels, 100 telephone numbers, 100 Selcall IDs and 120 ALE IDs. 20 page- call with up to 64-character messages and 20 ALE, including up to 90-character ALE AMD messages are stored. General coverage rec

14、eiver Wide band, general coverage receive ca- pability is available from 0.5 to 29.999MHz. Automatic tuning antenna The AT230 automatic tuning antenna is recommended for use with the IC-F7000. The AT230 fully cov- ers 230MHz. It is also easily installed to a vehicle. Digital Signal Processor (DSP) T

15、he DSP allows fl exible fi lter setting for J2B (AFSK), F1B (FSK) communication. Op- tional filters are not required for improved fi lter performance. Other features GPS input (NMEA0183 version 3.01) External 32MHz reference input for accu- rate tuning Voice, S-meter and Call mute Optional antenna t

16、uner, AT-140 available with antenna element, AH-2b Versatile configurationVersatile configuration The controller and speaker are separated from the main (RF) unit for flexible installa- tion. A 6m separation cable is attached to the controller. The main unit is only 72mm (227/32 in) in height, so th

17、ere is almost no The controller and speaker are separated from the main (RF) unit for flexible installa- tion. A 6m separation cable is attached to the controller. The main unit is only 72mm (227/32 in) in height, so there is almost no limit to the places where the IC-F7000 can limit to the places w

18、here the IC-F7000 can be set-up. The supplied hand microphone, HM-155, allows you to control most of the IC-F7000 functions. be set-up. The supplied hand microphone, HM-155, allows you to control most of the IC-F7000 functions. Large and clear indication with the dot-matrix LCD Large and clear indic

19、ation with the dot-matrix LCD All operational and status information is easily viewed on the full dot-matrix LCD. Editing a message or reading a received message are made easy. Also 10 levels of All operational and status information is easily viewed on the full dot-matrix LCD. Editing a message or

20、reading a received message are made easy. Also 10 levels of LCD bacLCD backlighting are aklighting are av vailabailable fle for clear or clear and bright illumination.and bright illumination. 125W of powerful RF output125W of powerful RF output A full 125W* of output power is available for reliable

21、long distance communication. An effective cooling mechanism allows contin- uous transmission at full output power. A full 125W* of output power is available for reliable long distance communication. An effective cooling mechanism allows contin- uous transmission at full output power. * 100W only for

22、 Australia version and for 4MHz bands and above for General version. * 100W only for Australia version and for 4MHz bands and above for General version. Versatile configuration The controller and speaker are separated from the main (RF) unit for flexible installa- tion. A 6m separation cable is atta

23、ched to the controller. The main unit is only 72mm (227/32 in) in height, so there is almost no limit to the places where the IC-F7000 can be set-up. The supplied hand microphone, HM-155, allows you to control most of the IC-F7000 functions. Large and clear indication with the dot-matrix LCD All ope

24、rational and status information is easily viewed on the full dot-matrix LCD. Editing a message or reading a received message are made easy. Also 10 levels of LCD backlighting are available for clear and bright illumination. 125W of powerful RF output A full 125W* of output power is available for rel

25、iable long distance communication. An effective cooling mechanism allows contin- uous transmission at full output power. * 100W only for Australia version and for 4MHz bands and above for General version. approx. 24.5 m; 80.3 ft 30 m; 98.4 ft Recommended Recommended optionoption Recommended option 1

26、-1-32, Kami-minami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302Fax: +81 (06) 6793 0013Count on us!www.icom.co.jp/world Printed in Japan 2380 116th Avenue NE, Bellevue, WA 98004, U.S.A. Phone : +1 (425) 454-8155 Fax: +1 (425) 454-1509 E-mail : URL: Unit 1 / 103 Garden Road, Clayton, VI

27、C 3168 Australia Phone : +61 (03) 9549 7500 Fax: +61 (03) 9549 7505 E-mail : .au URL: .au Blacksole House, Altira Park, Herne Bay, Kent, CT6 6GZ, U.K. Phone : +44 (01227) 741741 Fax : +44 (01227) 741742 E-mail : infoicomuk.co.uk URL: http:/www.icomuk.co.uk Zac de la Plaine, 1 Rue Brindejonc des Moul

28、inais, BP 45804, 31505 Toulouse Cedex 5, France Phone : +33 (5) 61 36 03 03 Fax: +33 (5) 61 36 03 00 E-mail : icomicom- URL: http:/www.icom- Ctra. Rubi, No. 88 Edificio Can Castanyer Bajos A 08174, Sant Cugat del Valles, Barcelona, Spain Phone : +34 (93) 590 26 70 Fax: +34 (93) 589 04 46 E-mail : UR

29、L: 146A Harris Road, East Tamaki, Auckland, New Zealand Phone : +64 (09) 274 4062 Fax : +64 (09) 274 4708 E-mail : inquiriesicom.co.nz URL: http:/www.icom.co.nz Glenwood Centre #150-6165 Highway 17, Delta, B.C., V4K 5B8, Canada Phone : +1 (604) 952-4266 Fax: +1 (604) 952-0090 E-mail : URL: Your loca

30、l distributor/dealer:6F No. 68, Sec. 1 Cheng-Teh Road, Taipei, Taiwan, R.O.C. Phone : +886 (02) 2559 1899 Fax : +886 (02) 2559 1874 E-mail : salesasia- URL: http:/www.asia- 10C07, Long Silver Mansion, No.88, Yong Ding Road, Haidian District, Beijing, 100039, China Phone : +86 (010) 5889 5391/5392/53

31、93 Fax: +86 (010) 5889 5395 E-mail : URL: 81-850 Sopot, ul. 3 Maja 54, Poland Phone : +48 (58) 550 7135 Fax: +48 (58) 551 0484 E-mail : .pl URL: .pl Communication Equipment Auf der Krautweide 24 65812 Bad Soden am Taunus, Germany Phone : +49 (6196) 76685-0 Fax: +49 (6196) 76685-50 E-mail : URL: HF T

32、RANSCEIVER 03ES031H 20032011 Icom Inc. SPECIFICATIONS HM-155HAND MICROPHONE RC-26 REMOTE CONTROLLER Remote function microphone and remote controller head. Same as supplied. OPC-1286/OPC-1286N SHIELDED CONTROL CABLE 10m (32.8ft) shielded control cable connects between AT-140 and transceiver. OPC-1286

33、N is for use with AT-140 (Version 36). AT230 AUTOMATIC TUNING ANTENNA (Moonraker Australia Pty. Limited) 2.6m (8.5ft) length mobile mount whip antenna covers 230MHz with automatic tuning function. Continuous CW transmission at high power not guaranteed with AT230. SP-25 EXTERNAL SPEAKER External spe

34、aker. Same as sup- plied. Input impedance: 4. Max. input power: 7W. AH-2b ANTENNA ELEMENT For mobile operation with the AT- 140 or AT-130/E. All bands be- tween 730MHz can be matched. MN-100 ANTENNA MATCHER Match the transceiver to a dipole antenna without applying DC power. 8m2 antenna wires come a

35、ttached. MN-100L ANTENNA MATCHER Match the transceiver to a long- wire antenna without applying DC power. 15m1 antenna wire comes attached. AT-140 HF AUTOMATIC ANTENNATUNER Covers 1.630MHz with a 7m (23 ft) or longer wire antenna. AT-130/E is also available. AH-710 FOLDED DIPOLE ANTENNA Covers from

36、1.9 to 30MHz. Has an SO-239 connector. Easy to as- semble (non-kink construction). OPC-1287 SHIELDED CONTROL CABLE 5m (16.4ft) shielded control cable connects between Moonraker AT230 and transceiver. Frequency coverage (Unit : MHz): Rx0.5 29.9999 (continuous) Tx1.629.9999* * Some frequency ranges ar

37、e not guaranteed. Type of emission*:J3E (USB, LSB), J2B (AFSK), F1B (FSK), A1A(CW), A3E (AM) * J3E and A3E only at factory default for Australia version. Number of channels: 400 regular channels, 100 ALE channels Antenna impedance: 50(SO-239) Power supply requirement :13.8V DC (10.815.6V) Current dr

38、ain (at 13.8V DC): Operating temp. range :10C to +60C Frequency stability: 50Hz (at 10C to +60C) Dimensions (WHD; projections not included): Main unit24072239mm; 97162273291332in Controller 1505051mm; 52932131322 in Speaker1066246mm; 4316271611316in Weight: Main unit4.6kg; 10.1lb Controller220g; 7.7

39、oz Speaker370g; 13oz Output power (Selectable): Australia1.629.9MHz100, 50, 10W PEP General1.63.9MHz125, 50, 10W PEP 4.029.9MHz100, 50, 10W PEP Spurious emissions: 43dB below peak output power (General version 3.53.99MHz: 40dB) Carrier suppression: 40dB below peak output power Unwanted sideband: 50d

40、B below peak output power (with 1500Hz AF Input) Microphone impedance: 600 Sensitivity (pre-amp. ON): Squelch sensitivity (at S-meter): J3E(at 13.800MHz)Less than 10V (threshold) Less than 32mV (tight) A3E (at 1.000MHz)Less than 32V (threshold) Less than 320mV (tight) Spurious response rejection rat

41、io: (1.629.9999MHz)More than 70dB Audio output power: 4.0W typical at 10% distortion (at 13.8V DC)with a 4 load Clarity variable range : 150Hz Speaker connector: 2-conductor 3.5 (d)mm (18)/4 GENERALTRANSMITTER RECEIVER 0.5 1.5999MHz 1.6 29.9999MHz J3E (at 20dB SINAD) 25.1V emf 12.6V 1.0V emf 0.5V A3

42、E (at 20dB SINAD) 200V emf 100V Supplied accessories: Hand microphone, HM-155 External speaker, SP-25 Remote controller, RC-26 Microphone hanger DC power cable ACC plugs (8-pin DIN) Tuner connector kit Spare fuses Mounting bracket kits for main unit and remote controller Unit: mm (inches) 239.3 (913

43、/32) 72 (2 27/32) 260 (101/4) 240 (97/16) 6 (1/4)19 (3/4) DIMENSIONS All stated specifi cations are subject to change without no- tice or obligation. Measurements made in accordance with AS/NZS4770-2000. (Australia version only) Recommended Recommended optionoption Recommended option TxRx 2-ToneVoic

44、eMax. Audio Australia1.629.9MHz15A10A3.0A General 1.63.9MHz17A12A 3.0A 4.029.9MHz16A11A OPTIONS Standard MIL 810 F MethodProcedure High Temperature501.4I, II Low Temperature502.4I, II Vibration514.5I Shock516.5I Also meets equivalent MIL-STD-810-C, -D and -E. Applicable U.S. Military Specifi cations