Kenwood_TK-5210_user.pdf

《Kenwood_TK-5210_user.pdf》由会员分享，可在线阅读，更多相关《Kenwood_TK-5210_user.pdf（14页珍藏版）》请在收音机爱好者资料库上搜索。

1、 B62-1796-10 (K) 09 08 07 06 05 04 03 02 01 INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES VHF APCO P25 TRANSCEIVER TRANSCEPTOR APCO P25 VHF TK-5210 i WARNING: EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.) Turn off your transceiver while taking on fuel, or while parked in gasoline service stations. G

2、OVERNMENT LAW PROHIBITS THE OPERATION OF UNLICENSED RADIO TRANSMITTERS WITHIN THE TERRITORIES UNDER GOVERNMENT CONTROL. ILLEGAL OPERATION IS PUNISHABLE BY FINE OR IMPRISONMENT OR BOTH. REFER SERVICE TO QUALIFIED TECHNICIANS ONLY. SAFETY: It is important that the operator is aware of and understands

3、hazards common to the operation of any transceiver. THANK YOU We are grateful you chose KENWOOD for your land mobile radio applications. We believe this easy-to-use transceiver will provide dependable communications to keep personnel operating at peak efficiency. KENWOOD transceivers incorporate the

4、 latest in advanced technology. As a result, we feel strongly that you will be pleased with the quality and features of this product. NOTICES TO THE USER This device made under license under one or more of the following US Patents: 4,590,473; 4,636,791; 4,716,407; 4,972,460; 5,148,482; 5,185,796; 5,

5、271,017; 5,377,229; 5,502,767. The IMBE voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communicatio

6、ns Equipment. The user of this Technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. ii One or more of the following statements may be applicable: ATTENTION (U.S.A. O

7、nly): The RBRC Recycle seal found on KENWOOD nickel-cadmium (Ni-Cd) battery packs indicates KENWOODs voluntary participation in an industry program to collect and recycle Ni-Cd batteries after their operating life has expired. The RBRC program is an alternative to disposing Ni-Cd batteries with your

8、 regular refuse or in municipal waste streams, which is illegal in some areas. For information on Ni-Cd battery recycling in your area, call (toll free) 1-800-8-BATTERY (1-800-822-8837). KENWOODs involvement in this program is part of our commitment to preserve our environment and conserve our natur

9、al resources. FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an un

10、authorized change or modification is made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection agai

11、nst harmful interference in a residential installation. This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interfere

12、nce will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorie

13、nt or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer for technical assistance. UNPACKING AND CHECKING EQUIPMENT Note: The following

14、unpacking instructions are for use by your KENWOOD dealer, an authorized KENWOOD service facility, or the factory. Carefully unpack the transceiver. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been da

15、maged during shipment, file a claim with the carrier immediately. SUPPLIED ACCESSORIES Item Parts Number Instruction Manual B62-1796-00 1 Pamphlet B59-2390-00 1 Belt Hook J29-0710-05 1 Screw Set N99-2044-05 1 Cap B09-0682-03 1 Appearance TOP No. Name Correspondence Note 1 Power SW/Volume control Typ

16、e 1/2/3 2 Selector Type 1/2/3 3 Concentric Switch Type 1/2/3 4 Lever Switch Type 1/2/3 5 Orange key Type 1/2/3 1 1 2 4 5 Front No. Name Correspondence Note 1 PF A key Type 2/3 2 PF B key Type 2/3 3 PF C key Type 2/3 4 PF D key Type 2/3 5 12 keypad Type 3 1 2 3 4 5 Type 3 Type 2 Type 1 Side No. Name

17、Correspondence Note 1 Side1 key Type 1/2/3 2 PTT Type 1/2/3 3 Side2 key Type 1/2/3 4 Side3 key Type 1/2/3 1 2 3 4 Left side Right side Key Type1 Type2 Type3 (Power SW/Volume) Power Switch/Volume Power Switch/Volume Power Switch/ Volume (Selector) 16 Position Rotaly SW 16 Position Rotaly SW 16 Positi

18、on Rotaly SW (Concentric Switch) 3 Position Selector 3 Position Selector 3 Position Selector (Lever Switch) 2 Position Selector 2 Position Selector 2 Position Selector (Orange) Orange Orange Orange (Side 1) Side 1 Side 1 Side 1 (Side 2) Side 2 Side 2 Side 2 (Side 3) Side 3 Side 3 Side 3 (PTT) PTT PT

19、T PTT (A) - A A (B) - B B (C) - C C (D) - D D (DTMF 12 Key) - - DTMF 1.1 LCD(Type2,Type3) Standard Display (2Line) Message Display (3Line) Conventional Trunking PREPARATION INSTALLING/ REMOVING THE (OPTIONAL) BATTERY PACK CAUTION: -DO NOT RECHARGE HE BATTERY PACK IF IT IS ALREADY FULLY CHARGED. DOIN

20、G SO MAY CAUSE THE LIFE OF THE BATTERY PACK TO SHORTEN OR THE BATTERY PACK MAY BE DAMAGED. -AFTER RECHARGING THE BATTERY PACK, DISCONNECT IT FROM THE CHARGER. IF THE CHARGER POWER IS RESET (TURNED ON AFTER BEING TURNED OFF), RECHARGING WILL START AGAIN AND THE BATTERY PACK WILL BECOME OVERCHARGED. -

21、DO NOT SHORT THE BATTERY TERMINALS OR DISPOSE OF THE BATTERY BY FIRE. -NEVER ATTEMPT TO REMOVE THE CASING FROM THE BATTERY PACK. 1 Match the four grooves of the battery pack with the corresponding guides on the back of the transceiver. 2 Slide the battery pack along the back of the transceiver until

22、 the release latch on the base of the transceiver locks. 3 To remove the battery pack, pull back on the release latch and slide the pack away from the transceiver. THE ANTENNA INSTALLING Screw the antenna into the connector on the top of the transceiver by holding theantenna at its base and turning

23、it clockwise until secure. INSTALLING THE BELT CLIP If necessary, attach the belt clip using the two supplied binding screws. Note: If the belt clip is not installed, its mounting location may get hotduring continuous transmission or when left sitting in a hot environment. INSTALLING THE COVER OVER

24、THE UNIVERSAL CONNECTOR If you are not using the optional KMC-* speaker/ microphone, install the cover over the universal connector using the supplied 4 x 6 mm dressing screw. INSTALLING THE (OPTIONAL KMC-25, KMC-25W) SPEAKER/ MICROPHONE 1 Insert the guide of the speaker/ microphone connector into t

25、he groove of the universal connector. 2 Secure the connector in place using the attached screw. RADIO FREQUENCY ENERGY SAFETY INFORMATION _ This KENWOOD transceiver has been tested and complies with the standards listed below, in regards to Radio Frequency (RF) energy and electromagnetic energy (EME

26、) generated by the transceiver. FCC RF exposure limits for Occupational Use Only. RF Exposure limits adopted by the FCC are generally based on recommendations from the National Council on Radiation Protection and Measurements, transmitting over 50% of the total use time may exceed the limits in acco

27、rdance to the FCC RF exposure requirements. Nominal transceiver operation is 5% transmission time, 5% reception time, and 90% stand-by time. Use only the specified antenna for this transceiver; this may be either the antenna provided with the transceiver or another antenna authorized by KENWOOD. Use

28、 only KENWOOD authorized accessories (antennas, battery packs, belt clips, Speaker/ Mics or headsets etc.): When worn on the body, always place the radio in a KENWOOD recommended clip or carrying case meant for this product. The use of other than recommended or approved body- worn accessories may re

29、sult in RF exposure levels which exceed the FCCs occupational/ controlled environment RF exposure limits. CAUTION To ensure that your exposure to RF EME is within the FCC limits for occupational use, you must observe and adhere to the above points. Electromagnetic Interference Compatibility Electron

30、ic devices are susceptible to electromagnetic interference (EMI) if they are not adequately shielded or designed for electromagnetic compatibility. Because this transceiver generates RF energy, it can cause interference to such equipment. Turn OFF your transceiver where signs are posted to do so. Hospitals and health care facilities use equipment that is sensitive to electromagnetic radiation. Turn OFF your transceiver while on board an aircraft when so instructed. Use of the transceiver must be in accordance with airline regulations and/or crew instructions.