Cobra_MT-725_user.pdf

《Cobra_MT-725_user.pdf》由会员分享，可在线阅读，更多相关《Cobra_MT-725_user.pdf（9页珍藏版）》请在收音机爱好者资料库上搜索。

1、Main Channel Number CTCSS Privacy Code Numbers Receive/Transmit Lock Power Saver Battery Level Indicator Dual Watch Baby Monitor VibrAlert/ Call Alert VOX Scan Roger Beep Keystroke Tone ENGLISH POWER Button VOLUME CONTROL Buttons MODE Button CHANNEL SELECT Buttons Speaker/ Microphone Belt Clip CALL

2、Button External Speaker/ Microphone Jack TALK Button LIGHT/MAX RANGE Button Battery Compartment Lock Tab Charge/Intercom Jack Antenna Two-Way Radio Model MT 725 LOCK Button Wrist Strap Connection Location Product Features Two-Way Radio with up to a 3 km (2 mile) range 8 Channels* 38 CTCSS Privacy Co

3、des Backlit LCD Display Water Resistant Battery Saver Circuitry Maximum Range Extender VOX Mode for Hands-Free Transmissions VibrAlertSilent Paging Baby Monitor Function Intercom Capability Call Alert (5 Selectable Tones) Scan (Channel, Privacy Code) Dual Watch Programmable 2-Location Scan Key Lock

4、Auto Squelch Selectable On/Off Roger Beep Confirmation Tone Selectable On/Off Keystroke Tone External Speaker/Microphone Jack Belt Clip Wrist Strap *You are not allowed to use channels 1 and 2 in France. This situation can change; please contact the French radio licensing authority for more informat

5、ion. This equiment is intended for use in: Countries of use PT SE CH SI SK TR LI LU MT NL NO PL HU IE IS IT LT LV EE ES FI FR GB GR AT BE CY CZ DE DK OPERATION Product Information This microTALKradio has been manufactured to meet all required standards for radio equipment using PMR 446 frequencies a

6、s authorized. The use of this two-way radio product involves the public airways and its use may be subject to local laws or regulations. Contact your radio licensing authority for more information. Caring for Your Radio Your microTALKradio will give you years of trouble-free service if cared for pro

7、perly. Here are a few suggestions: Handle the radio gently. Keep it away from dust. Never put the radio in water or in a damp place. Avoid exposure to extreme temperatures. Battery Installation To Install or Replace Batteries: 1. Remove belt clip by releasing belt clip latch and sliding clip Up. 2.

8、Pull down on the BATTERY DOOR LOCK TAB to remove the battery compartment cover. 3. Insert four (4) AAA batteries. (Always use high- English Radio Power To Turn Your Radio On: 1. Press and hold the POWER button until you hear a series of audible tones indicating that the radio is On. Your microTALKra

9、dio is now in LISTENING MODE, ready to receive transmissions. The radio is always in LISTENING MODE, except when the TALK, CALL or MODE buttons are pressed. To Turn Your Radio Off: 1. Press and hold the POWER button. Battery Low Indicator Battery power is indicated by the segments appearing at the b

10、ottom of the display. As battery power decreases, fewer segments will be visible. When the last segment begins to flash, the batteries should be replaced or recharged. WARNING: Only the NiMH battery pack FA-BP can be recharged. Battery/Power Saver If there are no transmissions within ten (10) second

11、s, the unit will automatically switch quality alkaline or recharageable batteries.) Position batteries according to polarity markings. 4. Replace Battery Compartment cover and belt clip. NOTE: See “Optional Accessories” for accessory availability and ordering instructions. Battery Charging When the

12、optional NiMH battery pack (part No. FA-BP) is used, the batteries can be charged using the optional rapid wall mount charger (part No. PA-CW). Simply place the battery pack in the battery compartment, open the CHARGE/INTERCOM tab on the side of the unit and insert the plug into the charge jack to s

13、tart charging. The batteries should be fully charged in about three (3) hours. WARNING: Only the NiMH battery pack FA-BP can be recharged. NOTE: See “Optional Accessories” for accessory availability and ordering instructions. to Battery Save Mode and POWER SAVER will appear in the display. This will

14、 not affect the units ability to receive incoming transmissions. Communicating with Another Person To Talk To Another Person: 1. Press and hold the TALK button. 2. With the microphone about 5 cm (2 inches) from your mouth, speak in a normal voice. 3. Release the button when you have finished talking

15、 and listen for a response. You cannot receive incoming calls while pressing the TALK button. NOTE: Both radios must be tuned to the same channel and privacy code to communicate. Remove Belt Clip Power Button Lock Tab Insert Batteries 5 cm (2 Inches) From Mouth Talk Button Battery Low Power Saver Ch

16、arging Batteries Charge/Intercom Tab OPERATION Listening for a Response When You Have Finished Talking: 1. Release the TALK button to receive incoming transmissions. Your microTALKis always in LISTENING MODE except when the TALK, CALL or MODE buttons are pressed. Volume To Adjust the Volume: 1. Pres

17、s the VOLUME UP or the VOLUME DOWN buttons. A triple beep sound is used to indicate that you have reached the minimum (1) or maximum (8) volume level. Call Button To Alert Another Person That You Are Calling: 1. Press and release the CALL button. The other person will hear a two (2) second ringing t

18、one. You cannot receive transmissions while sending a call. English Display Illumination To Illuminate Your Display: 1. Press and release the LIGHT/MAX RANGE button to illuminate the display for ten (10) seconds. Auto Squelch/ Maximum Range Extender Your microTALKradio is equipped with Auto Squelch,

19、 which automatically shuts off weak transmissions and unwanted noise resulting from terrain, conditions, or from reaching your maximum range limit. You can temporarily turn Off Auto Squelch or turn On Maximum Range Extender, allowing all signals to be received and extending the maximum range of your

20、 radio. To Temporarily Turn Off Auto Squelch: 1. Press the LIGHT/MAX RANGE button for less than five (5) seconds. If you hear two (2) beeps, you have turned the Maximum Range Extender On (see below). To Turn Maximum Range Extender On: 1. Press and hold the LIGHT/MAX RANGE button for at least five (5

21、) seconds until you hear two NOTE: Both radios must be tuned to the same channel and privacy code to communicate. Channels To Select a Channel: 1. With the radio on, select any of the 8 channels by pushing the CHANNEL UP or CHANNEL DOWN button. You can press and hold the CHANNEL UP or CHANNEL DOWN b

22、utton for fast advance. NOTE: Both radios must be tuned to the same channel and privacy code (see “CTCSS Privacy Codes”) to communicate. Lock Function The LOCK button locks the CHANNEL UP, CHANNEL DOWN, MODE and POWER buttons to prevent accidental operation. To Use the Lock Function: 1. Press and ho

23、ld the LOCK button for two (2) seconds to turn the Lock On or Off. A double beep sound is used to confirm your Lock On or Off request. When the radio is in Lock Mode, the Lock icon will be displayed. (2) beeps, indicating that the Maximum Range Extender is On. To Turn Maximum Range Extender Off: 1.

24、Press and release the LIGHT/MAX RANGE button or change channels. microTALKRange Your microTALKradio has a range of up to three (3) kilometres (2 miles). Your range will vary depending on terrain and conditions. In flat, open country your radio will operate at maximum range. Buildings and foliage in

25、the path of the signal can reduce the range. Dense foliage and hilly terrain will further reduce the signal. Remember, you can achieve maximum range by using Maximum Range Extender. See above for details. Light/Max Range Button Call Button Lock Button Channel Buttons Channels Lock Icon Volume Level

26、Volume Buttons Light/Max Range Button Maximum Range Reduced Range Reduced Range Listening OPERATION and MODE FUNCTIONS External Speaker/ Microphone Jack Your microTALKradio can be fitted with an optional external speaker/microphone (not included), freeing your hands for other tasks. NOTE: See “Optio

27、nal Accessories” for accessory availability and ordering instructions. To Attach the External Speaker/Microphone: 1. Open the SPKR/MIC tab on top of the radio. 2. Insert the plug into the SPKR/MIC jack. Intercom With the optional intercom adapter and two external speaker/microphone attachments, a si

28、ngle microTALKradio can be used as an intercom system. (Ideal for motorcyclists.) Contact your local dealer for availability and pricing. Scrolling Through the Mode Functions By scrolling through the Mode Functions, you will be able to select or change preferred features of your microTALKradio. Whil

29、e you are scrolling through the Mode Functions, your radio features will be displayed in the same predetermined order: English To Select a Privacy Code: 1. After selecting a channel, press and release the MODE button until the small numbers next to the channel number flash on the display. 2. Press t

30、he CHANNEL UP or CHANNEL DOWN button to select a privacy code. You can press and hold the CHANNEL UP or CHANNEL DOWN button for fast advance through CTCSS privacy code numbers. 3. When your desired privacy code is displayed, choose one of the following: a. Press the MODE button to enter the new sett

31、ing and proceed to other functions. b. Press the LOCK button to enter the new setting and return to LISTENING MODE. c. Do not press any buttons for fifteen (15) seconds to enter the new setting and return to LISTENING MODE. Voice Activated Transmit (VOX) In VOX Mode, your microTALKradio can be used

32、“hands-free,” automatically transmitting when you speak. You can set the VOX sensitivity level to fit Set CTCSS Privacy Codes Set VOX On/Off Set VOX Sensitivity Level Set Channel Scan Set CTCSS Privacy Code Scan Set VibrAlertand/or Call Alert Set Baby Monitor Program Dual Watch Location or Set Dual

33、Watch On/Off Set Call Tones Set “Roger Beep” On/Off Set Keystroke Tones On/Off CTCSS Privacy Codes CTCSS (Continuous Tone Coded Squelch System) is an advanced tone coding system allowing you to select one of 38 privacy codes to reduce incoming transmissions from other users on the channel. NOTE: If

34、you are using a privacy code, both radios must be tuned to the same channel and privacy code to communicate. Each channel will remember the last privacy code you selected. the volume of your voice and avoid transmissions triggered by background noise. To Turn VOX Mode On or Off: 1. Press the MODE bu

35、tton until the VOX icon flashes on the display. The current On or Off setting is displayed. 2. Press the CHANNEL UP or CHANNEL DOWN button to turn VOX On or Off. 3. When your desired VOX Mode setting is displayed, choose one of the following: a. Press the MODE button to enter the new setting and pro

36、ceed to other functions. b. Press the LOCK button to enter the new setting and return to LISTENING MODE. c. Do not press any buttons for fifteen (15) seconds to enter the new setting and return to LISTENING MODE. Mode Button Select Privacy Code Channel Buttons Channel Buttons Select VOX Mode Button

37、Intercom External Speaker/ Microphone MODE FUNCTIONS OPERATION To Set the VOX Sensitivity Level: 1. Press the MODE button until the VOX icon flashes and the current sensitivity level is displayed. The current sensitivity level is displayed with the letter “L” and a number 1 to 5, 5 being the most se

38、nsitive level and 1 being the least sensitive level. 2. Press the CHANNEL UP or CHANNEL DOWN button to change the setting. 3. When your desired VOX sensitivity level is displayed, choose one of the following: a. Press the MODE button to enter the new setting and proceed to other functions. b. Press

39、the LOCK button to enter the new setting and return to LISTENING MODE. c. Do not press any buttons for fifteen (15) seconds to enter the new setting and return to LISTENING MODE. Channel Scan Your microTALKradio can automatically scan channels (1 to 8). NOTE: The radio ignores specific CTCSS privacy

40、 English During An Incoming Transmission, You Can Choose From The Following: a. Press and hold the TALK button to communicate on that channel. Your radio will remain on that channel and return to LISTENING MODE. b. Press the CHANNEL UP or CHANNEL DOWN button to resume scanning channels. If you press

41、 the TALK button while scanning and not within ten (10) seconds of receiving a transmission, you will transmit on the channel on which you last received a transmission. This will return the radio to LISTENING MODE. If you do not press any button within ten (10) seconds, your radio will automatically

42、 resume scanning channels. During Scanning (while not receiving a transmission), You Can Choose From The Following: a. Press and hold the TALK button to communicate on either the channel or channel/privacy code that was displayed before you entered Mode Functions or the channel on which, during scan

43、ning, you last received a transmission. This will return the radio to LISTENING MODE. b. Press the MODE button to proceed to set CTCSS privacy code on the channel that was either displayed before you entered Mode codes while scanning channels. To Scan Channels: 1. Press the MODE button until the Sca

44、n icon and the channel number flash on the display. 2. Press the CHANNEL UP or CHANNEL DOWN button to begin scanning channels. The Scan icon will continue to be displayed when channel scan is On. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your rad

45、io will remain on that channel for ten (10) seconds. While setting channel scan, if you do not press any buttons for fifteen (15) seconds your radio will automatically return to LISTENING MODE on the channel or channel/privacy code displayed before you entered Mode Functions. Functions or on which,

46、during scanning, you last received a transmission (see “CTCSS Privacy Code Scan” for further details). c. Press the LOCK button to return to LISTENING MODE on either the channel or channel/privacy code that was displayed before you entered Mode Functions or the channel on which, during scanning, you

47、 last transmitted or received. CTCSS Privacy Code Scan Your microTALKradio can automatically scan the CTCSS privacy codes (01 to 38) within one (1) channel. To Scan Privacy Codes: 1. While in LISTENING MODE, press the CHANNEL UP or CHANNEL DOWN button to choose the channel on which you wish to scan

48、the CTCSS privacy codes. 2. Press the MODE button until the Scan icon and the small numbers next to the channel number flash on the display. 3. Press the CHANNEL UP or CHANNEL DOWN button to begin scanning CTCSS privacy codes within the channel you selected. Mode Button Channel Buttons Select Scan C

49、hannels Select Scan Privacy Codes Mode Button Channel Buttons Select Channel Channel Buttons Select VOX Sensitivity Level Mode Button MODE FUNCTIONS OPERATION The Scan icon will continue to be displayed when CTCSS privacy code scan is On. Your radio will continue to scan CTCSS privacy codes and stop as an incoming transmission is detected. Your radio will remain on that channel/privacy code for ten (10) seconds. While setting CTCSS privacy code scan, if you do not press any buttons for fifteen (15) seconds your radio will automatically return to LISTENING