Sailor_6300_user.pdf

《Sailor_6300_user.pdf》由会员分享，可在线阅读，更多相关《Sailor_6300_user.pdf（86页珍藏版）》请在收音机爱好者资料库上搜索。

1、SAILOR 6300 MF/HF DSC 150W/250W/500W USER MANUAL 98-131070-THR-B Manual 6301 cover.indd i98-131070-THR-B Manual 6301 cover.indd i10-10-2011 15:57:0210-10-2011 15:57:02 98-131070-THR-B Manual 6301 cover.indd ii98-131070-THR-B Manual 6301 cover.indd ii10-10-2011 15:57:2610-10-2011 15:57:26 SAILOR 6300

2、 MF/HF DSC 150W/250W/500W User manual Document number: 98-131070-B Release date: November 14, 2011 SAILOR6301_UM.book Page i Monday, November 14, 2011 2:06 PM Disclaimer Any responsibility or liability for loss or damage in connection with the use of this product and the accompanying documentation i

3、s disclaimed by Thrane errors are shown as underscores (_). SAILOR6301_UM.book Page 25 Monday, November 14, 2011 2:06 PM Chapter 2: Operation 26DSC calls Distress call log As long as you are part of a Distress session, i.e. you have not pressed QUIT, you receive Distress messages and can track all D

4、istress messages for the current Distress event. 1.Press the soft key LOG. If it is not in the display, press the soft key MORE until LOG appears. 2. Press the soft key NEXT and PREV to browse the received Distress messages. 3. Press the soft key EXIT to leave the log. DSC calls With a DSC call you

5、can establish a radio communication with one or several specific radios on a suggested pair of frequencies or channel. To make a DSC call, do as follows: 1.Press the soft key CALL. The default call is an individual routine call. 2. Turn and press the selector knob to select a call type. For each DSC

6、 call type a number of parameters can be set. DSC call typeCatTo:DSC:ModeCMDChDEST CENTRE + RADIUS INDIVID.XXXXX SATETY TESTXX SAILOR6301_UM.book Page 26 Monday, November 14, 2011 2:06 PM Chapter 2: Operation DSC calls27 22222 Operation 3. Make the entries for the desired call type: 4. Press the sof

7、t key SEND to make the call. PositionXX GroupXXXX AreaXXXXX DSC call typeCatTo:DSC:ModeCMDChDEST CENTRE + RADIUS ItemDescription TO:Enter the 9-digit MMSI number of the vessel you want to contact or use the phone book (PHBOOK) to select a contact. DSC:Enter a frequency for the DSC call. Mode:Select

8、the sub communication mode SSB or TELEX FEC. Cat:Select a DSC call category, depending on the call type (Routine R, Safety S or Urgency U) CMD:Select Medical transport or Neutral crafts (if enabled in DSC setup on page 42). Only for the category: Urgency calls. Ch:Enter the suggested frequencies for

9、 voice communication. DEST CENTRE + RADIUS For Area calls enter the destination centre with latitude and longitude data, plus the destination radius in nm. For information about how areas must be entered see Geographical area calls on page 35. SAILOR6301_UM.book Page 27 Monday, November 14, 2011 2:0

10、6 PM Chapter 2: Operation 28DSC calls Printing DSC calls If a printer is connected to the SAILOR 6300 MF/HF DSC via LAN you can print DSC messages automatically. You can also print entire DSC call logs. To set up a default printer, do as follows: 1.Go to SETUP and use the arrow keys to advance to Sy

11、stem Setup 2. Select Printer Config:. 3. Select one printer as the default printer and press the selector knob to enter the choice. To print DSC messages, do as follows: 1.Go to SETUP and use the arrow keys to advance to DSC Setup. 2. Use the selector wheel to scroll to Print DSC. 3. Set Print DSC:

12、to ON. To print DSC call logs, do as follows: 1.Go to SETUP and use the arrow keys to advance to DSC call logs. 2. Select the call log you want to print. 3. Press the soft key PRINT. SAILOR6301_UM.book Page 28 Monday, November 14, 2011 2:06 PM Chapter 2: Operation DSC calls29 22222 Operation Session

13、s in the MF/HF radio What is a session? A DSC session is defined as a collection of DSC calls (transmitted and/or received) that are related to the same event (e.g. a Distress event) or established call (e.g. an individual call request followed by an acknowledgement). A session can be either active

14、or on hold. The active session has control over the radio transmitter. A session can have a purpose. For example if the purpose is to establish a communication on a working channel. The non-DSC communication (voice) is considered as a session that can be active (engaged) or on hold (dis-engaged). Se

15、e also Engagement status on page 13. Display for a session In the lower part of the display the type of session, the current state, MMSI number of the other party and lapsed time since the reception of a call request or an acknowledgment is shown. The session state icons, in the example V and R, sho

16、w the state of the session: ACTIVE the session icon is inverted, the transmitter tuned into the communication channel (in the example , a DSC Routine call). HOLD normal view, parked session (in the example, MF/HF voice communication. FLASHING Call has updates that need handling or viewing. Session s

17、tate Session line Session status icons SAILOR6301_UM.book Page 29 Monday, November 14, 2011 2:06 PM Chapter 2: Operation 30DSC calls For more information on the session state icons see Session state icons D, U, S, R, V and T below. Session state icons D, U, S, R, V and T Session icons in the session

18、 view inform you of the severity or category of the DSC call or Voice communication: D Distress category U Urgency S Safety R Routine V Voice (voice call, non-DSC) T Telex Session line The following table gives an overview of the information in the session line: Note If two identical polling or test

19、 calls are sent from the same MMSI and the operator wants to resend a confirmation to the second call received, it is necessary to put the session on hold and then activate it again. Session lineExplanation OWN DistressThe ship is in own Distress. See also To send a Distress alert on page 19. Distre

20、ss RXYou watch or participate in a Distress communication for another station in Distress RELAY calls (numerous) You watch or participate in a Distress communication for another station in Distress ALL SHIPS TX/RXYou have sent / received an all ships call GROUP TX/RXYou have sent / received a group

21、call SAILOR6301_UM.book Page 30 Monday, November 14, 2011 2:06 PM Chapter 2: Operation DSC calls31 22222 Operation Session status The following table gives an overview of the information in the session status: Soft keys for DSC sessions Call/session types vary in control options, and options may als

22、o change if a session changes its state. The following table gives an overview of the DSC soft key commands available: INDIVIDUAL TX/RXYou have either sent a call request to a station to establish contact, or another station has made a call to you to establish contact. The call needs a reply. TEST T

23、X/RXYou either have sent a SAFETY TEST call or have received a SAFETY TEST call from another station that needs to be replied. POSITION TX/RXA position request was either sent or received. Session lineExplanation Session statusExplanation WAIT FOR ACKNOWLEDGE You made an individual call to a station

24、 and are awaiting a reply to establish connection. OCCUPIEDThe DSC transmission mechanism waits until the selected DSC channel is free. TRANSMITTINGTransmission of a DSC message is ongoing. IN COMMUNICATION WITH The communication has been established Soft key DSC session Radio function QUITTerminate

25、s the DSC session SAILOR6301_UM.book Page 31 Monday, November 14, 2011 2:06 PM Chapter 2: Operation 32DSC calls HOLDPuts the DSC session on hold if it is active (return to other non-DSC functions) ACTIVEActivates the DSC session VIEWShows details about the DSC call RESENDTransmits an identical call

26、if available NEWCH Replies with a new channel if an individual call is received with a communication channel specified which is not available in the radio, or the operator decides to change the channel. UNABLE Constructs a reply to the caller if an individual call is received which is not compatible

27、 with the radio modes. SILENTSilences alarms. Any key silences the alarm but this soft key function will do only this. ACKAcknowledges a received call request with the suggested parameters. POS (Own Distress)A shortcut to own position data information. PAUSE (Own Distress)Pauses the automatic repeti

28、tion of Distress transmissions RESUME (Own Distress) Resumes automatic repetition of Distress transmissions (if paused) DIST ACKDistress acknowledgement. RELAYRelay a received Distress call. ANNUL (Cancel Own Distress) Cancels an inadvertently transmitted Distress CONFIRM (Cancel Own Distress) Confi

29、rms action and proceed sequence, used in cancel Distress procedure Soft key DSC session Radio function SAILOR6301_UM.book Page 32 Monday, November 14, 2011 2:06 PM Chapter 2: Operation DSC calls33 22222 Operation You find detailed information how to handle multiple calls in Handling multiple calls D

30、SC and voice on page 35. Information for DSC sessions (soft key: VIEW) A DSC session is updated based on DSC calls received or transmitted. Press the soft key VIEW to show the details for the current session. For Distress events a sequence of calls may contribute to the complete view and status of t

31、he session. Detailed fields for Distress are: INFO (in Cancel Own Distress) Turns page of text message. HIST (Received Distress) A filtered version of the log displaying received calls relevant to the current Distress event. Soft key DSC session Radio function Details DistressExplanation DISTR-MMSIT

32、he vessel in Distress NATNature of Distress LATLatitude position of station in Distress LONLongitude position of station in Distress POS UTCTime of position MODECommunication mode (SSB, Telex) 2 4 6 8 12 16Frequency bands for Distress alerts SAILOR6301_UM.book Page 33 Monday, November 14, 2011 2:06

33、PM Chapter 2: Operation 34DSC calls For other session types the soft key VIEW typically shows the details from a single call. Detail fields for other calls than Distress are: Receiving DSC calls If the radio is in stand-by mode, i.e. not engaged in another session, and a DSC call is received the cal

34、l details are shown on the display. Press the soft key SILENT or any other key to continue. You can acknowledge the call, put it on hold or display more information (soft key: VIEW). If you put the call on hold, the session icon for this call will flash until you have acknowledged the call. See also

35、 Display for a session on page 29. Details other callsExplanation CALL Type(on received call) The call type may be shown on call reception CATCategory of the call: Urgency, Safety or Routine FROMThe initiator of the call TOThe intended receiver of the call (unless All Ships) MODECommunication mode (

36、Simplex/Semi-duplex Telephony supported) CHANNELSubsequent communication channel LATLatitude position returned upon a position request LONLongitude position of station in Distress POS UTCTime of position SAILOR6301_UM.book Page 34 Monday, November 14, 2011 2:06 PM Chapter 2: Operation DSC calls35 22

37、222 Operation Handling multiple calls DSC and voice The SAILOR 6300 MF/HF DSC can control multiple DSC sessions simultaneously with a voice communication session. All sessions can keep track of their session state and the communication channel used. They are handled in their respective sessions, in

38、the order as they are started up. A call or session can be on hold (HOLD) or active (ACTIVE). If there are several calls ongoing, they are shown as tabs in the display with their state (active, on hold, requiring attention). The DSC sessions on hold can receive calls that are pertinent to the sessio

39、n, even when the session is not displayed. To close a session, the session must be active, then press the soft key QUIT. In case there are simultaneous alarms, they are sorted according to their priorities, the most important ones are shown first. In some cases alarm or pop-up messages terminate aut

40、omatically, then the display messages and audible alarms also disappear automatically. Geographical area calls When making a DSC area call, you must enter the position of the ship (x,y) and the radius of interest r. This information is transformed to a square with a corner point (a,b) and the length

41、 of its sides, a and b. Then the DSC message is transmitted. The illustration on this page shows the relation between the user input the white circle and the information transmitted the grey Note Note that there is one active call or session at a time. Use the soft key to switch between the ongoing

42、calls/sessions. SAILOR6301_UM.book Page 35 Monday, November 14, 2011 2:06 PM Chapter 2: Operation 36Phone book square. The center point is the position of the ship measured in degrees and minutes, whereas the radius of interest is in nautical miles. The corner point of the square (a2,b2) and the len

43、gth of its sides is given in degrees. Note that these values are rounded to degrees, and due to the requirement that the square shall include the entire circle; this will result in a slightly larger area than defined by the user input. Attention when close to the poles: If the latitude of the corner

44、 point a is transformed to a value greater that 90 then it is set to 90 and the length b is reduced correspondingly. If the length a is greater than 90 then a is set to 90. Phone book Use the phone book when making a DSC call. You can enter up to 50 contacts. The phone book is always sorted alphabet

45、ically by contact names. To sort phone book contacts use the soft key FILTER. The contacts can be sorted in ALL, COAST, SHIP or GROUP. Using the phone book to make a DSC call To call a contact using the phone book do as follows: 1.Press the soft key CALL. If it is not in the display, press the soft

46、key MORE until CALL appears. The DSC call composer is shown in the display. 2. Press the soft key PHBOOK. 3. Turn the selector knob to scroll to the phone book entry that you want to call and press the selector knob to select the contact. 4. Press the soft key SEND to make the call. SAILOR6301_UM.bo

47、ok Page 36 Monday, November 14, 2011 2:06 PM Chapter 2: Operation Phone book37 22222 Operation Adding a contact to the phone book To add a contact to the phone book do as follows: 1.Press the soft key PHBOOK. If it is not in the display, press the soft key MORE until PHBOOK appears in the display. 2

48、. Press the soft key ADD and fill in the details for the new contact. 3. Press the soft key SAVE to save the contact information. 4. Press the soft key EXIT to leave the phone book. ContactDescription NAMEEnter the name by turning the selector knob to the desired letter, press the selector knob to a

49、ccept the letter and advance to the next letter. To finish press the soft key OK. TYPEPress and turn the selector knob to select SHIP, GROUP or COAST STATION. MMSITurn and press the selector knob to enter the contacts MMSI number (9 digits), press the soft key OK to accept. For coast station contacts you can also enter a DSC channel. Ch (optional)Press and turn the selector knob to select the preferred channel for this contact, press the soft key OK. Position Auto Ack For SHIP or COAST STATION: Press and turn the selector knob to select