《Yaesu_FC-30_user.pdf》由会员分享,可在线阅读,更多相关《Yaesu_FC-30_user.pdf(5页珍藏版)》请在收音机爱好者资料库上搜索。
1、 Installation of the “FC-30” Parts List Screws (M3 x 6B). 2 Screws (M3 x 6B). 6 Mounting Plate A . 1 Mounting Plate B . 1 Mounting Plate C . 1 Installation 1. Turn the transceivers power off, and disconnect all cables from the transceiver. 2. Screw the mounting plate “A” to the FC-30 using the suppl
2、ied screws (figure 1). 3. Remove the four rubber lugs and its four screws (figure 2), then screw the mounting plate “B” and “C” so that its holes on the FT-897 using the supplied screws (figure 3). 4. To install the FC-30, position the FC-30 so that the mounting plate “A” on the side fit into the mo
3、unting plate “B” on the FT-897 (figure 3), then screw the mounting plate “C” (on the FT-897) to the FC-30 using the supplied screws (figure 1). Do not install the supplied FC-30 Mounting Screws if you are not installing the FC-30! Also, do not use an improper screw for mounting the FC-30! An improper screw may cause a short circuit to the internal circuitry, causing serious damage! Figure 2 Plate APlate BPlate C Figure 1 Figure 3 Plate A Plate B Plate C