BL PPRECISION 732A_manua 电路图.pdf

《BL PPRECISION 732A_manua 电路图.pdf》由会员分享，可在线阅读，更多相关《BL PPRECISION 732A_manua 电路图.pdf（19页珍藏版）》请在收音机爱好者资料库上搜索。

1、 CONTENTS Title Page I. SAFETY INFORMATION. 1 Environment conditions.1 Maintenance otherwise, the protection provided by the meter may be impaired. Environment conditions ? Altitude up to 2000 meters ? Relatively humidity 90% max. ? Operation Ambient 0 40C Maintenance At least 5 MB byte hard disk sp

2、ace available to install TestLink. Recommended resolution 800X600. 10 ? Install TestLink: 1.We recommend closing all other applications before installing the TestLink. 2.Insert setup CD disk to CD disk drive. 3.Choose the Start button on the Taskbar and select Run. 4.Type E:SETUP and choose OK, then

3、 it will copy AK73X.exe (executable file) and help file to your hard disk (default is c:program filesTestLinkAK73X). For detailed other operation instruction, please refer to the online help while executing AK73X. ? Main Menu File | Open- Retrieve files from the disk. Save - Save the active window (

4、when the caption bar is highlighted) data to the disk. Print - Print the data of the active window (graph or list). Printer Setup - Select printer. File | Exit: Terminates TestLink program. View | Control Panel: By opening the Panel Window, the user can control the meter via the button in this windo

5、w. View | Real-Time Graph: Open Real-Time Graph to display and graph the present data. Real Time Data | Run - Start collecting real time data. Stop - Stop collecting real time data. DataLogger: By opening the DataLogger Window, the user can load recorded data from the meter to the PC in this window.

6、 Output To Graph - Graphing tabular data. 11 Interface. For better result, the user may close the panel window. Graph Tool Bar - Display or hide Statistic1. - Display or hide Statistic2. - Normal cursor. - When selected, the mouse cursor will become a cross sign when moving to the graph, click on th

7、e graph to mark a cross sign on the graph. - When selected, the mouse cursor will become an I sign when moving to the graph, click on the graph to annotate. - Color graph. - Monochrome graph. You can choose a rectangle area on the graph to zoom in for detail. There are two vertical lines (CURSOR A a

8、nd CURSOR B) in the graph. There are 12 time and value display on top and right side of each cursor. You can move the mouse cursor over cursor A or B and click to drag the cursor to move left or right. Right below the cursor A and B is a slider. You can also click and drag slider to move cursor A or

9、 B. Below the slider is the statistic, it displays start time, sampling rate, data number, maximum and minimum of the graph. The statistic also displays the maximum, minimum and average between cursor A and B and these data will update automatically when cursor A or B is moving. You can double click

10、 the graph to call the option dialog. The option dialog, allowed you to customize your graph style. And you can right click the graph (real time graph is not allowed) to call out the popup menu. You can Zoom this graph by using mouse: To Zoom: 1. Press the left mouse button and drag the cursor to se

11、lect the new extents. 2. Release the mouse button. To Undo the Zoom - Right click on the graph, there will be a pop-up menu, select Undo Zoom . DataLogger 13 When you have the Sound Level DATA LOGGER meter connected to PC and select DataLogger from main menu or click from tool bar to load recorded d

12、ata from the meter and there will be a progress indicator to show the loading progress. if an error occurs, just click DataLogger again. After the data is loaded, the left hand side will show how many data sets were loaded and detail information for each data set (start data, start time, recording r

13、ate and record numbers). For examples: It will transfer data to a graph and tabular on the right hand side every time after you load recorded data from the Sound Level Meter and you can click at any data set to change the set for graph. On the right hand side is the waveform graph and statistic of t

14、he data set you choose. ? Tutorial - Quick Start to Use AK-73X TestLink (1.) Recording real time data in waveform. 1.Power on the Sound Level Meter first and connect it to a PC via the RS-232 serial port with the cable (SE-300) 2.Start AK-73X program. 14 3.If the connection is successful the panel w

15、ill display the same value as the Sound Level Meter. If it failed to connect the meter with the PC, it will display No Connection on the panel window in TestLink AK 73X. 4.When the connection is successful, click to start recording real time data and there will be a waveform on the Real Time Graph W

16、indow. 5.Click to start recording. (2.) How to save the recorded real time data to a file? 1.Click on the graph window you want to save and the graph window will become active, then choose File | Save from main menu or click from the tool bar. 2. There will be a save dialog window for you to choose

17、the file name and file type to save. There are three types of file names you can choose, binary file (*.ghf), text file (*.txt) and EX CEL format file (*.csv). The *.ghf file use much fewer disk space to save the data than the other two file format, but it can only be used in TestLink AK-73X. Text f

18、ile can be opened by TestLink AK-73X and any other word processor program like word, notepad etc. EXCEL format file can be opened by TestLink AK-73X and Microsoft EXCEL. 15 (3.) How to load the recorded data from the memory of Sound Level Meter and save it to a file ? (Only for the model with Data L

19、ogger) 1. Power on the Sound Level Meter. 2. Press the REC button of the meter to start recording data. 3. After a while, press REC button again to stop recording data. 4. Connect the Sound Level Meter to PC 5. Start AK-73X program. 6. Choose Data Logger from main menu or click from tool bar. 7.In r

20、eference to Data Logger, see DataLogger. 16 ? Frequently Asked Question 1. I had connected the Sound Level Meter to PC serial port and turned the meter on, but it still shows NO CONNECTION. Answer: It could be that all serial port are occupied by other application, close all other application. If it

21、 still dont work. Restart your computer and run TestLink AK-73X again. 2. How can I save the graph to a file, which can be used in EXCEL? Answer: When you save a graph to a file, the default file format is *.ghf and you can select *.csv to save files. CSV is an EXCEL file format you can open in EXCE

22、L. 3. How to uninstall TestLink AK-73X? Answer: Uninstall TestLink AK-73X by launching the Add/Remove Programs applet out of the Control Panel, highlighting the AK-73X, and clicking on the Add/Remove icon, then it will remove the AK-73X folder and files from your computer. 4. Why would loading data

23、fail? Answer: This might be caused by the slow response from some of the notebook PC system. 5. How to zoom in on the graph? Answer: Press the left mouse button and drag the cursor to select the new extents, and then release the mouse button. 6. When I setup the real time sampling with a fast rate (

24、e.g. 0.1 sec), some of the sampling data might be missing. Answer: This might be caused by slow response time of the PC. 17 Limited One-Year Warranty B&K Precision Corp. warrants to the original purchaser that its products and the component parts thereof, will be free from defects in workmanship and

25、 materials for a period of one year from date of purchase. B&K Precision Corp. will, without charge, repair or replace, at its option, defective product or component parts. Returned product must be accompanied by proof of the purchase date in the form of a sales receipt. To obtain warranty coverage

26、in the U.S.A., this product must be registered by completing a warranty registration form on within fifteen (15) days of purchase. Exclusions: This warranty does not apply in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs. The warranty is void if th

27、e serial number is altered, defaced or removed. B&K Precision Corp. shall not be liable for any consequential damages, including without limitation damages resulting from loss of use. Some states do not allow limitations of incidental or consequential damages. So the above limitation or exclusion ma

28、y not apply to you. This warranty gives you specific rights and you may have other rights, which vary from state-to-state. B&K Precision Corp. 22820 Savi Ranch Parkway Yorba Linda, CA 92887 714-921-9095 18 Service Information Warranty Service: Please return the product in the original packaging with

29、 proof of purchase to the address below. Clearly state in writing the performance problem and return any leads, probes, connectors and accessories that you are using with the device. Non-Warranty Service: Return the product in the original packaging to the address below. Clearly state in writing the

30、 performance problem and return any leads, probes, connectors and accessories that you are using with the device. Customers not on open account must include payment in the form of a money order or credit card. For the most current repair charges please visit and click on “service/repair”. Return all

31、 merchandise to B&K Precision Corp. with pre-paid shipping. The flat-rate repair charge for Non-Warranty Service does not include return shipping. Return shipping to locations in North American is included for Warranty Service. For overnight shipments and non-North American shipping fees please contact B&K Precision Corp. B&K Precision Corp. 22820 Savi Ranch Parkway Yorba Linda, CA 92887 714-921-9095 Include with the returned instrument your complete return shipping address, contact name, phone number and description of problem.