Allen ICON+service+manual+AP3319_1电路图.pdf

《Allen ICON+service+manual+AP3319_1电路图.pdf》由会员分享，可在线阅读，更多相关《Allen ICON+service+manual+AP3319_1电路图.pdf（25页珍藏版）》请在收音机爱好者资料库上搜索。

1、 SERVICE MANUAL Publication: AP3319 RadioFans.CN 收音机爱 好者资料库 2 icon series CONTENTS Introduction, Service and Technical Support.3 The icon series & Options.4 Specifications and Connections.5 Opening up the DL1000 console .6 Opening up the DP1000 console.7 Removing the DL1000 Power Supply circuit boar

2、d assembly.8 Removing the DL1000 MIDI circuit board assembly.9 Removing the DP1000 Amplifier circuit board assembly.10 Removing the DP1000 Amplifier circuit board assembly continued.11 Removing the DP1000 Transformer and Transformer Mains wiring.12 Removing the DP1000 MIDI circuit board assembly.13

3、Removing the CPU circuit board assembly.14 Removing the LCD module.15 Removing the Audio circuit board assembly.16 Removing the Fader, Keypad circuit board assembly and Rubber Keypad .17 Ordering an icon console, options, manuals and support documentation.18 Ordering an Assembly.19 Ordering a Spares

4、 Kit .20-22 DL1000 Front & Rear Panel drawings.23 DP1000 Front & Rear Panel drawings.24 icon Block Diagram.25 DL1000 Power Supply Circuit Board component Ident.AG3446 DL1000 Power Supply Circuit Diagram .C3446 icon MIDI Circuit Board component Ident.AG3280 icon MIDI Circuit Diagram.C3280 DP1000 Ampl

5、ifier Circuit Board component Ident.AG3297 DP1000 Amplifier Circuit Diagram Pages 1 to 3.C3297 icon CPU Circuit Board component Ident.AG3292 icon CPU Circuit Diagram Pages 1 to 7.C3292 icon Audio Circuit Board component Ident.AG3293 icon Audio Circuit Diagram Pages 1 to 4 .C3293 icon Fader Circuit B

6、oard component Ident .AG3279 icon Fader Circuit Diagram .C3279 icon Keypad Circuit Board component Ident.AG3278 icon Keypad Circuit Diagram Pages 1 to 2 .C3278 DL1000 Mains Circuit Board component Ident.AG3298 DL1000 Mains Circuit Diagram.C3298 icon Service Manual AP3319 Issue 1. Copyright 1999 Alle

7、n & Heath. All rights reserved. MANUFACTURED IN ENGLAND BY: ALLEN & HEATH AGENT: ALLEN & HEATH Kernick Industrial Estate Penryn, Cornwall, TR10 9LU. UK http:/www.allen- Warning to the Service Engineer Allen & Heath warns that any unauthorised changes or modifications to the icon unit may invalidate

8、the legal compliance of the unit and could void the users authority to operate the equipment. RadioFans.CN 收音机爱 好者资料库 SCHEMATICS ? PUBLISHED ? SEPARATELY? ? PSU SCHEMATICS ? ONLY SHOWN IN ? SERVICE /DISTRIBUTOR ? VERSION icon series 3 Introduction The information presented in this section of the man

9、ual is intended for competent technical personnel to carry out service and product support for the icon series. We assume that the reader is familiar with the related electronic theory and audio terminology, and is able to carry out basic servicing, fault-finding and repair of digital audio equipmen

10、t of this type. Service personnel should also be familiar with audio systems, mains earthing and power requirements, as well as handling precautions. For information on the installation, operation and application of the icon series please refer to the User Guide. Whilst we believe the information in

11、 this manual to be reliable we do not assume responsibility for inaccuracies. We also reserve the right to make changes in the interest of further product development. Service and Technical Support Under normal operating conditions the icon does not require user maintenance or internal calibration.

12、Any service work required should be carried out by qualified technical personnel only. We are able to offer further product support through our world-wide distribution network. To help us provide an efficient service please quote the unit serial number, the date and place of purchase in any communic

13、ation regarding this product. SAFETY WARNING! Mains electricity is dangerous and can kill. Mains voltage is present within the console power supply unit. The internal power supply unit contains no serviceable components and must be replaced as a complete unit if a failure occurs. Do not remove the p

14、ower supply cover with mains electricity connected. To ensure your safety, mains earth is connected to the chassis through the power lead. Do not remove this mains earth connection. To avoid the risk of fire, replace the mains fuse only with the correct value and type as indicated on the power suppl

15、y unit. IMPORTANT STATIC ELECTRICITY PRECAUTIONS Many of the components in the icon are extremely sensitive to static electricity. The following procedures reduce the possibility of damaging components: 1) Before handling any components or touching anything inside the unit, discharge your bodys stat

16、ic electric charge by touching a grounded (earthed) surface. Wear a grounding wrist strap if one is available. 2) Do not remove parts from their antistatic containers or bags until you are ready to install them. When removing circuit boards (PCBs) or ICs from a unit, immediately place them in an ant

17、istatic bag. 3) When handling PCBs, hold them by their edges and avoid touching the circuitry. 4) Do not slide PCBs or ICs over any surface. 5) Avoid having plastic, vinyl and foam in your work area. 6) Limiting your movements during service work reduces static electricity. Replace the battery with

18、an Allen & Heath recommended part. Using a different battery, recharging or disassembling the battery may present a danger due to fire or explosion. Dispose of used batteries promptly according to the manufacturers instructions. Keep all batteries away from children. WARNING: There is danger of expl

19、osion if the battery is incorrectly replaced. RadioFans.CN 收音机爱 好者资料库 4 icon series The ICON Series Powered and Un-Powered Digital Live Consoles DL1000 10 Input Un-Powered Digital Live Mixing Console DP1000 10 Input Powered Digital Live Mixing Console Options DL1000-RK 19” Rack Mount Kit for both DL

20、1000 and DP1000 consoles AP3521 Icon Carry bag Flightcasing the console If the console is to be regularly moved we recommend that it is installed in a foam-lined flightcase. At all times avoid applying excessive force to any knobs or connectors. Do not obstruct the ventilation slots or position the

21、icon where the air-flow required for ventilation is impeded. Dimensions for flightcasing the console are shown below: (All dimensions in mm) MIC 48V 482 with rack ears fitted 442 355 164 21 10 373 355 73 34 35 8U rack 36 85 125 162 355 364 15 10 DL1000 DP1000 19 rack mounting option 9 kg 20 lbs 18 k

22、g 40 lbs DIMENSIONS Unpacked .Width DL1000 .442 (17”) DP1000.442 (17”) .Depth DL1000 .373 (15”) DP1000.364 (14”) .Height DL1000 .164 (6”) DP1000.162 (6”) .Weight (kg) DL1000 .9 (20lbs) DP1000.18 (40lbs) Packed .Width DL1000 .550 (22”) DP1000.550 (22”) .Depth DL1000 .505 (20”) DP1000.505 (20”) .Heigh

23、t DL1000 .300 (12”) DP1000.300 (12”) .Weight (kg) DL1000 .11 (24lbs) DP1000.20 (44lbs) icon series 5 Specifications 0 dBu = 0.775 Volts rms 0 dBV = 1 Volt rms HEADROOM:.+18dBu MAX OUTPUT:. JACK +18dBu 2kohm max load .LR (DL1000 ONLY) +22dBu 2kohm max load .PHONO +10dBu 2kohm max load METERS: A, B. p

24、eak reading 10 segment LED FREQUENCY RESPONSE referred to 1kHz 0dBu: Any input to any output. 20Hz to 20kHz +0/-1dB DISTORTION: THD+Noise +14dBu 1kHz Input to Output.80dB CROSSTALK: Referred to driven channel 1kHz Inter channel. -90dB NOISE: Measured rms 22Hz to 22kHz Mic input EIN (150 ohm source).

25、 30k ohms.variable 31 to +16dBu Stereo Ch Mic in. XLR.pin 2 hot, 3 cold balanced. 2k ohm.variable 55 to 8dBu Stereo Ch Line in. TRS jack .tip hot, ring cold, balanced. 30k ohms.variable 31 to +16dBu Stereo Ch Phono in. RCA PHONO .unbalanced. 30k ohms.variable 31 to +16dBu OUTPUTS: Aux and foldback o

26、ut .TRS jack.tip hot, ring cold, impedance balanced.75 ohm .0dBu A+B Slave out.TRS jack.tip hot, ring cold, impedance balanced.75 ohm .0dBu L&R out.TRS jack.tip hot, ring cold, impedance balanced.75 ohm .0dBu .or RCA PHONO.unbalanced.600 ohm .-10dBV Mono out.TRS jack.tip hot, ring cold, impedance ba

27、lanced.75 ohm .0dBu A&B out (DL1000 only) .XLR .pin 2 hot, 3 cold, balanced.75 ohm .0dBu Phones out .TRS jack.tip left, ring right.for stereo headphones 30 to 600 Ohms 6 icon series Opening up the DL1000 Console Before beginning any service work, remove all power to the unit and disconnect any signa

28、l cables where necessary. Adopt static electricity working procedures when carrying out service work. Ensure adequate lighting and use the correct tools. 1) Remove all 12 screws fixing the top panel onto the base retaining the 3 shake-proof washers from the rear screws. 2) Carefully lift the top pan

29、el away from the base as the top panel is connected via IDC harnesses. 3) Remove the 2 IDC Harnesses from the MIDI and Power Supply PCB respectively (see fig.1) 4) Remove the M3 nylock nut and earth wires (see fig.2) 5) Detach the front panel from the base. Note: When Audio testing the unit make sur

30、e that the front panel and base are fixed with a chassis screw at the rear of the console. IDC Harness connected to Power Supply PCB (Shown Detached) fig.1 IDC Harness connected to MIDI PCB fig.2 Earth Post, M3 nylock Nut and earth wires icon series 7 Opening up the DP1000 Console Before beginning a

31、ny service work, remove all power to the unit and disconnect any signal cables where necessary. Adopt static electricity working procedures when carrying out service work. Ensure adequate lighting and use the correct tools. 1) Remove all 12 screws fixing the top panel onto the base retaining the 3 s

32、hakeproof washers from the rear screws. 2) Carefully lift the top panel away from the base as the top panel is connected via IDC harnesses. 3) Remove the 2 IDC Harnesses from the MIDI and Amplifier PCB respectively (see fig. 3) 4) Remove the M3 nylock nut and earth wires (see fig.3) 5) Detach the fr

33、ont panel from the base. Note: When Audio testing the unit make sure that the front panel and base are fixed with a chassis screw at the rear of the console. fig.3 IDC Harness connected to MIDI PCB IDC Harness connected to Amplifier PCB (Shown Detached) Left Earth post, M3 Nylock Nut and earth wires

34、 Right Earth post 8 icon series Removing the Power Supply PCB (DL1000) Before beginning any service work, remove all power to the unit and disconnect any signal cables where necessary. Adopt static electricity working procedures when carrying out service work. Ensure adequate lighting and use the cor