EV_ND367s_Data_Sheet电路图.pdf

《EV_ND367s_Data_Sheet电路图.pdf》由会员分享，可在线阅读，更多相关《EV_ND367s_Data_Sheet电路图.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、Technical Specifications: The Electro-Voice N/D367s is a member of a family of microphones that are manufactured with refinements that enhance the sonic smoothness, improve gain-before-feedback and provide more consistent performance with greater durability than earlier generations of N/DYM micropho

2、nes. The controlled response of the N/D367s allows the user to easily work the microphone for optimal performance. The N/DYM magnet geometry used in the N/D367s, combined with a reinforced diaphragm design, creates a smooth, extended frequency response with a warm, open and transparent sound quality

3、. The N/DYM microphones feature EVs AcoustiDYMTM shock - mount system. This unique vibration isolating system works as a multistage device. At low frequencies, a rear sound wave cancels the diaphragm motion, while, at high frequencies, the specially designed rubber shock mount isolates the transduce

4、r from motion. Combining AcoustiDYMTM with the elastomeric Warm-GripTM handle and the windscreen bumper produces an advanced technology, vibration isolating system which dramatically reduces all forms of handling noise for the most demanding situations. The N/D367s has a cardioid polar pattern, prov

5、iding an enhanced front-area sensitivity and acoustic rejection directly behind the microphone, reducing feedback under live performance conditions. This is particularly useful with typical monitor speaker placement and high sound pressure (SPL) requirements. Additionally, the N/ D367ss polar patter

6、ns are unusually uniform with frequency, ensuring superior gain-before-feedback in live applications and superior isolation when used in the studio. The N/D367s pop filters unique design utilizes a specially processed AcoustifoamTM filter to minimize wind noise and vocal P-pops. This design makes th

7、e pop filter an integral part of the microphones removable front grille assembly, allowing easy cleaning for continued top performance. : tneme lEeru t c ur t stengamMYD/N c i manyD :eso lC,esnopseR.qerFzH000,22-zH03 : raF,esnopseR.qerFzH000,22-zH06 :nret taPra l oPd i o i draC t i uc r i CnepO, y t

8、 i v i t i sneS : z Hk1egat l oV l acsap/Vm0.3 :egnaR c i manyDBd441 :es i oNtuptuOtne l av i uqEdethg i ewABd41 ) l acsap20000.0=Bd0( : y t i ra l oPsesuacmgarhpa i dnoerusserpev i t i soP 3n i p. fer2n i pnoegat l ovev i t i sop :ecnadepmI)z-wo l (decna l absmho053 : ro t c ennoCenohpor c i Mep y

9、t RLXn i p3 :hs i n iFkca l bgn i t ce l fer -noN :dedu l cnIse i rosseccAretpadAdnatS c i M gaBg iGderepp iZt foS :htgneL , s no i snemiD : retema iD : k nahS )mm181(21.7 )mm25(50.2 )mm02(08.0 : thg i eWteN)g852(zo1.9 : thg i eWgn i pp i hS)g535(zo9.81 General Description: N/D367s N/DYM Dynamic Car

10、dioid Vocal Microphone Key Features: Classic N/DYM sound Smooth, controlled frequency response High N/DYM sensitivity Superior multistage shock mount and “Warm Grip” handle for unmatched low handling noise On/Off switch Also sounds great when used on a podium The N/D367s also features a noiseless on

11、/off switch, which is useful in giving the speaker/vocalist control of their signal to the mixer. RadioFans.CN 收音机爱 好者资料库 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 Telex Communications, Inc. 9/2003 Part Number 534569 Rev. D N/D367s Part Number: 301341-0

12、00 Polar Response:Frequency Response: Dimension Drawing: (5 dB per division) 1000 Hz 180 0 90270 30 60 120 150210 240 300 330 U.S.A. and Canada only. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Cu

13、stomer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/553-5992 or 402/467-5321 For tec

14、hnical assistance, contact Technical Support at: 800/392-3497 or 952/736-4656 Specifications subject to change without notice. Standard Placement & Use Guidelines 1. Always point the microphone at the desired source of sound, and away from any unwanted sources. 2.The microphone should be located clo

15、se to the sound source to minimize interference from other potential sound sources. 3. Use the 3-to-1 rule when using multiple microphones. Place each microphone three times farther from other microphones as from the desired sound source. 4. Minimize over-handling of the microphone to reduce unwante

16、d mechanical noise. 5.Working close to the microphone will increase the bass tone and also provide increased gain-before-feedback. Microphone Use and Placement Please note that micing techniques are a matter of personal preference. These are merely guidelines to assist in the placement of the microphone to gain optimal performance. UsageOptimal Placement VocalsZero to six inches from the windscreen, and on axis with the microphone. Spoken WordFive to ten inches from the windscreen, and on axis with the microphone. RadioFans.CN 收音机爱 好者资料库