Rolls HE18 Buzz Off Manual & Schematic 电路图.pdf

《Rolls HE18 Buzz Off Manual & Schematic 电路图.pdf》由会员分享，可在线阅读，更多相关《Rolls HE18 Buzz Off Manual & Schematic 电路图.pdf（1页珍藏版）》请在收音机爱好者资料库上搜索。

1、HE18 BUZZ OFF SCHEMATIC Rolls Corporation 1/05 INPUTOUTPUT BUZZ OFF INPUTOUTPUT MADE IN THE USA RIGHT LEFT R R L L INPUT OUTPUT RIGHT INPUT LEFT INPUT RIGHT OUTPUT LEFT OUTPUT BUZZ OFF MADE IN THE USA Removes buzz or hum caused by ground loops Requires no power Converts unbalanced signals to balance

2、d HE18 HE18 Buzz Off The HE18 helps remove hum and buzz from a balanced or unbalanced line. Perfect for musi- cians or audio professionals, the unit is safe and convenient to operate. Simply connect the offending line into the input, and connect the output to your next device. - Helps eliminate grou

3、nd hum and buzz - Dual channel - No power required - completely passive - Converts balanced to unbalanced lines and vice versa INTRODUCTION Thank you for your purchase of the HE18 Buzz Off. If youve got hum or buzz in your audio signal, the HE18 is the solution you need. Almost all AC hum is caused

4、by ground loops. These ground loops act like radio antennae, picking up hum and noise. The HE18 removes many causes of noise by eliminating the ground potential. INSPECTION 1. Unpack and Inspect the HE18 package Your HE18 was carefully packed at the factory in a protective carton. Nonetheless, be su

5、re to examine the unit and the carton for any signs of damage that may have occurred during shipping. If obvious physical damage is noticed, contact the carrier immediately to make a damage claim. We suggest saving the shipping carton and packing materials for safely transporting the unit in the fut

6、ure. WARRANTY For information on the Rolls One Year Limited Warranty, and to register this product, visit our website at DESCRIPTION INPUT(S): 2 ea; 1/4” Tip-Ring-Sleeve jacks 2 ea; RCA jacks OUTPUT(S): 2 ea; 1/4” Tip-Ring-Sleeve jacks 2 ea; RCA jacks OPERATION To insert the HE18 in a system with a

7、buzz or hum, discon- nect the device you suspect is causing the noise. Connect that devices Output to either of the Inputs (1/4” or RCA), and connect the HE18 Output(s) to the next device in the signal chain. For example; if youve got a buzz in your video system, con- nect the HE18 between the video

8、 unit and amplifier to isolate the signals. PLEASE NOTE: THE HE18 IS INTENDED TO RECEIVE LINE LEVEL (0db to +4 dB) SIGNALS. DO NOT CONNECT A MICROPHONE LEVEL SIGNAL OR A SPEAKER (POW- ERED) LEVEL SIGNAL TO THIS UNIT. CONNECTING A SPEAKER LEVEL SIGNAL (ie. THE OUTPUT OF A POWER AMPLIFIER) WILL CAUSE

9、PER- MANENT DAMAGE TO THE HE18. DIAGRAM Max Out: Bal: +18 dB Unbal: +12 dB Max In: Bal: +22 dB Unbal: +22 dB Input Impedance: RCA: 10 k Ohm 1/4”: 10 k Ohm balanced Output Impedance: RCA: 10 k Ohm 1/4”: 10 k Ohm balanced THD: .05% 1 kHz Weight: 1 lbs. (.45 Kg) Size: 4.15” x 2.46” x 1.55” INPUTOUTPUT BUZZ OFF INPUTOUTPUT MADE IN THE USA RIGHT LEFT R R L L INPUT OUTPUT RIGHT INPUT LEFT INPUT RIGHT OUTPUT LEFT OUTPUT BUZZ OFF MADE IN THE USA Removes buzz or hum caused by ground loops Requires no power Converts unbalanced signals to balanced HE18 RadioFans.CN 收音机爱 好者资料库