Adlab ADD22MP DJ UM HW IO Board 电路图.pdf

《Adlab ADD22MP DJ UM HW IO Board 电路图.pdf》由会员分享，可在线阅读，更多相关《Adlab ADD22MP DJ UM HW IO Board 电路图.pdf（4页珍藏版）》请在收音机爱好者资料库上搜索。

1、ADD22MP DJ 2in/2out 1 DJ Hardware Control User Manual 1. Connect the Demo Board Connect the module to demo board ADDxDB, then link the power (outside: negative, inside: positive) and the audio I/O connect hardware panel by hardware bus, do not connect USB cable, release USB switch button: RadioFans.

2、CN 收音机爱 好者资料库 2 2. Module Installation The module pin is aligned with the right 2 * 13pin: 3. Operate Hardware Control Panel RadioFans.CN 收音机爱 好者资料库 3 4. Demo Board Function There are 2 encoders + 10 switches from left to right: - Effects Encoder Switch 16 sound effects. - Parameter Encoder Adjust t

3、he effect parameter range 0127. - Parameter Encoder Switch Switch parameters 1/2. - BPM Switch*7 In the BPM linked condition(one of the 7 LED lights will be turn on), select the sub-beat time. - Bypass Switch Start the effect control. - TAP Switch Click: In the BPM linked condition( one of the 7 LED

4、 lights will be on), double-click for input time. Press: Switch BPM detect Manual/Auto. When operation is stopped, the panel will display the current BPM value. 4 5. Effect List Effect name Parameter 1 Parameter 2 Beat Divide function 1 Delay Delay Time Dry/Wet Level Yes 2 Echo Delay Time Dry/Wet Le

5、vel Yes 3 Reverb Reverb Time Dry/Wet Level 4 Auto Filter (BP) Rate Depth Yes 5 Manual Filter (BP) Cutoff Freq. Resonance 6 Auto Filter (HP) Rate Depth Yes 7 Manual Filter(HP) Cutoff Freq. Resonance 8 Auto Filter(LP) Rate Depth Yes 9 Manual Filter(LP) Cutoff Freq. Resonance 10 Phaser Rate Depth Yes 11 Flanger Rate Depth Yes 12 Auto Pan Rate Depth Yes 13 Vocal Cancel Central Cut Freq Width 14 Vocoder Carrier Freq Dry/Wet Level 15 Ring Modulator OSC Freq Dry/Wet Level 16 Pitch shifter Pitch Tone Dry/Wet Level