BDP1 OM 电路图.pdf

《BDP1 OM 电路图.pdf》由会员分享，可在线阅读，更多相关《BDP1 OM 电路图.pdf（12页珍藏版）》请在收音机爱好者资料库上搜索。

1、 BDP -1 OWNERS MANUAL RadioFans.CN 收音机爱 好者资料库 IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage “ within the products enclosure that may be of sufficient magnitude t

2、o constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. 1. Read these instructions. 2. Keep these i

3、nstructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat r

4、egisters, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade

5、or the third prong are provided for your safety. If the pro- vided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they ex

6、it from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used use caution when moving the cart/apparatus combination to avoid injur

7、y from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spi

8、lled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPL

9、ASHING AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ARE PLACED ON THE EQUIPMENT. TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE. BRYSTON L

10、IMITED WARRANTY Bryston analog audio products are warranted to be free from manufacturing defects for twenty (20) years from the original date of manufacture. The warranty includes parts and labour. Bryston Digital products and cables are warranted for five years from the original date of manufactur

11、e. The warranty includes parts and labour. Bryston products having motorized moving parts, excluding motorized volume controls, are warranted for three years from the original date of manu- facture. The warranty includes parts and labour. Bryston will remedy the problem by repair or replacement, as

12、we deem necessary, to restore the product to full performance. Bryston will pay return shipping costs for the full length of the specific products warranty. In the event of a defect or malfunction, contact Brystons repair centers for return authorization. Products must be returned using original pac

13、kaging material only. Packing material may be purchased from Bryston if necessary. This warranty is considered void if the defect, malfunction or failure of the product or any component part was caused by damage (not resulting from a defect or malfunction) or abuse while in the possession of the cus

14、tomer. Tampering by persons other than factory authorized service personnel or failure to fully comply with Bryston operating instructions voids the warranty. This warranty gives you specific legal rights and you may also have other rights which may vary from province to province and country to coun

15、try. As of 2006-02-22 Bryston will only warranty Bryston products purchased through authorized Bryston dealers. Bryston products with a date code of 0608 or higher (date code format is “yyww”, where “yy” is the two least significant digits of the year and “ww” is the week of the year) must be accomp

16、anied by a copy of the bill-of-sale from a Bryston authorized dealer to qualify for warranty service. The warranty is transferable from the original owner to a subsequent owner as long as a copy of the bill-of-sale from the original authorized Bryston dealer accompanies the re-sale. The copy of the

17、bill of sale to any subsequent owner need ONLY include the Name of the Bryston Authorized Dealer and the Model and Serial number of the Bryston product The warranty will only be honored in the country of the original purchase unless otherwise pre-authorized by Bryston. Postal address: P .O. BOX 2170

18、, Stn. Main PETERBOROUGH, ONTARIO CANADA K9J 7Y4 Courier address: 677 NEAL DRIVE PETERBOROUGH, ONTARIO CANADA K9J 6X7 PHONE: 705-742-5325 FAX: 705-742-0882 E-mail: 79 COVENTRY ST., Suite 5 NEWPORT, VERMONT U.S.A. 05855-2100 PHONE: 802-334-1201 FAX: 802-334-6658 E-mail: BRYSTON SERVICE in CANADA:BRYS

19、TON SERVICE in the USA: contact your local distributor or CHECK OUR WEB SITE: E-MAIL BRYSTON DIRECTLY: FAX BRYSTON DIRECTLY: 01-705-742-0882 PHONE BRYSTON DIRECTLY: 01-705-742-5325 BRYSTON SERVICE outside Canada and the USA: RadioFans.CN 收音机爱 好者资料库 TABLE of CONTENTS Safety Instructions, Warranty and

20、 Contact Information . .Opposite General Information. .Page 1 Description Features .Network.vs.Local.Control .Optional.BR2.Remote.Control .Power.Considerations .Fuses.and.Electrical.Safety. .Page 2 .Firmware.Updates .Hard.Wired.Remote.Power.ON/OFF.Control.(Trigger.In/Out) .Display.Brightness.and.Aut

21、o.Shut-Off.Time.Delay .Front Panel .Page 3 .USB.Inputs .Infra-Red.Sensor .Dot.Matrix.Display .File./.Folder.Navigation.Keys .Function.Keys .Power.Switch.and.LED.Indicator .Rear Panel .Page 4 .RS232.Port .USB.Inputs .Ethernet.Port .SPDIF.Output .AES/EBU.Output .Trigger.In/Out.(Remote.Power.On/Off.Con

22、trol) .Data.Plate .Mains.Power.Inlet System Configurations.Page 5 Minimal.Configuration .Expanded.Configuration .Hard.Disc.Drives .Application.Software .Minimal.Configuration.Illustration .Playlists .Page 6 Expanded.Configuration.Illustration .Operational Notes.Page 7 Setup Quick Start .BDP-1.Setup.

23、for.use.with.iPod.Touch/iPhone.or.SmartPhone .BDP-1.Setup.for.use.with.Home.Networked.Computer.Page 8 Glossary. .Back Page BDP-1 DIGITAL PLAYER GENERAL DESCRIPTION The Bryston BDP-1 is a state-of-the-art digital music player that can play back most high resolution digi- tal music formats including A

24、IFF, FLAC these keys function in essentially the same manner here as they would on a CD player like the BCD-1 POWER SWITCH two on the front panel and two on the rear panel. When connecting port powered USB hard disc drives, use the rear USB inputs. Use the front USB jacks for lower power USB devices

25、 like flash drives. All USB ports are USB-2 but are USB-1 compatible. All are USB ports are type A receptacles ETHERNET Port: a CAT-5 (or CAT-5e or CAT-6) connection using an 8P8C (RJ45) connector to interface with a home computer network to fa- cilitate remote control of the BDP-1 via personal comp

26、uters and other networked devices like iPhone/iPad Touch/iPad, SmartPhones running Android, etc. SPDIF Output (75 Ohm BNC connector): A Sony/ Philips Digital Interface output port for connec- tion to an outboard digital-to-analog converter like Brystons BDA-1 AES/EBU Output (3 pin XLR male connector

27、) An AES/EBU output port for connection to an outboard digital-to-analog converter like Brystons BDA-1 REMOTE POWER ON/OFF TRIGGER CONTROL: The BDP-1 is equipped with two 3.5mm two con- ductor phone jacks for implementing a remote power On/Off function. Supplying a DC control voltage between 3 and 1

28、2 volts (at greater than or equal to approximately 1mA) to the Trigger IN port will allow you to remotely power your BDP-1 on or off. Whatever control voltage is applied to the IN port will be routed to the OUT connector, via an isolated relay, after the BDP-1 has fully powered up. This OUT port can

29、 then be used to control other devices that are similarly equipped. The the Remote Trigger input takes precedence over the front panel push-button switch and as long as a valid control voltage is present at the BDP-1s Trigger IN port the unit cannot be powered Off. DATA PLATE: This label provides th

30、e units exact model number, serial number, electrical rating and date of manufacture. Do not remove. IEC Power Inlet: The IEC-320 C14 power in- let accepts IEC-320 C13 equipped power cords. Use only appropriate power cords that have been approved for your region. BDP-1 DIGITAL PLAYER SYSTEM CONFIGUR

31、ATIONS: MINIMAL SYSTEM CONFIGURATION The MINIMAL SYSTEM CONFIGURATION (shown below) requires only a BDP-1, a BDA-1 digital-to- analog converter, a Flash Drive, interconnect cables and, of course, a sound system. The BDP-1 can operate as the hub of a completely independent (i.e. free of any computer

32、network) high fidelity digital music system. In this minimal configuration the front panel folder/file navigation keys are used to select the files that are played. EXPANDED SYSTEM CONFIGURATION The EXPANDED SYSTEM CONFIGURATION shown on the opposite page, includes a wide range of remote control opt

33、ions. The only thing that is not shown is the Remote Trigger (power on/off control) hookup. Besides the BR2 infra-red remote control, which is essentially a LOCAL control option since it requires a line-of-sight between the remote and the BDP-1, all other remote control methods are NETWORK control o

34、ptions. Whether it is a personal computer running the Firefox web browsers Minion add-on application, or an iPod Touch running the mPod application, or Brystons MINI and/or MAX web apps, all NETWORK control methods require a hard wired Ethernet connection between the networks router and the BDP-1 Th

35、e iPod Touch, running the mPod application, utilizes the iPod Touchs Wifi connectivity to inter- face with the personal computer network via the network router, which must be a WiFi router in this instance. USB HARD DISC DRIVES USB hard disc drives that are powered from the USB port itself should be

36、 connected to the rear USB ports which are capable of supplying the increased power required. USB hard disk drives that are pow- ered form a separate power supply can be connect- ed to any USB port on either the front or rear of the BDP-1. APPLICATION SOFTWARE The Bryston-MINI and Bryston-MAX web ap

37、ps that are built in to the BDP-1 provide the easiest way of remotely controlling the BDP-1 from either a personal computer (Bryston-MAX) or SmartPhone or iPod Touch or iPad. In both cases the internal pro- grams are utilized by simply connecting the BDP-1 to a personal computer network, launching t

38、he computer or SmartPhones web browser and enter- ing the address bryston-bdp-1.local The MINI version of the Bryston web app is intended for por- table devices like the iPod Touch with small screens (requires iOS 3.1.2, iOS 4.0.1, Android 1.5 or Android 2.2). The MAX version is intended for the ful

39、l size displays of laptop and desktop computers. You can create your own PLAYLISTS by adding single songs or multiple songs to the existing playl- ist and touching or clicking “Save Playlist” in the menu bar. Name the Playlist and it will now show up in the menu bar on the interface. MINIMAL SYSTEM

40、CONFIGURATION BDP-1 DIGITAL PLAYER To recall a specific playlist simply touch or click on the saved playlist name and it will load the play- list. To delete the Playlist click on Playlist in the menu bar and then hit Delete in the right hand colum of the interface Other application software options:

41、 MUSIC PLAYER MINION, an add-on to the FIREFOX web browser, can be used to remotely control the playing of music files that are located on USB data storage devices connected directly to the BDP-1. Minion is available free off charge (as is Firefox) by first installing Firefox and then, from the top

42、menu bar, selecting TOOLS ADD-ONS and searching for “Minion” in the Search for Add-Ons dialog box. Within Minion, select the TOOLS icon and then “Manage Servers” and add “bryston-bdp-1.local” to make the BDP-1 available as a server. MPoD is an iPhone/iPod Touch app available free of charge from Appl

43、e (at ). This is a music player daemon (MPD) controller that allows for remote control of the BDP-1 from an iPod Touch (iPod Touch) or iPhone in a fashion similar to Minion on Firefox. Both MPoD and Minion utilize an MPD (music player daemon) within the BDP-1 running on a stripped down Linux OS. And

44、 in both applica- tions it is necessary to setup an MPD server name (bryston-bdp-1.local). See Operational Notes for more information. EXPANDED SYSTEM CONFIGURATION OPERATIONAL NOTES LOCAL operation using the front panel controls: The initial startup of the BDP-1 can take up to 2 minutes as the buil

45、t-in firmware is loaded from the internal Compact Flash memory. When any USB storage device (hard disc or flash drive) is first plugged in to the BDP-1 its contents will be scanned by the BDP-1 and an on-the-fly playlist will be constructed. This playlist will con- sist of only those file types that

46、 the BDP-1 can play (AIFF, FLAC, WAV, MP3, M4A see MPD in the glossary for a more complete list). The more files are on the USB storage device, the longer the scan and build process will take. A large hard disc drive with several thousand songs could take up to a few minutes to be processed. As this

47、 scan and build process is initiated the mes- sage “UPDATING.” will be temporarily displayed on the front panel dot matrix display. When multiple USB storage devices are plugged into the BDP-1 the top level of the navigation menu will be USB. Specific USB devices are listed beneath, then folders with each device and finally individual file names: In the illustration at the right, 4 USB devices (2 flash drives and 2 hard disc drives) are connected to the BDP-1. As an example, if you wanted to play the 2nd song on the 2nd album folder on the Kingston flas