R-control 电路图.pdf

《R-control 电路图.pdf》由会员分享，可在线阅读，更多相关《R-control 电路图.pdf（4页珍藏版）》请在收音机爱好者资料库上搜索。

1、 Remote System Supervision Network R-Control Real-world monitoring and control from the engineers of Renkus-Heinz R-Control is the standards-based network solution that puts you in control of an entire Renkus-Heinz system. Monitor driver impedance and Loudspeaker Specific Processing in real time. Sc

2、hedule and supervise critical amplifier functions. All with the network topologies, groups and zones you define. If youve tried working with networks, youll like how R-Control works with you. Easy to Learn, Simple to Operate Intuitive Windows user interface Multiple screens give you the functions yo

3、u need to use at any level of detail you need, from a single amplifier to the entire network Easy to Install You define the network topology You define 100 amplifier groups/zones* 64 amplifiers without routers; 225 amplifiers using readily available Echelon LonWorks* routers Unique ID number for eac

4、h Renkus-Heinz amplifier; no DIP switches Free topology networks up to 500m (1640 ft), doubly terminated bus length of 2700m ( ( ( ( ( 1.7 miles) without routers The Power of Standards Based on proven technologies with global support and multiple hardware sources, including Echelon LonWorks (in use

5、worldwide for building control) and Microsoft Windows 95/98/NT Total System Supervision Power On/Off with sequencing for amplifier groups Event Scheduler Channel level controls Solo function Individual channel polarity inversion Real-time load monitoring Power status Input Doubly-Terminated Bus avai

6、lable IBM or 100% compatible Pentium PC Windows 95/98/NT 32 MB minimum 50 MB minimum 300 MHz minimum R-H System Specific power amplifiers with R-Control Network Card; PCLTA-10 PC Lonwork PC Interface card PLATFORM: TYPE: DATA RATE: TRANSCEIVER: CAPACITY: MAXIMUM # OF POINTS: MAXIMUM # OF GROUPS: Dif

7、ferential Manchester encoding; polarity insensitive, free topology standard, doubly terminated bus to- pology available. 78 Kb/s on standard systems; higher rates available. EMI: complies with FCC Part 15, Class A; UL recognized; VDE: EMI compliant. 64 on standard system, expandable in 64 point step

8、s with routers up to 225 total; larger systems available. 100 in standard system, larger sys- tems available The system shall have an Echelon based network platform that is fully compatible with Lonworks networks. The network shall be polarity insensitive and not affected by the loss of power. Netwo

9、rk failure shall not affect either individual amplifier or overall system operation. The program shall have a Data Transmission Rate of at least 78 Kb/s and comply with FCC Part 15, Class A for EMI compliant devices. It shall be a 32-bit program developed to run under Windows 95 /98/NT on Pentium PC

10、s having at least 32 MB of RAM and a clock speed of at least 300 MHz. Cable Belden 85102, 16 ga, stranded twisted pair Belden 8205, 20 ga, stranded twisted pair Level IV, 22 ga, solid twisted pair TIA568A Category 5, 24 ga, solid twisted pair Free Topology Max Amp-to-Amp Length (Meters/Feet) Free Topology Max Bus Length (Meters/Feet) Doubly-Terminated Bus Topology Max Bus Length 500 m / 1640 Ft 400 m / 1310 Ft 400 m / 1310 Ft 250 m / 820 Ft 500 m / 1640 Ft 500 m / 1640 Ft 500 m / 1640 Ft 450 m / 1475 Ft 2700 m / 8850 Ft 2700 m / 8850 Ft 1400 m / 4590 Ft 900 m / 2950 Ft