Aiwa-AMHX50-md-siGA0011E0 电路图 维修手册.pdf

《Aiwa-AMHX50-md-siGA0011E0 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Aiwa-AMHX50-md-siGA0011E0 电路图 维修手册.pdf（1页珍藏版）》请在收音机爱好者资料库上搜索。

1、1/1 Service Technical Information MODEL NO. AM HX50 / HX55 SUBJECT Come off screw of HP JACKREF.No.:GA0011E0 DATE:27. APR. 2000 For the above mentioned products, the screw holding the HP JACK are occasionally lost. When this screw dislocate, it attach to the spindle motor or to the magnets of the PI

2、CK UP, causing possible NO PLAY. Complete the following procedures when the screw is missing. And also complete the following procedures when the screw is taking out during repair. Replace the screw holding the HP JACK with the Parts Code listed below and glue it on. Use glue No. 1600B(No.1620B). 1.

3、 Dont fasten too tightly the screw to fix the HP JACK. (1)Be sure that the screw dont protrude from the chassis. (2)Be sure that stress is not applied to the HP JACK. 2.Dont get glue on the sled motor or gears. Ref.Parts CodeDescriptionRemarks 8A HM3 233 010S SCREW,+1.4 3.5 N GRCode No.Access CodeModified Ser. No.Parts Schedule S-SCREW+1.4-3.5 GLUE HP JACK SLED MOTOR CHAS ASSY RadioFans.CN 收音机爱 好者资料库