Aiwa-LCX170-cs-sup 电路图 维修手册.pdf

《Aiwa-LCX170-cs-sup 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Aiwa-LCX170-cs-sup 电路图 维修手册.pdf（3页珍藏版）》请在收音机爱好者资料库上搜索。

1、BASIC TAPE MECHANISM : TN21ZSC-1653 BASIC CD MECHANISM : KSM-2131 BDM COMPACT DISC STEREO SYSTEM LCX-K170 S/M Code No. 09-993-324-7S1 HRJ(ST) SERVICE MANUAL SUPPLEMENT This service manual contains information only on the SPEAKER of LCX-K170. For more information, please refer to the following servic

2、e manuals. LCX-K170 HRJ(ST) (S/M Code No. 09-993-324-7R1). DATA RadioFans.CN 收音机爱 好者资料库 2 SPEAKER DISASSEMBLY INSTRUCTIONS Insert a flat-bladed screwdriver into the position indicated by the arrows and remove the panel. Remove the screws of each speaker unit andthen remove the speaker units. Remove

3、the grill frame and four pieces of rubber caps by pulling out with a flat-bladed screwdriver. Remove the screws from hold where installed rubber caps. Insert a flat-bladed screwdriver into the position indicated by the arrows and remove the panel. Re- move the screws of each speaker unit and then re

4、move the speaker units. Insert a flat-bladed screwdriver into the position indicated by the arrows and remove the panel. Turn the speaker unit to counter- clockwise direction while inserting a flat-bladed screwdriver into one of the hollows arround speaker unit, and then remove the speaker unit. Aft

5、er replacing the speaker unit, install it turnning to clock- wise direction unitil click sound comes out. Type.1 Type.3 Type.2 TOOLS 1Plastic head hammer 2(-) flat head screwdriver 3Cut chisel How to Remove the PANEL, FR 1.Insert the (-) flat head screwdriver tip into the gap between the PANEL, FR a

6、nd the PANEL, SPKR. Tap the head of the (-) flat head screwdriver with the plastic hammer head, and create the clearance as shown in Fig-1. 2.Insert the cut chisel in the clearance, and tap the head of the cut chisel with plastic hammer as shown in Fig-2, to remove the PANEL, FR. 3.Place the speaker

7、 horizontally. Tap head of the cut chisel with plastic hammer as shown in Fig-3, and remove the PANEL, FR completely. Type.4 Fig-1Fig-2 Fig-3 How to Attach the PANEL, FR Attach the PANEL, FR to the PANEL, SPKR. Tap the four corners of the PANEL, FR with the plastic hammer to fit the PANEL, FR into t

8、he PANEL, SPKR completely. 1? 2?3 RadioFans.CN 收音机爱 好者资料库 931196 Printed in Singapore 211, IKENOHATA 1CHOME, TAITO-KU, TOKYO 110-8710, JAPAN TEL:03 (3827) 3111 SPEAKER PARTS LIST REF. NOPART NO.KANRIDESCRIPTION NO. 1 88-CG6-009-010 CABI,FR SPKR 2 88-CL5-764-010 CORD,SPEAKER 3 88-CL6-020-010 SPKR, CLOTH BKT 4 88-CL6-030-010 SPKR, CLOTH SHEET 5 88-CL6-619-010 SPKR,10 4OHM 8CL6 RadioFans.CN 收音机爱 好者资料库