《JVC-XLR5010BK-cd-sm 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《JVC-XLR5010BK-cd-sm 电路图 维修手册.pdf（81页珍藏版）》请在收音机爱好者资料库上搜索。
1、ERRATA INCORRECTCORRECT If the power cord is unplugged from the wall socket for more than an hour, the internal clock, program, etc. of the main unit may require resetting. When this occurs, please set the clock (and timer functions) again. If the power cord is unplugged from the wall socket for mor
2、e than a few seconds, the internal clock, program, etc. of the main unit may require resetting. When this occurs, please set the clock (and timer functions) again. 1Load CDs into the trays of the 3-CD changer. Only tracks on the CDs loaded in the 3-CD changer can be reg- istered into the program (i.
3、e., tracks on a CD loaded in the CDR cannot be selected for playback). “CD READ DISC” will be shown in the information display as the unit reads the information from each disc. 1Load CDs into the trays of the 3-CD changer. Only tracks on the CDs loaded in the 3-CD changer can be reg- istered into th
4、e program (i.e., tracks on a CD loaded in the CDR cannot be selected for playback). “CD READ DISC” will be shown in the information display as the unit reads the information from each disc. Note To close a tray, press the 0 button for the tray number that is open. If you press the 0 button for a tra
5、y number other than that for the tray that is open, the program may not be played correctly. 1Load CDs into the trays of the 3-CD changer. Only tracks on the CDs loaded in the 3-CD changer can be reg- istered into the program (i.e., tracks on a CD loaded in the CDR cannot be selected for playback).
6、“CD READ DISC” will be shown in the information display as the unit reads the information from each disc. 1Load CDs into the trays of the 3-CD changer. Only tracks on the CDs loaded in the 3-CD changer can be reg- istered into the program (i.e., tracks on a CD loaded in the CDR cannot be selected fo
7、r playback). “CD READ DISC” will be shown in the information display as the unit reads the information from each disc. Note To close a tray, press the 0 button for the tray number that is open. If you press the 0 button for a tray number other than that for the tray that is open, the program may not
8、 be played correctly. 1Load CDs in the 3-CD changer 1Load CDs in the 3-CD changer Note To close a tray, press the 0 button for the tray number that is open. If you press the 0 button for a tray number other than that for the tray that is open, the program may not be played correctly. Turning the Pow
9、er On and Standby Mode Programming Playback Using Main Unit Controls Programming Playback Using the Remote Control Program Edit Recording Page 10 Page 18 Page 27 There were some errors in the instruction manual. We apologize for this and correct them as follows. Page 17 Errata sheetA4.fm Page 1 Wedn
10、esday, May 9, 2001 9:47 PM RadioFans.CN 收音机爱 好者资料库 ERRATA INCORRECTCORRECT 4Turn the MULTI JOG control or press the 2/3 (menu) button on the remote control to select “HIGH” or “1x”. If “HIGH” is selected, “HIGH” flashes in the display window. Press the CANCEL button (main unit/remote control) to can
11、cel the procedure and return to the normal display. 4Turn the MULTI JOG control or press the 2/3 (menu) button on the remote control to select “HIGH” or “1x”. If “HIGH” is selected, “HIGH” flashes in the display window. Press the CANCEL button (main unit/remote control) to cancel the procedure and r
12、eturn to the normal display. 5Press the SET button. 4Turn the MULTI JOG control or press the 23 (menu) button on the remote control and choose the setting “TR SPACE ON” or “TR SPACE OFF”. Press the CANCEL button (main unit/remote control) to cancel the procedure and return to the normal display. 4Tu
13、rn the MULTI JOG control or press the 23 (menu) button on the remote control and choose the setting “TR SPACE ON” or “TR SPACE OFF”. Press the CANCEL button (main unit/remote control) to cancel the procedure and return to the normal display. 5Press the SET button. Set the timer immediately after tur
14、ning on the power to the main unit for the first time. Additionally, should there be a power black- out that lasts for longer than one hour, or if the AC power cord of the unit is unplugged from the wall socket for longer than one hour, please check to see if the clock needs to be reset again before
15、 using any other operation. Set the timer immediately after turning on the power to the main unit for the first time. Additionally, should there be a power black- out that lasts for longer than a few seconds, or if the AC power cord of the unit is unplugged from the wall socket for longer than a few
16、 seconds, please check to see if the clock needs to be reset again before using any other operation. 5Press the SET button. DAILY TIMER is shown in the information window. To set DAILY TIMERProceed to step 5. To set ONCE TIMERPress the MENU button and display ONCE TIMER, and then proceed to step 5.
17、5Press the SET button. DAILY TIMER is shown in the information window. To set DAILY TIMERProceed to step 6. To set ONCE TIMERPress the MENU button and display ONCE TIMER, and then proceed to step 6. Setting the Unit for High-speed Recording Setting the Auto Track Spacing Function Setting the Present
18、 Time Timer Play (wake-up play) LE40829-001A Page 29 Page 30 Page 40 There were some errors in the instruction manual. We apologize for this and correct them as follows. Page 38 Errata sheetA4.fm Page 2 Wednesday, May 9, 2001 9:47 PM RadioFans.CN 收音机爱 好者资料库 For Customer Use: Model No. Serial No. Ent
19、er below the Model No. and Serial No. which are located on the rear, bottom or side of the cabinet. Retain this information for future reference. STANDBY/ON CD1CD2CD3 CD REC PLAY MODE REC REC MUTING REC SOURCE MENU PITCH 0 CHANCEL REPEATCD PITCH+ SET PITCH RMSXLR5010A REMOTE CONTROL CDR CD EDITFINAL
20、IZEDISPLAY 12 45 78 3 6 9 10 +10 FADESYNCHRO CONTROL STANDBY STANDBY/ON PLAY leave all ser- vicing to qualitied service personnel. 1. PRODUIT LASER CLASSE 1 2. ATTENTION: Radiation laser invisible quand lappareil est ouvert ou que le verrouillage est en panne ou dsactiv. Eviter une exposition direct
21、e au rayon. 3. ATTENTION: Ne pas ouvrir le couvercle du dessus. Ilny a aucune pice utilisable lintrier. Laisser un personnel qualifi le soin de rparer votre appar- eil. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appl
22、iance to rain or moisture. ATTENTION Afin dviter tout risque dlectrocution, dlncendie. etc.: 1. Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret de lappareil. 2. Ne pas exposer lappareil la pluie ni lhumidit. Caution STANDBY/ON % BUTTON! Disconnect the mains plug to shut the power
23、off com- pletely. The STANDBY/ON % button in any position does not disconnect the mains line. The power can be remote controlled. Attention Commutateur STANDBY/ON %! Dconnecter la fiche de secteur pour couper complte- ment le courant. Le commutateur STANDBY/ON % ne coupe jamais compltement la ligne
24、de secteur, quelle que soit sa position. Le courant peut tre tlcom- mand. For Canada/pour le Canada CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. PRECAUTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRE
25、SPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND. For Canada/pour le Canada THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPA- RATUS AS SET OUT IN THE INTERFERENCE-CAUSING EQUIP- MENT STANDARD ENTITLED “DIGITAL APPARATUS,” ICES-003 OF THE DEPARTMENT O
26、F COMMUNICATIONS. CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE BRUITS RADIOELECTRIQUES APPLICABLES AUX APPAREILS NUMERIQUES DE CLASSE B PRESCRITES DANS LA NORME SUR LE MATERIEL BROUILLEUR: “APPAREILS NUMERIQUES”, NMB-003 EDICTEE PAR LE MINISTRE DES COMMUNICATIONS. XL-R5010BK.book Page 2 Monday, Ju
27、ne 4, 2001 11:40 AM G-3 Caution: Proper Ventilation To avoide risk of electric shock and fire and to protect from damage, position the main unit as follows: Front:Open space with no obstructions. Sides:At least 3cm of space on each side. Top:At least 5cm of space between the top of the unit and the
28、nearest object. Back:At least 15cm of space between the back panel and the nearest object/wall. Bottom:Place the unit on a flat, level surface with no obstructions. In addition, maintain the best possible air circulation as illustrated. Attention: Ventilation Correcte Pour viter les chocs lectriques
29、, lincendie et tout autre dgt. Disposer lappareil en tenant compte des impratifs suivants Avant:Rien ne doit gner le dgagement Flancs:Laisser 3 cm de dgagement latral Dessus:Laisser 5 cm de dgagement suprieur Arrire:Laisser 15 cm de dgagement arrire Dessous:Rien ne doit obstruer par dessous; poser l
30、appareil sur une surface plate. Veiller galement ce que lair circule le mieux possible comme illustr. Spacing 15 cm or more Dgagement de 15 cm ou plus Wall or other objects Mur, ou obstruction Front Avant Stand height 15 cm or more Hauteur du socle: 15 cm ou plus XL-R5010BK Floor Plancher XL-R5010BK
31、.book Page 3 Monday, June 4, 2001 11:40 AM 1 English English Table of Contents Introduction .1 Precautions.2 Features .2 Connections.3 Analog Connections.3 Digital Connections.4 Components.5 Main Unit.5 Display Window.7 Using the Remote Control.8 Remote Control.8 Inserting the Batteries .9 Using the
32、 Remote Control.9 Power STANDBY/ON Operations.10 Turning the Power On and Standby Mode.10 Listening to CDs.11 3-CD Changer Continuous Playback.11 CDR Playback Operations .12 Using the Remote Control to Control Playback.13 Direct Playback of a Specific Track.14 Forward and Reverse Search.14 Skipping
33、Tracks .15 Repeat Playback.15 Random Playback.16 CD Playback Pitch Control.16 Disc Lock Function.16 Programming Playback Using Main Unit Controls.17 Programming Playback Using the Remote Control.18 Recording onto CD-R/RW Discs.20 Add Finalize Feature.20 Manual Recording.21 Synchronized Recording of
34、3-CD Changer Playback.23 1 Disc Dubbing .25 Listening Edit Recording .26 Program Edit Recording.27 3-CD Changer to CDR Recording Options.28 Setting the Unit for High-speed Recording.29 Setting the Auto Track Spacing Function.29 Synchronized Recording from External Sources.30 Mixed Input Recording.31
35、 Special Recording Edit Operations .33 Skipping a Recorded Track on a CD-R or CD-RW (Track Skip).33 Erasing a Track or Tracks (Erase Function).33 Erasing All Tracks (Disc Erase Function).34 Finalizing a Disc.35 Making Recording of a Finalized CD-RW Disc Possible (Unfinalize Function) .35 Bypassing t
36、he FS Converter (Sampling Frequency Converter*) for More Efficient Digital Recording.36 Setting Up Synchronized Start Recording for External Digital Source (CD, MD, and DAT only) .37 Resetting the Unit to the Factory Default Settings.37 Setting the Clock.38 Setting the Present Time .38 Timer Operati
37、ons.40 Timer Play (wake-up play).40 Timer Recording (Unattended Recording from a Broadcast Receiver or Other Source).42 COMPU LINK Function.43 CD and CDR Messages.44 SCMS (Serial Copy Management System).46 Troubleshooting.47 Main Specifications.48 XL-R5010BK.book Page 1 Monday, June 4, 2001 11:40 AM
38、 2 English English Precautions Thank you for purchasing the XL-R5010BK CD/CDR Multiple Compact Disc Recorder. Please read these instructions thoroughly and carefully before using the unit to ensure that you will obtain optimum performance and a long service life. Safeguarding against electric shock,
39、 fire hazards and damage 1) A very low electrical current continues to flow when the STANDBY/ON (power) button is in the standby mode. To save power and ensure safety when the unit is not going to be used for an extended period of time, disconnect the power cord from the wall socket. (See page 10) 2
40、) Do not handle the power cord with wet hands. 3) To unplug the power cord from the wall socket, always take hold of the molded plug part and pull the plug rather than pull- ing on the cord. 4) If the power cord is damaged or a disconnected wire or worn contact is found, consult the nearest JVC dealership. 5) Do not bend the cord at a sharp angle or pull or twist it. 6) Do not modify the power cord in any way. 7) Do not attempt to disassemble the unit. Do not remove casi
免费区 
