《Pioneer-VSXD811S-avr-sm 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Pioneer-VSXD811S-avr-sm 电路图 维修手册.pdf（84页珍藏版）》请在收音机爱好者资料库上搜索。
1、 ORDER NO. PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01
2、, Singapore 159936 PIONEER CORPORATION 2002 DOWNUP ENTER INPUT SELECTOR MASTER VOLUME MULTI JOG R STANDBY STANDBY/ON PHONES Nm-, OFFON VSX-D811S-K RRV2597 AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-D811S-K VSX-D811S-S THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S). ModelTypePower Requir
3、ementRemarks VSX-D811S-KMVXJIAC230V VSX-D811S-KYXJIEWAC220-230V VSX-D811S-KYXJIGRAC220-230V VSX-D811S-SMYXJIAC220-230V For details, refer to Important symbols for good services. T-ZZK APR. 2002.printed in Japan RadioFans.CN 收音机爱 好者资料库 VSX-D811S-K2 1234 1234 C D F A B E SAFTY INFORMATION This service
4、 manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed r
5、epairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician. WARNING This product contai
6、ns lead in solder and certain electrical parts contain chemicals which are known to the state of California to cause cancer, birth defects or other reproductive harm. Health & Safety Code Section 25249.6 Proposition 65 NOTICE (FOR CANADIAN MODEL ONLY) Fuse symbols (fast operating fuse) and/or (slow
7、operating fuse) on PCB indicate that replacement parts must be of identical designation. REMARQUE (POUR MODLE CANADIEN SEULEMENT) Les symboles de fusible (fusible de type rapide) et/ou (fusible de type lent) sur CCI indiquent que les pices de remplacement doivent avoir la mme dsignation. ANY MEASURE
8、MENTS NOT WITHIN THE LIMITS OUTLINED ABOVE ARE INDICATIVE OF A POTENTIAL SHOCK HAZARD AND MUST BE CORRECTED BEFORE RETURN- ING THE APPLIANCE TO THE CUSTOMER. 2. PRODUCT SAFETY NOTICE Many electrical and mechanical parts in the appliance have special safety related characteristics. These are often no
9、t evident from visual inspection nor the protection afforded by them necessarily can be obtained by using replacement components rated for voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in this Service Manual. Electrical components having such
10、 features are identified by marking with a on the schematics and on the parts list in this Service Manual. The use of a substitute replacement component which does not have the same safety characteristics as the PIONEER recommended replacement one, shown in the parts list in this Service Manual, may
11、 create shock, fire, or other hazards. Product Safety is continuously under review and new instructions are issued from time to time. For the latest information, always consult the current PIONEER Service Manual. A subscription to, or additional copies of, PIONEER Service Manual may be obtained at a
12、 nominal charge from PIONEER. (FOR USA MODEL ONLY) 1. SAFETY PRECAUTIONS The following check should be performed for the continued protection of the customer and service technician. LEAKAGE CURRENT CHECK Measure leakage current to a known earth ground (water pipe, conduit, etc.) by connecting a leak
13、age current tester such as Simpson Model 229-2 or equivalent between the earth ground and all exposed metal parts of the appliance (input/output terminals, screwheads, metal overlays, control shaft, etc.). Plug the AC line cord of the appliance directly into a 120V AC 60 Hz outlet and turn the AC po
14、wer switch on. Any current measured must not exceed 0.5 mA. Device under test Leakage current tester Earth ground Reading should not be above 0.5 mA Also test with plug reversed (Using AC adapter plug as required) Test all exposed metal surfaces AC Leakage Test RadioFans.CN 收音机爱 好者资料库 VSX-D811S-K3 5
15、678 56 7 8 C D F A B E Important symbols for good services In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely. When you find the procedures bearing any of the symbols, be sure to fulfill them: 2. Adjustments To keep the original performanc
16、es of the product, optimum adjustments or specification confirmation is indispensable. In accordance with the procedures or instructions described in this manual, adjustments should be performed. 3. Cleaning For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and ot
17、her parts requiring cleaning, proper cleaning should be performed to restore their performances. 5. Lubricants, glues, and replacement parts Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying glue may lead to failures or troubles in the
18、product. By following the instructions in this manual, be sure to apply the prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed ones should be used. 4. Shipping mode and shipping screws To protect the product from damages or failures
19、that may be caused during transit, the shipping mode should be set or the shipping screws should be installed before shipping out in accordance with this manual, if necessary. 1. Product safety You should conform to the regulations governing the product (safety, radio and noise, and other regulation
20、s), and should keep the safety during servicing by following the safety instructions described in this manual. RadioFans.CN 收音机爱 好者资料库 VSX-D811S-K4 1234 1234 C D F A B E CONTENTS SAFTY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 1. SPECIFICA
21、TIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 2. EXPLODED VIEWS AND PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 2.1 PACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22、 . . . . . . . .6 2.2 EXTERIOR SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 2.3 FRONT PANEL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM . . . . . . . . . . . . . .
23、. . . . . . . . . . . . . . . . 12 3.1 BLOCK DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.2 OVERALL WIRING CONNECTION DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3.3 D.D & INPUT (1/4) ASSY . . . . . . . . . . . . . . . .
24、 . . . . . . . . . . . . . . . . . . . . . . . . 16 3.4 D.D & INPUT (2/4) ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 3.5 D.D & INPUT (3/4) ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3.6 D.D & INPUT (4/4) ASSY .
25、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 3.7 AMP & PRIMARY (1/2), TRANS2 and TRANS3 ASSYS . . . . . . . . . . . . . . . . . . . . . . . . 24 3.8 AMP & PRIMARY (2/2), REG. , HASHIGETA, B TO B and TRANS1 ASSYS . . . . . . . . . . . . . . 26 3.9 DIGITAL IN and K
26、AWA ASSYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 3.10 VIDEO, 6CH IN and S. VIDEO ASSYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 3.11 FRONT, R. ENCODER and POWER SW ASSYS . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 3.12 TR
27、ANS4, F. VIDEO, F. OPTICAL, H. P. , M. SW and PRI-OUT ASSYS . . . . . . . . . . . . . . . . 34 3.13 FM/AM TUNER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 4. PCB CONNECTION DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28、. . 38 4.1 TRANS2, TRANS3, TRANS1 and TRANS4 ASSYS. . . . . . . . . . . . . . . . . . . . . . . . . . . 39 4.2 DD & INPUT ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 4.3 AMP & PRIMARY, AMP INPUT and MECHA SW ASSYS. . . . . . . . . . . . . . . . . . .
29、 . . . . . 44 4.4 FRONT, R. ENCODER, POWER SW and H. P. ASSYS . . . . . . . . . . . . . . . . . . . . . . . . . 46 4.5 REGULATOR, HASHIGETA and KAWA ASSYS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 4.6 BOARD TO BOARD, DIGITAL IN, VIDEO and 6CH IN ASSYS . . . . . . . . . . . . . . .
30、. . . . . . 52 4.7 S. VIDEO, FRONT VIDEO, FRONT OPTICAL and PRI-OUT ASSYS . . . . . . . . . . . . . . . . . . 54 4.8 FM/AM TUNER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 5. PCB PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31、 . . . . . . . . . . . . . . 57 6. ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 6.1 TUNER SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 7. GENERAL INFORMATION. . . . . . . . . . . .
32、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 7.1 PCB LACATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 7.2 PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 7.2.1 IC . . .
33、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 7.2.2 DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 7.3 EXPLANATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34、 . . . . . . . . . 76 7.3.1 U-COM BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 7.3.2 POWER ON AND OFF SEQUENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 7.3.3 PROTECTION CIRCUIT. . . . . . . . . . . . . . . . . . . . . . . .
35、. . . . . . . . . . . . . . . . 79 7.4 CLEANING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 8. PANEL FACILITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 VSX-D811S-K5 5678 56 7 8 C D F A B E 1. S
36、PECIFICATIONS Accessories Remote control unit (XXD3044) AM loop antenna (ATB7009) FM wire antenna (ADH7005) AA size IEC R6P Dry cell batteries (x2) Miscellaneous Power Requirements UK model . AC 230 V, 50/60 Hz European model. AC 220-230 V, 50/60 Hz Power Consumption VSX-D811S.280W In Standby. 1 W D
37、imensions . 420 (W) x 158 (H) x 401 (D) mm Weight (without package) VSX-D811S. 10 kg Furnished Parts AM loop antenna . 1 FM wire antenna . 1 Dry cell batteries (AA size IEC R6P). 2 Remote control. 1 Operating instructions . 1 Specifications and the design are subject to possible modifications withou
38、t notice, due to improvements. DTS ,DTS-ES Extended Surround and Neo:6 are trademarks of Digital Theater Systems, Inc. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double D symbol are trademarks of Dolby Laboratorories. Amplifier Section Continuous Power Output (STERE
39、O mode) Front . 100 W per channel (DIN 1kHz, THD 1.0 %, 8 ) Continuous Power Output Front . 100 W per channel (1kHz, THD 1.0 %, 8 ) Center . 100 W (1kHz, THD 1.0 %, 8 ) Surround . 100 W per channel (1kHz, THD 1.0 %, 8 ) Surround Back . 100 W per channel (1kHz, THD 1.0 %, 8 ) Above specifications are
40、 applicable when the power supply is 230V. Input (Sensitivity/Impedance) CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT . 200 mV/47 k Frequency Response CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT . 5 Hz to 100,000 Hz dB Output (Level/Impedance) VCR/DVR REC, CD-R/TAPE/MD REC . 200 mV/2.2 k Tone Control BAS
41、S . 6 dB (100 Hz) TREBLE . 6 dB (10 kHz) LOUDNESS . +9 dB/+9 dB (100 Hz/10 kHz) Signal-to-Noise Ratio DIN (Continuous rated power output/50 mW) CD, VCR/DVR, CD-R/TAPE/MD,DVD/LD, TV/SAT .96 dB Video Section Input (Sensitivity/Impedance) VCR/DVR, DVD/LD, TV/SAT . 1 Vp-p/75 Output (Level/Impedance) VCR
42、/DVR . 1 Vp-p/75 Frequency Response VCR/DVR, DVD/LD,TV/SAT MONITOR. 5 Hz to 7 MHz dB Signal-to-Noise Ratio .55 dB FM Tuner Section Frequency Range. 87.5 MHz to 108 MHz Usable Sensitivity.Mono:13.2 dBf, IHF (1.3 V/ 75 ) 50 dB Quieting Sensitivity . Mono: 20.2 dB Stereo: 38.6 dBf Signal-to-Noise Ratio
43、 . Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf) Signal-to-Noise Ratio (DIN) . Mono: 62 dB Stereo: 58 dB Distortion. Stereo: 0.5 % (1 kHz) Alternate Channel Selectivity . 60 dB (400 kHz) Stereo Separation . 40 dB (1 kHz) Frequency Response .30 Hz to 15 kHz (1 dB) Antenna Input (DIN) . 75 unbalanced AM Tuner Section Frequency Range.531 kHz to 1,602 kHz Sensitivity (IHF, Loop antenna) .350 V/m Selectivity .25 dB Signal-to-Noise Ratio .
免费区 
