Pioneer-VSXD411-avr-sm 电路图 维修手册.pdf

《Pioneer-VSXD411-avr-sm 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Pioneer-VSXD411-avr-sm 电路图 维修手册.pdf（82页珍藏版）》请在收音机爱好者资料库上搜索。

1、ORDER NO. PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01,

2、 Singapore 159936 PIONEER CORPORATION 2002 RRV2588 THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S). T ZZK MAR. 2002 Printed in Japan Model No.Order No.Remarks VSX-D511/KUXJIRRV2581 This service manual should be used together with the following manual(s): AUDIO/VIDEO MULTI-CHANNEL REC

3、EIVER VSX-D411 VSX-D411-S Type Model Power Requiremen Remarks VSX-D411VSX-D411-S KUXJIAC120V KUXJICAAC120V RadioFans.CN 收音机爱 好者资料库 VSX-D411, VSX-D411-S 2 jpfy For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions, apply as you t

4、hink it appropriate.) Part No. Ref. No.MarkSymbol and DescriptionVSX-D511VSX-D411VSX-D411-SRemarks /KUXJI/KUXJI/KUXJICA PCB ASSEMBLIES NSPAMP it is not meant for the casual do-it- yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and saf

5、ely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to d

6、o so and refer the repair to a qualified service technician. WARNING This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to cause cancer, birth defects or other reproductive harm. Health & Safety Code Section 25249.6 Proposit

7、ion 65 NOTICE (FOR CANADIAN MODEL ONLY) Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacement parts must be of identical designation. REMARQUE (POUR MODLE CANADIEN SEULEMENT) Les symboles de fusible (fusible de type rapide) et/ou (fusible de type lent) sur

8、CCI indiquent que les pices de remplacement doivent avoir la mme dsignation. ANY MEASUREMENTS NOT WITHIN THE LIMITS OUTLINED ABOVE ARE INDICATIVE OF A POTENTIAL SHOCK HAZARD AND MUST BE CORRECTED BEFORE RETURNING THE APPLIANCE TO THE CUSTOMER. 2. PRODUCT SAFETY NOTICE Many electrical and mechanical

9、parts in the appliance have special safety related characteristics. These are often not evident from visual inspection nor the protection afforded by them necessarily can be obtained by using replacement components rated for voltage, wattage, etc. Replacement parts which have these special safety ch

10、aracteristics are identified in this Service Manual. Electrical components having such features are identified by marking with a on the schematics and on the parts list in this Service Manual. The use of a substitute replacement component which does not have the same safety characteristics as the PI

11、ONEER recommended replacement one, shown in the parts list in this Service Manual, may create shock, fire, or other hazards. Product Safety is continuously under review and new instructions are issued from time to time. For the latest information, always consult the current PIONEER Service Manual. A

12、 subscription to, or additional copies of, PIONEER Service Manual may be obtained at a nominal charge from PIONEER. 1. SAFETY PRECAUTIONS The following check should be performed for the continued protection of the customer and service technician. LEAKAGE CURRENT CHECK Measure leakage current to a kn

13、own earth ground (water pipe, conduit, etc.) by connecting a leakage current tester such as Simpson Model 229-2 or equivalent between the earth ground and all exposed metal parts of the appliance (input/output terminals, screwheads, metal overlays, control shaft, etc.). Plug the AC line cord of the

14、appliance directly into a 120V AC 60Hz outlet and turn the AC power switch on. Any current measured must not exceed 0.5mA. (FOR USA MODEL ONLY) Leakage current tester Reading should not be above 0.5mA Device under test Test all exposed metal surfaces Also test with plug reversed (Using AC adapter pl

15、ug as required) Earth ground AC Leakage Test VSX-D511 A B C D 5678 56 7 8 3 Important symbols for good services In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely. When you find the procedures bearing any of the symbols, be sure to fulfill

16、 them: 2. Adjustments To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable. In accordance with the procedures or instructions described in this manual, adjustments should be performed. 3. Cleaning For optical pickups, tape-deck heads, l

17、enses and mirrors used in projection monitors, and other parts requiring cleaning, proper cleaning should be performed to restore their performances. 5. Lubricants, glues, and replacement parts Appropriately applying grease or glue can maintain the product performances. But improper lubrication or a

18、pplying glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed ones should be used. 4. Shipping mode and shipping sc

19、rews To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or the shipping screws should be installed before shipping out in accordance with this manual, if necessary. 1. Product safety You should conform to the regulations governing the p

20、roduct (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual. VSX-D511 A B C D 1234 1234 4 CONTENTS SAFTY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21、. . . . .2 1. SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 2. EXPLODED VIEWS AND PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 2.1 PACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22、. . . . . . . . . . . . . . . . . . . .6 2.2 EXTERIOR SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 2.3 FRONT PANEL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM . . .

23、 . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.1 BLOCK DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.2 OVERALL WIRING CONNECTION DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3.3 D.D & INPUT(1/4) ASSY. . . . .

24、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 3.4 D.D & INPUT(2/4) ASSY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 3.5 D.D & INPUT(3/4) ASSY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3.6 D

25、.D & INPUT(4/4) ASSY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 3.7 AMP & PRIMARY(1/2), TRANS2 and TRANS3 ASSYS . . . . . . . . . . . . . . . . . . . . . . . . . 24 3.8 AMP & PRIMARY(2/2), REGULATOR, AMP INPUT and TRANS1 ASSYS . . . . . . . . . . . . . . . 26

26、 3.9 VIDEO, 6CH IN and S.VIDEO ASSYS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 3.10 FRONT, R.ENCODER and POWER SW ASSYS . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 3.11 DIGITAL IN, H.P. and KAWA ASSYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27、. . . . . 32 3.12 FM/AM TUNER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 4. PCB CONNECTION DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 4.1 TRANS1, TRANS2 and TRANS3 ASSYS . . . . . . . . . . . . . . . . . . . .

28、 . . . . . . . . . . . . 37 4.2 D.D & INPUT ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 4.3 AMP INPUT and AMP ASSYS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 4.4 FRONT, POWER SW, H.P. and R.ENCODER ASSYS . . . . .

29、. . . . . . . . . . . . . . . . . . . . 44 4.5 REGULATOR, HASHIGETA and KAWA ASSYS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 4.6 DIGITAL IN, 6CH IN, VIDEO and BOARD TO BOARD ASSYS . . . . . . . . . . . . . . . . . . . . . 50 4.7 FM/AM TUNER MODULE . . . . . . . . . . . . . . . . .

30、. . . . . . . . . . . . . . . . . . . . . . . 52 5. PCB PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 6. ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 7. GENERAL INFORMATION. .

31、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 7.1 DISASSEMBLY and DIAGNOSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 7.2 PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32、64 7.2.1 IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 7.2.2 DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 8. PANEL FACILITIES . . . . . . . . . . . . . . . . . . . . . . . . .

33、. . . . . . . . . . . . . . . . . . . . 75 VSX-D511 A B C D 5678 56 7 8 5 1. SPECIFICATIONS Accessories Remote control unit (XXD3038) AM loop antenna (ATB7009) FM wire antenna (ADH7004) AA size IEC R6P Dry cell batteries (x2) Amplifier Section Continuous average power output of 100 watts* per channe

34、l, min., at 8 ohms, from 20 Hz to 20,000 Hz with no more than 0.2 %* total harmonic distortion (front). Continuous Power Output Front . 100 W per channel (1kHz, 1.0 %, 8 ) Center . 100 W (1kHz, 1.0 %, 8 ) Surround .100 W per channel (1kHz, 1.0 %, 8 ) Surround Back .100 W per channel (1kHz, 1.0 %, 8

35、) Input (Sensitivity/Impedance) CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT . 200 mV/47 k Frequency Response CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD,TV/SAT . 5 Hz to 100,000 Hz dB Output (Level/Impedance) VCR/DVR REC, CD-R/TAPE/MD REC . 200 mV/2.2 k Tone Control BASS . 6 dB (100 Hz) TREBLE . 6 dB (10 kHz) L

36、OUDNESS . +9 dB/+9 dB (100 Hz/10 kHz) Signal-to-Noise Ratio (IHF, short circuited, A network) CD, VCR/DVR, CD-R/TAPE/MD,DVD/LD, TV/SAT .96 dB Signal-to Noise Ratio EIA, at 1 W (1 kHz) CD, VCR/DVR, CD-R/TAPE/MD,DVD/LD, TV/SAT .79 dB Video Section Input (Sensitivity/Impedance) VCR/DVR, DVD/LD, TV/SAT

37、. 1 Vp-p/75 Output (Level/Impedance) VCR/DVR . 1 Vp-p/75 Frequency Response VCR/DVR, DVD/LD,TV/SAT MONITOR. 5 Hz to 7 MHz dB Signal-to-Noise Ratio .55 dB Cross Talk .55 dB FM Tuner Section Frequency Range. 87.5 MHz to 108 MHz Usable Sensitivity.Mono:13.2 dBf, IHF (1.3 V/ 75 ) 50 dB Quieting Sensitiv

38、ity . Mono: 20.2 dB Stereo: 38.6 dBf Signal-to-Noise Ratio . Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf) Distortion. Stereo: 0.5 % (1 kHz) Alternate Channel Selectivity . 60 dB (400 kHz) Stereo Separation . 40 dB (1 kHz) Frequency Response .30 Hz to 15 kHz (1 dB) Antenna Input (DIN) . 75 unbal

39、anced AM Tuner Section Frequency Range.530 kHz to 1,700 kHz Sensitivity (IHF, Loop antenna) .350 V/m Selectivity .25 dB Signal-to-Noise Ratio .50 dB Antenna. Loop antenna Miscellaneous Power Requirements. AC 120 V, 60Hz Power Consumption VSX-D511. . 260W (KU) 340VA (KC) In Standby . 1 W AC Outlet.10

40、0 W MAX. (SWITCHED) Dimensions . 420 (W) x 158 (H) x 393 (D) mm (16-9/16 (W) x 6-4/16 (H) x 15-8/16 (D) in.) Weight (without package) kgVSX-D511. 9.0 (19.8 lb) Furnished Parts AM loop antenna . 1 FM wire antenna . 1 Dry cell batteries (AA size IEC R6P). 2 Remote control. 1 Operating instructions . 1

41、 Specifications and the design are subject to possible modifications without notice, due to improvements. * Measured pursuant to the Federal Trade Commissions Trade Regulation rule on Power Output Claims for Amplifiers. * Measured by Audio Spectrum Analyzer. +0 3 +0 3 DTS ,“ES” and DTS Digital Surro

42、und are trademarks of Digital Theater Systems, Inc. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic II” and the double D symbol 2 are trademarks of Dolby Laboratorories. INPUT SELECTOR CDTV/SATDVD/LDRECEIVER DVD DVD CONTROL SUB TITLE AUDIO TEST TONE LEVEL EFFECT MENU DVD TUNER EDIT RECEI- VER TOP MENU STANDARDSTEREO ADVANCED SURROUND INPUT ATT FL DIMMERMUTE MASTER VOLUME CD-R/ TAPE/MD VCR/ DVR ENTER SETUP AV RECEIVER TUNING BANDCLASSMPXDISPLAY CH SELECT STATION MIDNIGHT/ LOUDNESSTUNER 1 4 78 3 VSX-D511 A B C D 1234 1234 6 2