Philips-AZ-5130-Service-Manual(1) 电路图 维修手册.pdf

《Philips-AZ-5130-Service-Manual(1) 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Philips-AZ-5130-Service-Manual(1) 电路图 维修手册.pdf（31页珍藏版）》请在收音机爱好者资料库上搜索。

1、Handling Chip Components and Safety .1 - 1 Technical Specification - to interrupt recording or playback. STOPOPEN 9 / - To stop the tape and to open the cassette holder. SEARCH 5 or 6 - to fast wind/rewind the tape. PLAY 1 - to start playback. RECORD 0 - to start recording. 4 REMOTE SENSOR - infrare

2、d sensor for remote control 5 LCD Display - to show the VCD, MP3 functions and disc status. 6 TUNING - to tune to radio stations 7 PLAYPAUSE 2; - To start or interrupt CDplayback. 8 STOP 9 - to stop playback 9 SEARCH or - to skip or search a passage or a track 0 DBB (Dynamic Bass Boost) - for a more

3、 vivid bass response. ! REPEAT - to repeat a track/programme/entire CD playback SHUFFLE - to play all tracks in random order # VOLUME - to adjust volume level. $ Telescopic aerial - to improve FM radio reception % VIDEO/AUDIO OUT - connect to the TV or VCR VIDEO/AUDIO IN Battery door - to open the b

4、attery compartment - to start or interrupt playback. * SEARCH 5 or 6 (for CD/VCD/MP3-CD) - to search back or forward. ( ALBUM for MP3-CD only . . . . to select previous / next album ) TRACK for MP3-CD only . . . . to select previous/next title. for CD/VCD . . . . . . . . to search backward/ forward

5、track. STOP 9 - to stop playback or to clear a programme. 3 - 3 CD/VCD/MP3-CD English This set can play all digital audio CD, video CD, finalised digital audio CD-Recordable (CDR) discs and finalised digital audio CD-Rewritable (CDRW) discs. Support following MP3-CD formats: ISO 9660 or ISO 9660 + J

6、oliet format - Max. 30 characters Max. Track number is 400 Max. nested directory is 8 levels The max. album number is 99 The max. MP3 programme track number is 20 The max. length of each track is 99 minutes 59 seconds The player can play mixed mode disc of CD / MP3-CD Supported VBR bit-rate Supporte

7、d sampling frequencies for MP3 disc : 8 kHz to 48 kHz (44.1kHz preferably) Supported bit-rates of MP3 disc are: 32 - 320 kbps (128 kbps preferably) Following formats are not supported The files like *.WMA, *AAC, *.DLF, *.M3U, *.PLS, MP3 PRO The non-session closed discs 1. Set the source selector to

8、CD/VCD. 2. Lift to open the CD door. OP will be displayed 3. Insert a disc with the label side facing up. 4. Close the CD door. The total number of tracks of the disc appear on the display. no will be displayed if no disc is inserted or error in CD operation For MP3-CD only The total track number XX

9、X and album number “AXX will be displayed interchangeably. MP3 L R LOADING A DISC DISCS FOR PLAYBACK VCD MP3 L R CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Environmental information All u

10、nnecessary packaging material has been omitted. We have done our utmost to make the packaging easily separable into three mono materials: cardboard, polystyrene and plastic. Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regula

11、tions regarding the disposal of packaging materials, exhausted batteries and old equipment. INSTRUCTIONS FOR USE GENERAL OPERATION English 1. Check if the mains voltage as shown on the type plate (on the bottom of the set) corresponds to your local mains voltage. If it does not consult your dealer o

12、r service organization. 2. Connect the mains lead to the AC MAINS socket and the wall socket. The set is now ready for use. 3. To switch off the mains supply completely, pull the mains plug out of the wall socket. Disconnect the mains lead when you change over to battery supply, or to protect the se

13、t during heavy thunderstorms. The type plate is located on the bottom of the set. 1. To switch on the set, adjust the source selector. 2. Adjust the sound using the VOLUME and DBB controls. 3 To switch off the set, adjust the source selector to the TAPE/OFF position, with the cassette keys released.

14、 1 Set the source selector to FM or MW. 2. Adjust the sound using the VOLUME controls and the DBB switch. 3. Tune to a radio station using the TUNING knob. For FM, pull out the telescopic aerial. To improve FM-reception, incline and turn the aerial. Reduce its length if the FM-signal is too strong (

15、very close to a transmitter). For MW, the set is provided with a built-in aerial, so the telescopic aerial is not needed. Direct the aerial by turning the whole set. 4. To switch off, set the source selector to the TAPE/OFF position (with the cassette keys released). RADIO RECEPTION PLAY STOPOPENPAU

16、SESEARCHSEARCH S E A R C H S T O P D Y N A M IC BASS B O O S T DBB P R O G R A M R E P E A T V O L U M E F I L TUNING REPEAT ALL PROGRAM allprogshuffle VCD MP3MP3 L R GENERAL OPERATION MAINS OFF MWFM TAPE CD-VCD L I F T T O O P E N L I F T T O O P E N AZ5 130 VCD MP3 CDS OUN DMA CHIN E PLAY STOPOPEN

17、PAUSESEARCHSEARCH S E A R C H S T O P D Y N A M IC BAS S B O O S T P L A Y / P A U S E DBB P R O G R A M R E P E A T V O L U M E N E P O O T T F I L TUNING OFF MWFM TAPE CD-VCD L I F T T O O P E N L I F T T O O P E N AZ5 130 VCD MP3 CDS OUN DMA CHIN E PLAY STOPOPENPAUSESEARCHSEARCH S E A R C H S T O

18、 P D Y N A M IC BAS S B O O S T P L A Y / P A U S E DBB P R O G R A M R E P E A T V O L U M E N E P O O T T F I L TUNING 3 - 4 CD/VCD/MP3-CD English Programming tracks of disc is possible when playback is stopped. Up to 20 tracks can be stored in the memory in any order. 1. In stop mode, press PROG

19、(on remote control) to enter programme setting. PROG will flash on the display. 2. Press digits 0 - 9 on the remote control or / to select the desired track. 3. Press PROG to store the select track. The number “XXX” represents the track no. Repeat steps 1 to 3 to store other tracks. 4. Press 9 to en

20、d programme setting. PROG will remain on the display. Press PROG (on remote control) in stop mode to review the programme sequence. 5. Press2;to play the programmed tracks. If you press REPEAT during programme playback, the current track or all programmed tracks will be played repeatedly. REPEAT/REP

21、EAT ALL icon and PROG will appear on the display. 6. Press 9 in stop mode to clear the programme. PROG will disappear from the display. Notes : -The programming is automatically cleared as soon as the CD compartment is opened. - The function of programme setting is disabled in PLAY/PAUSE mode. - Pro

22、gramme cannot be used for VCDs when PBC is switched on. Switch off PBC before storing tracks from such a VCD. For MP3-CD only 1. In stop mode, press PROGon the remote control to enter programme setting. PROGwill start flashing and P01 will be displayed. On TV screen, PROG program list (5 lines per p

23、age) will be displayed. 2. Press digits 0 - 9 on the remote control or /to select the desired album. 3. PressPROGto store the select album. The number “AXX” represents the album no. 4. Press / repeatedly (or digits 0 - 9 on the remote control) to select the desired TRACK for programming. 5. PressPRO

24、Gto store the select track. PROG will remain on the display. Repeat steps 1 to 5 to store other desired album and track. 6. Press 9 to end programme setting. PressPROGin stop mode can review the programme sequence. 7. Press 2 to start programme playback. You can press / to select the programmed trac

25、k to play. 8. Press 9 once stop programme playback or twice to clear the programme. PROGRAMMING TRACKS INSTRUCTIONS FOR USE CD/VCD/MP3-CD English On TV screen, the total ALBUM and TRACK number will display, also with the album list (max. 10 lines per page). The current selected music is highlighted.

26、 Notes : - To ensure good system performance, wait until the disc completely reads before proceeding. - For MP3-CD, the disc reading time may exceed 1 minute due to the large number of songs compiled into one disc. 1. Press2;to start playback. The track number of the current track and 2appear on the

27、 display. To interrupt playback, press 2;. 2will disappear and the current track number will start flashing. To resume playback, press 2;again. 2. To stop playback, press 9. To select a desired track Press or on the set repeatedly (or use digits 0 - 9 buttons on the remote control) until the desired

28、 track appears on the display. If playback is stopped, press 2;to start playback. To search for a particular passage during playback Press and hold or on the set for 1 second (or on the remote control,press5 or 6) During searching, the volume will be muted. For MP3-CD only To select a desired album

29、On the remote control, press or until the desired album number appear on the display. AXX will be displayed. On TV screen, the arrow will move forward/backward in the ALBUM menu. To select a desired track Press or on the set repeatedly (or on the remote control, press or ) to select a desired track

30、from the current album. XXX will be displayed. On TV screen, the arrow will move forward/backward in the TRACK menu. Use the digital keys on the remote control to select the track under current album directly. To select and playback another track during playback mode 1. Press or repeatedly to select

31、 another track. The new selected track will show on the display screen and TV screen and playback continuously. 2. Press2;to start playback the new selected track. For VCD only Either press5or6on the remote control repeatedly to select fast search speed (x1, x2, x3 or x4) or press to have a still pi

32、cture on the TV screen. The sound will be muted. On TV screen, PAUSE will be displayed. 2. Press2;again to continue playback. Goto 1. Press GOTO on the remote control. On TV screen, GOTO -:- will be displayed. 2. Press digits 0 - 9 on the remote control to key in the disc time which you want the dis

33、c to begin playback. Note : - The disc time entered should not be greater than the total disc time. - Goto mode is not available whenever PBC mode is switched on. Slow 1. Press SLOW on the remote control to watch a VCD at a slower speed. There are 4 types of slow modes to select. The sound will be m

34、uted. On TV screen, SLOW 1/2, SLOW 1/4, SLOW 1/8 or SLOW 1/16 will be displayed. 2. To resume playback at normal speed, press SLOW repeatedly until PLAY appears on the TV screen or press 2;. A-B repeat This feature is also applicable to audio CD (except for MP3-CD). To Play a certain scene or passag

35、e of the disc repeatedly. VIDEO CD INSTRUCTIONS FOR USE CD/VCD/MP3-CD English You can play all the tracks in random order. 1. During playing, pause or stop mode, press SHUFFLE to enable SHUFFLE play mode. SHUFFLE will appear on the display. 2. To exit shuffle mode, press SHUFFLE again or 9. SHUFFLE

36、will disappear from the display. Note : - If the Shuffle function enabled, and the Repeat function is set on, will disable the Shuffle play mode. You can play the current track or the whole disc repeatedly. 1. During CD/ MP3-CD playing or pause mode, press REPEAT on the remote control or on the set.

37、 REPEAT icon - to repeat the current track. REPEAT ALL icon all- to repeat the whole disc. 2. To exit the repeat mode, press REPEAT until the REPEAT/REPEAT ALL icon disappears from the display. Notes : - If the Repeat function is enable, and the Shuffle function is set on, will disable all the Repea

38、t play modes. - If the Repeat function is enable, and the Stop button is pressed, will disable all the Repeat play modes. Adjusting the TV System Before viewing the Video CD, ensure that the set is switched to corresponding PAL or NTSC system of your TV set (exception Multi - system TV). 1. On the r

39、emote control, press NTSC/PAL to switch between NTSC and PAL TV system. OSD - On Screen Display If you insert VCD/CD, your TV screen will serve as an additional display for messages (e.g. PLAY, STOP), and information stored on the VCD/CD. Press OSD on the remote control to select viewing various inf

40、ormation. The current track and current /elapsed time in the track/disc appear on the display. VIDEO CD REPEAT SHUFFLE 3 - 6 CD/VCD/MP3-CD English This set can play a mixed mode disc. mixture of audio CD and MP3-CD mixture of other combination may not be operated normally. 1. As default, audio CD tr

41、acks will be read first. will be displayed. TV screen, MIX, CD-DA will be displayed. 2. PressMIX/SEL(on the remote control) repeatedly to select other disc modes. MP3-CD: MP3 is displayed. TV screen, MP3 menu is displayed. Notes : - For protected CDs, “MIX CD-DA” is displayed on your TV screen even

42、if the disc does not have other format. The MIX/SELnormal functions are not available for protected CDs. PLAYING A MIXED MODE DISC VCD MP3 L R INSTRUCTIONS FOR USE CD/VCD/MP3-CD English 1. Press A-B on the remote control during playback to mark the start point of the chosen scene or passage. REPEAT

43、A will appear on the screen. 2. Press A-B again to mark the end of the chosen scene or passage. REPEAT AB will appear on the screen. The selected scene or passage will start playing repeatedly. 3. Press A-B once more to return to normal playback. REPEAT AB will disappear from the display. Notes : -

44、You can also cancel A-B repeat by pressing or . - A-B repeat marking can cross from one track to another. But for VCD 2.0, you are only able to set the A-B repeat marking within the same track. Resume In stop mode, press RESUME on the remote control to start playback again from where you have stoppe

45、d. Note : - Resume will not be available if you have changed the disc, opened the disc tray or disconnected the system from the power supply. View This feature allows you to scan through a VCD for a quick review. PBC mode must be switched off. 1. In stop mode, press VIEW on the remote control to go

46、to disc view function. On TV screen, up to 9 pictures will be displayed. If a menu consists of more than one page, press or to view the previous/next page. The first several seconds of each track will be played. To exit review mode, press digits 0 - 9 to play the desired track or 2;to play the curre

47、nt selected track. 2. In playback mode, press VIEW on the remote control to go to track view function. press or to select the track. On TV screen, up to 9 pictures within the track will be displayed. The first several seconds of each picture will be played. To exit review mode, press digits 0 - 9 to

48、 play the desired position within the track or 2;to play the current selected position. Note : - If the disc is AVCD disc and therere no video tracks on the same viewed page, cannot use the direct digital key to play the track. Return Press RETURN on the remote control to return to the previous VCD

49、disc MENU level. It is functional only for Video CD when PBC is switched on. R/L/ST You can use it to select the different audio modes. Press R/L/ST on the remote control repeatedly to select the following modes: on the LCD represents channel left/channel right / dual channel on a bilingual VCD or mono left / mono right / stereo on single language VCD. VIDEO CD 3 - 7 CASSETTE RECORDER English 1. Set the source selector to FM or MW. 2. Tune to the desired radio station using the TUNING knob. 3. PressSTOPOPEN 9 /to open the