Sony-CMTCP1-cs-sm 电路图 维修手册.pdf

《Sony-CMTCP1-cs-sm 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Sony-CMTCP1-cs-sm 电路图 维修手册.pdf（46页珍藏版）》请在收音机爱好者资料库上搜索。

1、CMT-CP1 US Model Canadian Model AEP Model UK Model E Model Australian Model SERVICE MANUAL MICROFILM Sony Corporation Home A&V Products Company MICRO Hi-Fi COMPONENT SYSTEM 99B001689-1 Printed in Japan 1999.2 Published by Quality Assurance Dept. (Shinagawa) CMT-CP1 is composed of following models. A

2、s for the service manual, it is issued for each component model, then, please refer to it. CMT-CP1 AMPLIFIER/CD PLAYER/ TAPE DECK/TUNER HCD-CP1 SPEAKER SYSTEMSS-CCP1 Abbreviation AED : North European CND : Canadian HK: Hong Kong MY: Malaysia SP: Singapore TH: Thai 1-418-299-11COMMANDER, STANDARD (RM

3、-SCP1) 1-501-374-11ANTENNA (LOOP) (AM/MW) 1-501-659-61ANTENNA (FM) (US, CND) 1-754-060-11ANTENNA (FM) (EXCEPT US, CND) 3-865-909-11MANUAL, INSTRUCTION (ENGLISH) (EXCEPT AED) 3-865-909-21MANUAL, INSTRUCTION (FRENCH, SPANISH) (AEP, MY, SP, TH) 3-865-909-31MANUAL, INSTRUCTION (DUTCH, GERMAN) (AEP) 3-86

4、5-909-41MANUAL, INSTRUCTION (ITALIAN, PORTUGUESE) (AEP) 3-865-909-51MANUAL, INSTRUCTION (DANISH, FINNISH, SWEDISH) (AED) 3-865-909-61MANUAL, INSTRUCTION (POLISH) (AED) 3-865-909-71MANUAL, INSTRUCTION (CHINESE) (MY, SP, HK) 3-865-909-81MANUAL, INSTRUCTION (FRENCH) (US, CND) 3-865-909-91MANUAL, INSTRU

5、CTION (ENGLISH, THAI) (TH) 4-991-151-01COVER, BATTERY (FOR RM-SCP1) Part No.Description PARTS LIST(ACCESSORIES & PACKING MATERIALS) COMPONENT MODEL NAME FOR CMT-CP1 9-928-808-11 RadioFans.CN 收音机爱 好者资料库 MICROFILM SERVICE MANUAL MICRO HiFi COMPONENT SYSTEM SPECIFICATIONS HCD-CP1 Dolby noise reduction

6、manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double-D symbol a are trade- marks of Dolby Laboratories Licensing Corporation. US Model Canadian Model AEP Model UK Model E Model Australian Model HCD-CP1 is the Amplifier, CD player, Tape Deck and Tuner secti

7、on in CMT-CP1. Continued on next page Model Name Using Similar MechanismNEW CD Mechanism TypeKSL-2130CCP/K1N Optical Pick-up NameKSS-213C/K1N Model Name Using Similar MechanismHCD-ED1 Tape Transport Mechanism TypeCMAL1Z023A CD Section Tape deck Section Note CD block, tape deck block and tuner pack a

8、re supplied with the assembled block. RadioFans.CN 收音机爱 好者资料库 2 RadioFans.CN 收音机爱 好者资料库 3 1.SERVICING NOTES.3 2.GENERAL Location of Controls .5 Setting the Time .6 3.DISASSEMBLY.7 4.SERVICE MODE. 11 5.ELECTRICAL CONFIRMATIONS AND ADJUSTMENTS DECK Section. 12 6.DIAGRAMS 6-1.Block Diagram TAPE Section

9、 . 15 6-2.Block Diagram MAIN Section . 17 6-3.Block Diagram DISPLAY/POWER SUPPLY Section . 19 6-4.Note for Printed Wiring Boards and Schematic Diagrams . 21 6-5.Printed Wiring Board MAIN Section . 23 6-6.Schematic Diagram MAIN Section (1/4) . 25 6-7.Schematic Diagram MAIN Section (2/4) . 27 6-8.Sche

10、matic Diagram MAIN Section (3/4) . 29 6-9.Schematic Diagram MAIN Section (4/4) . 31 6-10. Printed Wiring Boards PANEL/CD LOADING Section . 33 6-11. Printed Wiring Boards CONTROL Section . 37 6-12. Schematic Diagram CONTROL Section . 39 6-13. Printed Wiring Board POWER Section . 41 6-14. Schematic Di

11、agram POWER Section . 42 6-15. IC Pin Function Description . 43 7.EXPLODED VIEWS. 45 8.ELECTRICAL PARTS LIST. 49 TABLE OF CONTENTS SECTION 1 SERVICING NOTES The laser diode in the optical pick-up block may suffer electro- static break-down because of the potential difference generated by the charged

12、 electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. NOTES ON LASER DIODE EMISSI

13、ON CHECK The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pick-up block. Therefore, when checking the laser diode emis- sion, observe from more than 30 cm away from the objective lens. Notes on chip component replace

14、ment Never reuse a disconnected chip component. Notice that the minus side of a tantalum capacitor may be dam- aged by heat. Flexible Circuit Board Repairing Keep the temperature of the soldering iron around 270 C dur- ing repairing. Do not touch the soldering iron on the same conductor of the circu

15、it board (within 3 times). Be careful not to apply force on the conductor when soldering or unsoldering. NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous ra- diation

16、exposure. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. The following caution label is located inside the unit. CAUTION:INVI

17、SIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. ADVARSEL :USYNLIG LASERSTRLING VED BNING NR SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDG UDSAETTELSE FOR STRLING. VORSICHT :UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEFFNET UND SICHEREITSVERRIEGELUNG BERBRCKT. NICHT D

18、EM STRAHL AUSSETZEN. VARO!:AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALT- TIINA NKYMTTMLLE LASERSTEILYLLE. L KATSO STEESEEN. VARNING:OSYNLING LASERSTRLING NR DENNA DEL R PPNAD OCH SPRREN R URKOPPLAD. BETRAKTA EJ STRLEN. ADVERSEL :USYNLIG LASERSTRLING NR DEKSEL PNES OG SIKKERHEDSLS BRYTES. UNNG EK

19、SPONERING FOR STRLEN. VIGYAZAT!:A BURKOLAT NYITSAKOR LTHATATLAN LZERSU- GRVESZLY! KERLJE A BESUGRZST! 4 ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT! LES COMPOSANTS IDENTIFIS PAR UNE MARQUE ! SUR LES DIAGRAMMES SCHMATIQUES ET LA LISTE DES PICES SONT CRITIQUES POUR LA SCURIT DE FONCTIONNEMENT. NE R

20、EMPLACER CES COM- POSANTS QUE PAR DES PICES SONY DONT LES NUMROS SONT DONNS DANS CE MANUEL OU DANS LES SUPPLMENTS PUBLIS PAR SONY. SAFETY-RELATED COMPONENT WARNING! COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATI

21、ON. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- LISHED BY SONY. SAFETY CHECK-OUT After correcting the original service problem, perform the follow- ing safety check before releasing the set to the customer: Check the antenna termi

22、nals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below. LEAKAGE TEST The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not ex

23、ceed 0.5 mA (500 microampers.). Leakage current can be measured by any one of three methods. 1.A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers instructions to use these instruments. 2.A battery-operated AC milliammeter. The Data Precision 245 digital mul

24、timeter is suitable for this job. 3.Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indica- tion is 0.75 V, so analog meters must have an accurate low- voltage scale. The Simpson 250 and Sanwa SH-63Trd are ex- amples of a passive VOM that

25、is suitable. Nearly all battery operated digital multimeters that have a 2 V AC range are suit- able. (See Fig. A) Fig. A.Using an AC voltmeter to check AC leakage. 1.5 k0.15 F AC voltmeter (0.75 V) To Exposed Metal Parts on Set Earth Ground MODEL IDENTIFICATION Back Panel Power Voltage Indication V

26、OLTAGE SELECTOR Switch Model Power Voltage Incdication US, Canadian modelsAC: 120 V 60 Hz 55 W AEP, UK modelsAC: 230 V 50 Hz 55 W Malaysia, Singapore, AC: 110 120/ Hong Kong and 220 240 V 50/60 Hz 55 W Thai models 5 SECTION 2 GENERAL LOCATION OF CONTROLS Front View 1TAPE deck 2Liquid crystal display

27、 3TAPE P button 4TAPE 0 button 5TAPE button 6TAPE 6 button 7TAPE p button 8TAPE ) button 9TAPE REC r button 0CD SYNC button and indicator !BAND button !TUNING + button !TUNING button !TUNING MODE button !CD EJECT 6 button !CD p button !CD + ) button !CD REPEAT button !DSG button and indicator STANDB

28、Y 1/u button and indicator MD/VIDEO button and indicator TAPE button and indicator CD button and indicator TUNER button and indicator Remote sensor PHONES jack CD disc tray VOLUME knob CD button #CD = 0 button #CD PLAY MODE button 1AM ANTENNA terminals 2FM ANTENNA jack or terminals 3VOLTAGE SELECTOR

29、 switch (Malaysia, singapore and Hong Kong) 4LINE OUT jacks 5MD IN jacks 6VIDEO IN jacks 7CD DIGITAL OUT OPTICAL connector 8SPEAKER terminals 12 3 4 5 6 8 7 9 ! ! ! ! ! ! ! ! ! # ! # 21 3 4 5 6 7 8 Rear View 6 This section is extracted from instruction manual. 7 COVER (UPPER) TAPE MECHANISM DECK Not

30、e: Follow the disassembly procedure in the numerical order given. SECTION 3 DISASSEMBLY 1two screws (case3 TP2) 3cover (upper) 2four screws (BTP3 8) 1two screws (case3 TP2) 5two screws 2connector 4tape mechanism deck 1flat wire (12 core) 3two screws (BTP3 8) 3two screws (BTP3 8) 6motor 7main belt 8F

31、/R belt 9claw 0pinch roller 8 FRONT PAENL SECTION FRONT PAENL SECTION INSTALLATION Note: Follow the assembly procedure in the numerical order given. 1connector (CN303) 1connector 1connector (CN809) 2two flat wires (CN802, 804) 2flat wire (12 core) 5two claws 3screw (KTP3 6) 7front panel section 6con

32、nector (CN603) 4two screws (BTP3 8) 3screw (KTP3 6) 6connector 5flat wire (12 core) 5two flat wires (CN802, 804) 6two connectors (CN303, 809) 2connector (CNP806) Note: As CNP806 pin is bent easily, treat is carefully. 3screw (KTP3 6) 4two screws (BTP3 8) 3screw (KTP3 6) 1two claws 9 CD MECHANISM DEC

33、K BU ASSY 3two screws (BTP3 8) 3two screws (BTP3 8) 2flat wire (19 core) (CN805) 1connector 4CD mechanism deck 1screw (P2.6 10) 3coil spring (front) 3coil spring (rear) 3coil spring (rear) 2washer 2washer 2washer 3coil spring (front) 2washer 1screw (P2.6 10) 1two screws (P2.6 10) 4BU assy Note: As 3

34、 coil springs are missed easily, treat them carefully. 10 4Pull the tray. 8Remove the tray. 7lock lever 1two screws (PTPWH2.6 7) 2chucking yoke (K) 6damper (S) 5claw 7lock lever 3Rotate the control cam in the direction of arrow A. A TRAY SUB CHASSIS INSTALLATION Note: Follow the assembly procedure i

35、n the numerical order given. 2Install the drive gear with gear position as shown in figure. gear front side 1Install the control cam with gear position as shown in figure. gear front side 3screw (PTPWH2.6 16) 5two screws (PTPWH2.6 7) 4sub chassis 11 SECTION 4 SERVICE MODE Liquid Crystal Display All

36、Lit Check Mode Procedure: 1.Set to standby state. 2.Press three buttons of p (TAPE), p (CD), and MD/VIDEO simultaneously. 3.Liquid crystal display are all turned on. 4.To exit from this mode, press the 1/ubutton to turn the power OFF. Tape Deck Aging Mode This mode can be used for operation check of

37、 tape deck section. Procedure: 1.Set a tape in the tape deck. 2.Set to standby state. 3.Press three buttons of p (TAPE), p (CD), and TAPE si- multaneously. 4.The aging is executed in bellow sequence. 5.To exit from the aging mode, press the 1/ubutton to turn the power OFF. Aging mode sequence: CD Ag

38、ing Mode This mode can be used for operation check of CD section. Procedure: 1.Load a CD disc. 2.Set to standby state. 3.Press three buttons of p (TAPE), p (CD), and TUNER simultaneously. 4.The aging is executed in bellow sequence. 5.To exit from the aging mode, press the 1/ubutton to turn the power

39、 OFF. Aging mode sequence: Start REC pause for 3 seconds FWD REC Fast forward REV Play REC pause for 3 seconds REV REC Rewind FWD Play Shut off Shut off Shut off Shut off 1 minute 3 minutes 1 minute 3 minutes Start Open the disc tray Close the disc tray Play the last track 12 SECTION 5 ELECTRICAL CO

40、NFIRMATIONS AND ADJUSTMENTS 0 dB=0.775 VDECK SECTION TapeSignalUsed for P-4-A10010 kHz, 10 dBAzimuth Adjustment WS-48B3 kHz, 0 dBTape Speed Adjustment P-4-L300315 Hz, 0 dBLevel Adjustment Note: Confirm each contents of this section first of all. If the results are not satisfied, do the adjustment. 1

41、.Demagnetize the record/playback head with a head demagne- tizer. 2.Do not use a magnetized screwdriver for the adjustments. 3.After the adjustments, apply suitable locking compound to the parts adjust. 4.The adjustments should be performed with the rated power supply voltage unless otherwise noted.

42、 5.The adjustments should be performed in the order given in this service manual. (As a general rule, playback circuit ad- justment should be completed before performing recording circuit adjustment.) 6.The adjustments should be performed for both L-CH and R- CH. 7.Switches and controls should be se

43、t as follows unless other- wise specified. Test Tape Record/Playback Head Azimuth Adjustment Procedure: 1.Mode: Playback set MAIN board LINE OUT jack (PJ301) L-CH, R-CH + level meter test tape P-4-A100 (10 kHz, 10 dB) Screw position L-CH peak within 1dB Output level L-CH peak R-CH peak within 1dB Sc

44、rew position R-CH peak 2.Turn the adjustment screw and check output peaks. If the peaks do not match for L-CH and R-CH, turn the adjustment screw so that outputs match within 1dB of peak. 3.Mode: Playback 4.Repeat step 1 to 3 in playback (REV) mode. 5.After the adjustments, apply suitable locking co

45、mpound to the pats adjusted. Adjustment Location: MAIN board CN301 set test tape P-4-A100 (10 kHz, 10 dB) R-CH oscilloscope L-CH R-CH VH waveform of oscilloscope in phase 4590135180 goodwrong MAIN board LINE OUT jack (PJ301) L-CH forward reverse 13 Playback level Confirmation and Adjustment Procedur

46、e: Mode: Playback Confirm playback level is within specification values as follows. If these levels are out of specification values, adjust the RV151 (L-CH) and RV251 (R-CH) on the MAIN board so that the level meter reading become within specification values. Specification values: PJ301 PB level: 30

47、1.5 to 338.3 mV (8.2 to 7.2 dB) level differ- ence between the channels: within 0.5 dB Adjustment Location: MAIN board REC Bias Confirmation and Adjustment Procedure: 1.Mode: Record 2.Mode: Playback 3.Confirm playback the signal recorded in step 1 become speci- fication values as follows. If these va