Marantz-SR6001-avr-mz08022 电路图 维修手册.pdf

《Marantz-SR6001-avr-mz08022 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Marantz-SR6001-avr-mz08022 电路图 维修手册.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、 100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ08-022 Date: April 14, 2008 _ Model: SR6001 Subject: Software Update Information * This Service Bulletin is only intended for units with the following minor problem and is not required for all units. Please perform update upon customer c

2、laim. Symptom: 1. Noise is heard in the audio when the product is connected via HDMI to a player capable of outputting DSD audio and is playing back the DSD audio of a SACD with the Surround set to CS II. 2. No sound comes out if the surround mode is selected to SOURCE DIRECT or PURE DIRECT while th

3、e product is playing back a CD, connected via DIGITAL to a player capable of converting the CD sampling output frequency to 88.2 KHz. 3. Vertical fringes appear on the left side of the TV screen when the audio is converted from the Analog Component Signal (480p/576p, 720p, 1080p) to HDMI. Solution:

4、1. The input mode has been set to always receive DSD input in STEREO Input. 2. The device common master clock for processing digital audio signals has been reset to 88.2KHz/96KHz. 3. The digital video sync output has been changed from the embedded type to the separate type. (Change of MAIN and HDMI

5、software) Update the software for the MAIN microprocessor and the HDMI microprocessor. 1. Firstly, check the version of each software. (For how to check the version, see the Service Manual on Page 10.) 2. Update Software and Part No. _ CONFIDENTIALITY NOTICE: The information contained in this docume

6、nt is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure,

7、dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 a) Firmware Ver - Main: SR6001_V08033

8、1_1.mot (For how to rewrite the MAIN, refer to the Service Manual on Page 39.) Parts No: 00M25CW499A03 b) Firmware Ver HDMI: HDMI_REPV2x080314h55.mot (For how to rewrite the HDMI, refer to the Service Manual on Page 49.) Parts No: 00M06CW499B06 Check the version for each (MAIN HDMI) software. If any

9、 of them has yet to be updated, please perform the latest update. Serial Number Range: Applicable Serial number range: Service code: 02 Serial number range of units corrected during production: Service Code: 03 Serial number example: MZXX1234567890 XX = Service Code _ CONFIDENTIALITY NOTICE: The inf

10、ormation contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库