Marantz-UD9004-sacd-mz09160-1 电路图 维修手册.pdf

《Marantz-UD9004-sacd-mz09160-1 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Marantz-UD9004-sacd-mz09160-1 电路图 维修手册.pdf（4页珍藏版）》请在收音机爱好者资料库上搜索。

1、 100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ09-160-1 Date: February 16, 2010 _ Model: UD9004 Subject: Correction of the firmware of DPMS Countermeasure is applicable only upon claim from the customer. Symptom: 1) The menu of special BD disc Mushi-shi 26-tan (Japanese animation) AV

2、XA-290459 is not displayed. 2) Sleeping Beauty (BD Disc) will not play without an SD card inserted in player. 3) A communication of CEC does not work when the unit connects to a plasma TV (KRP-500A: Pioneer). 4) Disc OPERATION WALKRE and The Wrestler can not play. 5) Start playback only DVD-Audio di

3、sc automatically when operate SETUP. 6) When play a DVD-AUDIO, if push STOP button twice then open SETUP-menu then close then push a PURE-DIRECT button to change the mode to OFF-ON- OFF, a HDMI indicator blink and a audio and picture does not out from HDMI. 7) When play a 1080P/24 contents, picture

4、is not output. 8) When play a DER ROSENKAVALIER (BD Disc) and Leon: The Professional (BD Disc), can not chapter search correctly. 9) The black belt might output under the picture when the layer of the DVD disc changes. 10) When a UD9004 turns off the power during version update, the version update i

5、s not possible. 11) The phenomenon that audio out data does channel swap of might occur. 12) An HDMI picture may not change from a black picture. 13) When setting of BD Audio Mode turn on the power in Mix Audio Output, the sound might be not output from SBL/SBR. _ CONFIDENTIALITY NOTICE: The informa

6、tion contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. A

7、ny distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 Solution

8、: We corrected the firmware so that no malfunction occurs. Please do not use a Proxy for updating in the Network environment! If customer uses setting of Proxy, the unit doesnt update the firmware properly If customer updated the firmware once via DPMS or CD-R, customer can update the firmware with

9、Proxy in the Network environment. Caution: It is necessary to initialize the unit before the update work begins. The customer has to initialize their BD/DVD Player. Please update the firmware after you confirm this matter to the customer beforehand. Updating the firmware *For update procedures, plea

10、se see manual. *Please do not turn off the Power of the unit during the update operation. Confirmation of the version: 1) Press the OPEN/CLOSE button and open the Disc Tray. 2) Remove the Disc from the Tray. 3) Please confirm! NO DISC on the FL Display. 4) Please turn off the power and unplug the AC

11、 cord. 5) Please insert the AC cable of unit into the power outlet while pressing the OPEN/CLOSE and PLAY buttons on the unit simultaneously. 6) The indication of PLAY and PAUSE will be displayed on FL Display. 7) Please confirm! NO DISC on the FL Display, and wait 10 seconds. 8) Press the buttons o

12、n the remote control in the order of 3, 2, 6 and 5. 9) The version of the firmware will be indicated on the FL Display. 10) The firmware list will also be shown on connected TV (GUI). 11) Push the UP button of cursor button, version of the each firmware will be indicated on the FL Display. METHOD OF

13、 UPDATE by CD-R with firmware Please record each program file on a blank CD-R separately, and update the unit upon claim. * Program Files to be supplied in SDI: Notice, upon recording the Disc: _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by

14、MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this documen

15、t and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. a) When recording the supplied file on the blank CD-R, the format shall be ISO9660 and the session sh

16、all be CLOSE. RadioFans.CN 收音机爱 好者资料库 b) When recording the supplied file on the disc, please use the lowest recording speed that is available on your PC. If the file is recorded at a higher speed, the rewriting operation may fail due to improperly recorded data on the disc. Rewriting procedures of

17、the SYSTEM ROMs. (1) Download the 9004_SYS.ROM firmware in SDI. (2) Please make DM_FM_UP folder on PC. (3) Please insert the 9004_SYS.ROM firmware into DM_FM_UP folder. (4) Please burn the CD-R by at once mode. (5) Turn the Power Supply of the unit on. Press the OPEN/CLOSE button and open the Disc T

18、ray. (6) Put the recorded CD-R on the Disc Tray and press the buttons on the remote control in the order of 7, 9, 2 and ENTER. (7) The Disc Tray will close automatically. (8) The FL Display indicates progress of updating. Time necessary for update: approximately 5 min. (9) The unit turns off and tur

19、ns on, and then NO DISC is indicated. (10) The new firmware is installed completely. (11) Press the OPEN/CLOSE button and open the Disc Tray. (12) Take out the CD-R from the Disc Tray. Rewriting procedures of the FE/BE ROMs. (1) Download the DcmUpdate.fw and DcmAuthentication firmware in SDI. (2) Pl

20、ease insert the DcmUpdate.fw and DcmAuthentication firmware into the Root directory. (3) Please burn the CD-R by at once mode. (4) Turn the Power Supply of the unit on. Press the OPEN/CLOSE button and open the Disc Tray. (5) Put the recorded CD-R on the Disc Tray and press the buttons on the remote

21、control in the order of 7, 9, 2 and RETURN. (6) The Disc Tray will close automatically. (7) The FL Display indicates LOADING, then progress of updating. Time necessary for update: approximately 30 min. (8) The new firmware is installed completely. _ CONFIDENTIALITY NOTICE: The information contained

22、in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution

23、, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 (9) The Disc Tray opens

24、 automatically. (10) Take out the CD-R from the Disc Tray. Confirmation of the version: (1) Press the OPEN/CLOSE button and open the Disc Tray. (2) Remove the Disc from the Tray. (3) Please confirm! NO DISC on the FL Display. (4) Please turn off the power and unplug the AC cord. (5) Please insert th

25、e AC cable of unit into the power outlet while pressing the OPEN/CLOSE and PLAY buttons on the unit simultaneously. (6) The indication of PLAY and PAUSE will be displayed on FL Display. (7) Please confirm! NO DISC on the FL Display, and wait 10 seconds. (8) Press the buttons on the remote control in

26、 the order of 3, 2, 6 and 5. (9) The version of the firmware will be indicated on the FL Display. (10) The firmware list will also be shown on connected TV (GUI). (11) Push the UP button of cursor button, version of the each firmware will be indicated on the FL Display. The version of new firmware S

27、erial Number Range: Please apply the above modification to the models in the following serial numbers. (Full-Digit) *000001 *000170 _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This d

28、ocument may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document.