Pioneer-DVJX1-dvd-sm电路图 维修手册.pdf

《Pioneer-DVJX1-dvd-sm电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Pioneer-DVJX1-dvd-sm电路图 维修手册.pdf（136页珍藏版）》请在收音机爱好者资料库上搜索。

1、 ORDER NO. PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01

2、, Singapore 159936 PIONEER CORPORATION 2004 DVJ-X1 RRV2878 DVD PLAYER DVJ-X1 THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S). ModelTypePower RequirementRegion No.Remarks DVJ-X1KUC AC120V 1 For details, refer to Important symbols for good services T-ZZR JUNE 2004 printed in Japan Radi

3、oFans.CN 收音机爱 好者资料库 DVJ-X1 2 1234 1234 C D F A B E SAFETY INFORMATION This service manual is intended for qualified service technicians ; it is not meant for the casual do-it- yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely

4、repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so

5、 and refer the repair to a qualified service technician. WARNING This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California o causet cancer, birth defects or other reproductive harm. Health a loop-out point is set automatically and

6、loop play begins be- tween the two points. 6. CUE/LOOP CALL button Press to turn cue point navigation mode ON/OFF. 1234 5678910 40414243 44454647 48 49 50 51 52 53 54 11 12 13 15 14 16 17 18 19 20212223242526 28 30 29 32 33 34 35 36 37 38 39 31 27 7. STOP button Stops disc playback. When the eject/s

7、top mode select switch is set to LOCK, playback will not stop unless the PAUSE mode is set first. 8. Eject/stop mode select switch (UNLOCK/LOCK) UNLOCK: If the EJECT (0) button is pressed during playback, the disc stops and is ejected. If the STOP button is pressed during playback, the disc playback

8、 stops. LOCK: If the EJECT (0) button is pressed dur- ing playback, the disc will not be ejected. To eject the disc, set the unit to pause, then press the EJECT (0) button. Likewise, playback will not stop if the STOP button is pressed during playback; to stop disc playback, set the unit to pause, t

9、hen press the STOP button. 9. EJECT (0) button When this button is pressed, disc rotation stops and the disc is ejected from the loading slot. If the eject/stop mode select switch is set to the LOCK position, the disc will not be ejected un- less the unit is set to pause before pressing the EJECT (0

10、) button 10.Mode select switch (MODE NORMAL/DJ) Located on the rear panel. 11. TOUCH/BRAKE response dial Adjusts the disc deceleration speed (time to playback stop) when the jog dials top surface is touched with jog mode set to VINYL ON. Ro- tate the dial counterclockwise to stop playback quickly, a

11、nd rotate dial clockwise to cause slower deceleration. 12. RELEASE/START response dial Adjusts the disc acceleration speed (playback startup time) when the jog dials top surface is released with jog mode set to VINYL ON. Ro- tate the dial counterclockwise to restart play- back quickly, and rotate di

12、al clockwise to cause slower acceleration. 13. HYPERJOG MODE button/indicator When hyper jog mode is set to ON with jog mode set to VINYL ON, turning the jog dial causes the rate of change of image and sound to increase to 2x the rate of changed normally produced (when the hyper jog mode is OFF). Bu

13、ttons and controls with the mark are disabled when the mode select switch is set to NORMAL. Buttons and controls with the mark are disabled when the mode select switch is set to DJ. 14. JOG MODE select button Each time pressed, sets VINYL mode alternately ON/OFF. VINYL mode ON: If surface of jog dia

14、l is touched during playback, playback stops, and if the dial is then rotated, image and sound are output in response to the amount of rotation. (if the angled surface of the jog dial is rotated without touching the top, pitch bend opera- tion is enabled.) The current jog mode is memorized even when

15、 power is turned off. VINYL mode OFF: The above operations are disabled even when the jog dials surface is touched. 15.VINYL mode indicator Lights when the jog mode is set to VINYL mode. 16.TEMPO control range select button Each time this button is pressed, the TEMPO control sliders vari- able range

16、 changes (6%, 10%, 16%, WIDE). When WIDE is selected, the variable range is +70 to 100% for DVD playback, and 100% for CD playback. DVJ-X1 133 5678 56 7 8 C D F A B E 17.TEMPO control range indicator (6, 10, 16, WIDE) When control range is set to 6%, the 6 indicator lights. When control range is set

17、 to 10%, the 6 and 10 indicators light. When control range is set to 16%, the 6, 10 and 16 indica- tors light. When control range is set to WIDE, the 6, 10, 16 and WIDE indicators light. 18.MASTER TEMPO button/indicator Each time this button is pressed, the master tempo function turns alternately ON

18、/OFF. 19.TEMPO control slider When pulled forward (+), playback tempo is accelerated, and when pushed away (), tempo is slowed. 20.TEMPO RESET indicator When lighted, indicates that the playback tempo is set to normal tempo “0”, regardless of the position of the TEMPO control slider. 21.TEMPO RESET

19、button Pressing this button instantly resets the playback tempo to “0” (nor- mal tempo), regardless of the current position of the TEMPO control slider. Press the button once again to cancel the reset. 22.Jog dial display 23.Jog dial (FWD+/REV) 24.Disc loading slot 25.Forced eject hole 26.Memory car

20、d eject button Press to remove memory card. Do not press when the memory card indicator is lighted. 27.Memory card slot 28.Memory CARD indicator Lights when unit is accessing the memory card. Do not remove memory card or turn off power when this indicator is lighted. 29.PLAY/PAUSE indicator Lights d

21、uring playback, and flashes during pause mode. 30. PLAY/PAUSE (3/8) button 31.CUE indicator Lights to indicate a cue point has been set, except during search mode. Flashes during pause mode. 32.CUE button Cue point setting Back cue Cue point sampler 33.Manual search buttons (REV1, FWD1) 34.Track sea

22、rch buttons (PREVIOUS4 , NEXT ) Use to return or advance play (unit of movement is by tracks when playing CDs, and by chapters when playing DVDs). During DVD playback, use to return to menu page or change page. 35.REV indicator Lights when direction select switch is set to reverse. 36.DIRECTION FWD/

23、REV select switch Set to REV position for reverse playback. 37.HOT CUE REC MODE button Press to select the HOT CUE buttons function (record/call). Defaults to call mode when power is switched on. 38.HOT CUE (A, B, C) buttons/indicators A, B, or C indicator lights red to indicate hot cue point record

24、 mode. A, B, or C indicator lights green for hot cue point, and orange for hot cue point; when an indicator is lighted, call mode is enabled for that point; pressing the button initiates playback from the hot cue point. When indicator is not lighted, no hot cue point is recorded. 39.Title search but

25、tons (TITLE +/) During DVD playback, titles are forwarded or reversed in the direc- tion corresponding to the button pressed. 40.TIME MODE/AUTO CUE button TIME MODE: Each time the button is pressed, the time display switches alter- nately between playback elapsed time and remaining time (REMAIN). Th

26、e time mode remains set in memory even when power is turned off. AUTO CUE: Hold depressed for one second or more to set/release the auto cue function. Hold depressed for five seconds or more to switch the auto cue level . The auto cue ON/OFF setting and auto cue level remains set in memory even when

27、 power is turned off. 41.TEXT/WAVE select button When pressed in DJ mode, the display alternates between WAVE display and CD-TEXT display (disc title / track title). When pressed in NORMAL mode, alternates between CD-TEXT disc title / track title display. 42.DISPLAY button When pressed in DJ mode, t

28、urns the hot cue, cue point, and play- back time guide display ON/OFF on the monitor connected to the preview video output connector. When pressed in NORMAL mode, turns the disc information guide display ON/OFF. When power is switched ON, the display function defaults to ON when the unit is in the D

29、J mode, and OFF (no display) in the NOR- MAL mode. 43.ANGLE button Press to change the viewing angle during DVD playback (on sup- ported discs only). In DJ mode, when the angle is changed both video and audio playback temporarily stop (due to writing to buffer memory). 44.SUBTITLE button During DVD

30、playback, press to alternately turn subtitle display ON/ OFF (on supported discs only). This function is disabled in DJ mode. 45.AUDIO button During DVD playback, press this button to change language or audio channel (on supported discs only). In DJ mode, when the language/audio channel is changed,

31、both video and audio playback temporarily stop (due to writing to buffer memory). 46.DELETE button Press to delete cue points and loop points recorded in SD memory card. 47.MEMORY button Press to store cue points or loop points in SD memory card. 48.Display 49.MENU button Press to display DVD menu.

32、50.Top menu (T.MENU) button Press to display a DVDs top menu level. 51.SETUP button Press to display the setup menu. 52.Return (RET.) button When setup or other menus are displayed, press this button to re- turn to the previous menu or item. 53.Cursor button (2/3/5/) Press to select cue points navig

33、ation and DVD menu settings. 54.ENTER button Press to confirm cue point navigation and various DVD input set- tings. DVJ-X1 134 1234 1234 C D F A B E 123 4 5 6 7 8 9101112131415 29 28 27 26 25 24 23 222120 19181617 Display 1. Title number (TITLE 00-99) Indicates the DVD title number. Not displayed d

34、uring CD playback. 2. Chapter number (CHP 000-999) Indicates the DVD chapter number. “CHP” is not displayed during CD playback. 3. Track number (TRACK 00-99) Indicates CD track number. “TRACK” is not displayed during DVD playback. 4. Prohibited indicator ( ) Some DVD discs or players do not support

35、certain functions or op- erations; if an effort is made to perform such operations, this indica- tor appears for about 2 seconds. 5. Angle indicator () During DVD playback, this mark appears to indicate a scene with variable angle. 6. Auto cue (A.CUE) indicator Lights when auto cue is ON. Does not l

36、ight during NORMAL mode. 7. Remaining time (REMAIN) indicator Indicates that the current numerical display is of a tracks remaining time. 8. SRS indicator () Lights when TruSurround function is selected. This function is disa- bled in DJ mode. 9. Disc indicator () Lights during display of a CD TEXT

37、disc title. 10.Minutes display (000-999 M) 11.Seconds display (00-59 S) 12.Frame display (00-74 F) Display audio frame numbers. 75 frames are equivalent to one sec- ond of normal play. Not displayed in NORMAL mode. 13.Video frame display (00-29 VIDEO F) Lights during DVD playback in DJ mode. 30 fram

38、es are equivalent to one second. Video frame display does not appear during CD play- back and in NORMAL mode. Since this unit controls video frames (1/30 second) based on the audio frame (1/75 second), combining the two will result in a maxi- mum deviation of 1 frame. 14.TEMPO indicator Displays tem

39、po variation produced when TEMPO control slider is operated. 15.EJECT LOCK indicator Lights when eject/stop mode select switch is set to LOCK position. If the EJECT (0) button or STOP button is pressed when this indica- tor is lighted, the indicator will flash for about 2 seconds. 16.Tempo control r

40、ange display (6, 10, 16, WIDE) Lights to indicate the TEMPO control sliders variable range as se- lected with the tempo control range select button. Does not light in NORMAL mode. 17.Master tempo indicator (MT) Lights when master tempo function is ON. Does not light in NORMAL mode. 18.BPM counter di

41、splay Lights to indicate the beats per minute (BPM) of the currently play- ing track. Some tracks may not be measurable with the automatic BPM counter. Does not light in NORMAL mode. 19.Dot matrix display (50 x7 dots) Used to display CD TEXT, WAVE display, guide messages and other data. In the case

42、of CD TEXT, the maximum number of alpha-nu- meric characters that can be displayed is 72 for disc titles and 48 for track titles (when a display exceeds 9 characters in length, the dis- play will scroll). In the case of WAVE display, the varying volume levels of the currently playing track are displ

43、ayed, with the track sized to fit into the entire 50-dot display width. For guide messages, “Dot Matrix Guide Display Mes-sages”. 20.Play address display Displays a bar graph to allow an immediate visual grasp of the elapsed and remaining playing time of the currently playing track. The full scale b

44、ar length indicates the full track length. The bar graph is off at the beginning of the track, and lights from left to right. The bar graph is lighted at the beginning of the track, and goes out from left to right. When the remaining playing time falls below 30 seconds, the bar graph flashes slowly;

45、 when less than 15 seconds are left, the bar graph flashes quickly. 21.Cue memory indicator (M.CUE) The selected chapter or tracks cue memory position is indicated by the indicators beneath the play address display. Even if multiple memory points are located within the same block, only a single indi

46、- cator lights. Does not light in NORMAL mode. 22.Loop memory indicator (M.LOOP) Displays the loop memory position for the selected track immedi- ately above the playback address display. Even if multiple memory points are located within the same block, only a single indicator lights. Does not light

47、 in NORMAL mode. 23.RELOOP indicator Lights when loop-in points and loop-out points have been recorded and loop playback is possible, as well as during loop play operation itself. Does not light in NORMAL mode. 24.EMERGENCY LOOP indicator Lights during loop operation in emergency loop mode. Does not

48、 light in NORMAL mode. 25.DTS indicator Lights during playback when DTS audio has been selected. Not supported in DJ mode. 26.GUI indicator Lights when setup menu, image adjust, disc information and other onscreen menus are displayed. 27.Dolby Digital indicator ( D) Lights during playback when Dolby

49、 Digital audio has been selected. 28.Disc type indicator (DVD/CD) Lights to indicate the type of disc being played. 29.Reverse indicator (REV) Lights to indicate the Direction select switch is set to reverse (REV) position. Does not light in NORMAL mode. 2 DVJ-X1 135 5678 56 7 8 C D F A B E Jog dial display 30.Operation display Displays play position, with one revolution equivalent to 135 frames. The display rotates during playback, and stops during pause. 31.Cue point position display Displays the position of cue points. 32.Audio/video memory status dis