Panasonic-SAPT960P-htss-sm 电路图 维修手册.pdf

《Panasonic-SAPT960P-htss-sm 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Panasonic-SAPT960P-htss-sm 电路图 维修手册.pdf（158页珍藏版）》请在收音机爱好者资料库上搜索。

1、Main unit SA-PT960P/PC ? ?GENERAL Power supply:AC 120 V, 60 Hz Power consumption:This unit 135 W Power consumption in standby mode: approx. 0.3 W Dimensions (WHD):430 mm63 mm327 mm(16- 15/16” X 2-11/16” X 12-7/8”) Mass:This unit 3.7 kg Operating temperature range:+0 C to +40 C (+32 F to +95 F) Opera

2、ting humidity range:35 % to 80 % RH (no condensation) ? ?AMPLIFIER SECTION RMS Output Power: Dolby Digital Mode Front Ch: 250 W per channel (6 ), 1 kHz, 10% THD Surround Ch: 125 W per channel (3 ), 1 kHz, 10% THD 2008 Matsushita Electric Industrial Co. Ltd. All rightsreserved.Unauthorizedcopyingand

3、distribution is a violation of law. SA-PT960P SA-PT960PC Colour (K).Black Type Center Ch: 250 W per channel (6 ), 1 kHz, 10% THD Subwoofer Ch: 250 W per channel (6 ), 100 Hz, 10 % THD Total RMS Dolby Digital mode power: 1250 W FTC Output Power: Dolby Digital Mode Front Ch: 104 W per channel (6 ), 12

4、0Hz to 20 kHz, 1% THD Surround Ch: 34 W per channel (3 ), 120Hz to 20 kHz, 1% THD Center Ch: 101 W per channel (6 ), 120Hz to 20 kHz, 1% THD Subwoofer Ch: 106 W per channel (6 ), 45 Hz to120 Hz, 1 % THD Total FTC Dolby Digital mode power: 483 W ? ?FM TUNER, TERMINALS SECTION DVD Home Theater Sound S

5、ystem Notes: This models CD/DVD mechanism is CR14. Please refer to the original service manual (Order No. MD0801004CE) for this mechanism. Specifications ORDER NO. MD0802007CE A6 RadioFans.CN 收音机爱 好者资料库 Preset Memory:FM 30 stations AM 30 stations Frequency Modulation (FM) Frequency range: 87.90-107.

6、90 MHz (200-kHz step) 87.50-108.00 MHz (100-kHz step) Antenna terminals:75 (unbalanced) Amplitude Modulation (AM) 520kHz to 1710kHz (10-kHz step) Digital audio input Optical digital input:Optical terminal Sampling frequency:32 kHz, 44.1 kHz, 48 kHz Phone jack Terminal:Stereo, 3.5 mm (1/8”) jack ? ?D

7、ISC SECTION Discs played 8 cm (3”) or 12 cm (5”): (1) DVD (DVD-Video) (2) DVD-RAM (DVD-VR, MP3*2, 5, JPEG*4, 5) (3) DVD-R (DVD-Video, DVD-VR, MP3*2, 5, JPEG*4, 5) (4) DVD-R DL (DVD-Video, DVD-VR) (5) DVD-RW (DVD-Video, DVD-VR, MP3*2, 5, JPEG*4, 5) (6) +R/+RW (Video) (7) +R DL (Video) (8) CD, CD-R/RW

8、 CD-DA, Video CD, SVCD*1, MP3*2, 5, WMA*3, 5, JPEG*4, 5 *1 Conforming to IEC62107 *2 MPEG-1 Layer 3, MPEG-2 Layer 3 *3 Windows Media Audio Ver.9.0 L3 ?Not compatible with Multiple Bit Rate (MBR) *4 Exif Ver 2.1 JPEG Baseline files ?Picture resolution: between 160 x 120 and 6144 x 4096 pixels (Sub sa

9、mpling is 4:0:0, 4:2:0, 4:2:2 or 4:4:4). Extremely long and narrow pictures may not be displayed. *5 The total combined maximum number of recognizable audio and picture contents and groups: 4000 audio and picture contents and 400 groups. Pick up Wavelength (DVD/CD):655/785 nm Laser power (DVD/CD)(PC

10、):CLASS 1/CLASS 1M (Canada) CLASS II/CLASS I (U.S.A) Audio output (Disc) Number of channels:5.1 ch (FL, FR, C, SL, SR, SW) ? ?VIDEO SECTION Video system:NTSC Composite video output Output level:1 Vp-p (75 ) Terminal:Pin jack (1 system) Component Video Output ? ?Y output level:1 Vp-p (75 ) ? ?PBoutpu

11、t level:0.7 Vp-p (75 ) ? ?PRoutput level:0.7 Vp-p (75 ) ? ?Terminal:Pin jack (Y: green, PB: blue, PR: red) (1 system) HDMI AV output Terminal:19pin type A connector HDAVI Control: This unit supports “HDAVI Control 3” function. Note: 1.Specifications are subject to change without notice. Mass and dim

12、ensions are approximate. 2.Total harmonic distortion is measured by the digital spectrum analyzer. Solder: This model uses lead free solder (PbF). Mechanism: This model uses CR14 mechanism. Wireless Features: This model supports multi room wireless sound system (SH- FX85). Refer to their respective

13、original service manuals for *1. 2 SA-PT960P / SA-PT960PC RadioFans.CN 收音机爱 好者资料库 1 Safety Precautions 5 1.1. GENERAL GUIDELINES 5 1.2. Before Repair and Adjustment 5 1.3. Protection Circuitry 6 1.4. Safety Parts Information 6 2 Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensit

14、ive (ES) Devices 8 3 Precaution of Laser Diode 9 4 About Lead Free Solder (PbF) 10 4.1. Service caution based on legal restrictions 10 5 Handling Precautions for Traverse Unit 11 5.1. Cautions to Be Taken in Handling the Optical Pickup Unit 11 5.2. Grounding for electrostatic breakdown prevention 11

15、 6 Accessories 13 7 Operation Procedures 14 7.1. Remote Control Key Buttons Operations 14 7.2. Main Unit Key Buttons Operations 15 7.3. Using the VIERA Link “HDAVI Control” 16 7.4. Using the iPod 18 7.5. Audio and Video Connection 20 7.6. Disc Information 22 8 Self-Diagnosis and Special Mode Setting

16、 24 8.1. Service Mode Summary Table 24 8.2. Service Mode Table (For DVD) 24 8.3. Service Mode Table (For CR14) 31 CONTENTS Page Page 3 SA-PT960P / SA-PT960PC RadioFans.CN 收音机爱 好者资料库 8.4. Wireless Service Mode Summary Table 33 8.5. Service Mode Table (Wireless) 34 8.6. DVD Self Diagnostic Function-Er

17、ror Code 36 8.7. Sales Demonstration Lock Function 40 8.8. Service Precautions 41 9 Assembling and Disassembling 43 9.1. Disassembly Flow Chart 45 9.2. Main Components and P.C.B. Locations 46 9.3. Disassembly of Top Cabinet 47 9.4. Disassembly of Rear Panel 47 9.5. Disassembly of (CR14) Mechanism Un

18、it 47 9.6. Disassembly of Front Panel 48 9.7. Disassembly of Panel P.C.B. 49 9.8. Disassembly of Power/Disc Button P.C.B. 49 9.9. Disassembly of DVD Lid 49 9.10. Disassembly of Ipod Cradle P.C.B. 50 9.11. Disassembly of AC Inlet P.C.B. 51 9.12. Disassembly of Main P.C.B. 52 9.13. Disassembly of D-Am

19、p P.C.B. 53 9.14. Replacement of Digital Amp IC (IC5000) 54 9.15. Replacement of Digital Amp IC (IC5200) 55 9.16. Replacement of Digital Amp IC (IC5300) 56 9.17. Replacement of Digital Amp IC (IC5400) 58 9.18. Disassembly of SMPS P.C.B. 59 9.19. Replacement of Switch Regulator IC (IC5701) 59 9.20. R

20、eplacement of Switch Regulator Diode (D5702) 60 9.21. Replacement of Regulator Diode (D5801) 62 9.22. Replacement of Regulator Diode (D5802) 62 9.23. Replacement of Regulator Diode (D5803) 63 9.24. Disassembly of Power Supply P.C.B. 64 9.25. Replacement of Regulator IC (IC2903) 65 9.26. Disassembly

21、of DVD Module P.C.B. 66 9.27. Disassembly of Coprocessor P.C.B. 67 9.28. Disassembly of Wireless Adapter P.C.B. 67 10 Assembling and Disassembling of Mechanism Unit (CR14) 69 10.1. Disassembly of TRV unit 69 10.2. Assembly of TRV unit 70 11 Service Fixture and Tools 71 12 Service Position 72 12.1. C

22、hecking MAIN SOURCE (follows the selected source for the main room)(FMAM)*IPODReturn to MAIN SOURCE * * If the main room is in FM/AM mode, you can only select the same mode for the FM/AM tuner of the second room. For details, refer to the operating instructions for the optional Panasonic wireless so

23、und system SH-FX85. 3 5 6 18 7 9 12 10 2 11 13 20 8 21 24 22 23 25 14 16 15 19 1 4 17 Turn the main unit on/off Select channels a nd title numbers etc. / Enter numbers Select a disc / Play all loaded CDs sequentially Select preset radio stations Basic operations for play Show setup menu Show a disc

24、top menu or program list Select or confirm menu items / Frame-by-frame Show a disc menu or play list Select sound mode Turn Dolby Pro Logic II on/off Cancel Turn Whisper-mode Surround on/off or Set the Sleep timer Press and hold SLEEP. While the time is shown on the main units display, press SLEEP r

25、epeatedly. SLEEP 30SLEEP 60SLEEP 90SLEEP120 OFF (Cancel) To confirm the remaining time, press and hold the button again. TV operations Aim the remote control at the Panasonic TV and press the button. TV:Turn the TV on/off TV/VIDEO:Change the TVs video input mode +, - :Adjust the TV volume This may n

26、ot work properly with some models. Select iPod as the source Adjust the volume of the main unit Select radio stations manually Start up and play a disc automatically Show START menu Show on-screen menu Return to previous screen Switch information on the main units display Select the play mode / Set

27、the repeat mode Mute the sound MUTING flashes on the main units display while the function is on. To cancel, press the button again or adjust the volume. Muting is canceled when you switch the unit to standby. Adjust the subwoofer level or select speaker channel Other Panasonic audio/video equipment

28、 may start functioning when you operate the unit using the supplied remote control. You can operate this unit in another mode by setting the remote control operating mode to REMOTE 2. The main unit and remote control must be set to the same mode. 1.Press and hold on the main unit and 2 on the remote

29、 control until the main units display shows REMOTE 2. 2.Press and hold OK and 2 on the remote control for at least 2 seconds. To change the mode back to REMOTE 1, repeat both steps above by replacing 2 and 1. Avoiding interference with other Panasonic equipment / AUTO OPERATION ON/OFF indicator The

30、indicator lights red when the wireless system is turned on and lights green when the wireless link is activated. When the wireless link is inactive for along time, it turns red. Unit on/off button POWER Use this button to turn the wireless system on and off. : This unit is on. : This unit is off. ,

31、14 SA-PT960P / SA-PT960PC 7.2. Main Unit Key Buttons Operations 15 13 8 9 11 12 10 1 4 3 6 5 7 2 Standby/on switch POWER / Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 5 DISC SELECTOR Select a disc directly Disc

32、 exchange Open the disc tray to exchange the disc. Open/Close the disc tray Turn Subwoofer Boost on/off Select the source DVD/CDFMAMAUXD-INIPOD Skip or slow-search play / Select the radio stations Stop playing / Select the tuning mode / Adjust the FM reception condition Play discs / Memorize the rec

33、eiving radio stations Connect iPod Remote control signal sensor Display 14Jog LED Adjust the volume of the main unit Connect headphones (no t included) Headphone plug type: 3.5 mm (1/8z ) stereo mini plug Reduce the volume before connecting. Audio is automatically switched to 2-channel stereo. To pr

34、event hearing damage, avoid listening for prolonged periods of time. 15 15 SA-PT960P / SA-PT960PC 7.3. Using the VIERA Link “HDAVI Control” VIERA Link HDAVI Control VIERA LinkTM is a new name for EZ SyncTM. VIERA Link HDAVI Control is a convenient function that offers linked operations of this unit,

35、 and a Panasonic TV (VIERA) under HDAVI Control . You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected equipment for operational details. VIERA Link HDAVI Control , based on the control functions provided by HDMI which is an industry

36、 standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers equipment that supports HDMI CEC cannot be guaranteed. This unit supports HDAVI Control 3 function. HDAVI Control 3 is the newest standar

37、d (current as of December, 2007) for Panasonics HDAVI Control compatible equipment. This standard is compatible with Panasonics conventional HDAVI equipment. Please refer to individual manuals for other manufacturers equipment supporting VIERA Link function. The TV with HDAVI Control 2 (or later) fu

38、nction enables the following operation: VIERA Link Control only with TVs remote control for HDAVI Control 2 (or later) Preparation Confirm that the HDMI connection has been made Set VIERA Link to ON To complete and activate the connection correctly, turn on all VIERA Link HDAVI Control compatible eq

39、uipment and set the TV to the corresponding HDMI input mode for this unit. Setting the TV audio for VIERA Link HDAVI Control Select between AUX and D-IN to work with the linked operations. Confirm the audio connection to the AUX terminal (for AUX) or OPTICAL IN terminal (for D-IN ) 1Press ,SELECT to

40、 select AUX or D-IN . 2Press SETUP to select TV AUDIO , then press , to switch AUX or D-IN . Whenever the connection or settings are changed, reconfirm the points above. Automatic setup The settings for TV ASPECT * 1and LANGUAGE* 2 automatically follow to the settings of the TV. (This may not work i

41、f the corresponding setting you have made for your TV is not available on this unit.) * * 1 When using VIERA Link HDAVI Control with HDAVI Control 3 compatible TV * 2 When using VIERA Link HDAVI Control with HDAVI Control 2 (or later) compatible TV You can turn on this unit and the TV, and start pla

42、ying the disc with a single press of a button. This function also works if you press PLAY on this units remote control when this unit is in standby mode. Playback may not be immediately displayed on the TV. If you miss the beginning portion of playback, press or to go back to where playback started.

43、 When you switch the TV input to TV tuner mode, this unit will automatically switch to AUX * or D-IN*. (This does not work when this unit is in IPOD mode.) When you start disc play, the TV will automatically switch its input mode for this unit. When the TV is turned off, this unit goes into standby

44、mode automatically. This function works only when DVD/CD , AUX * or D-IN* is selected as the source on this unit. When the TV is turned on, this unit does not turn on automatically. (Power on link is not available.) When you press , only this unit turns off. Other connected equipment compatible with

45、 VIERA Link HDAVI Control stays on. * “AUX” or “D-IN” (“DIGITAL IN”) works depending on the “TV AUDIO” setting (above, Setting the TV audio for VIERA Link “HDAVI Control”). PLAY SKIPSLOW/SEARCH SOUND -SLEEP-CH SELECT W.S. FL DISPLAY PLAY LIST MENURETURN ONE TOUCH PLAYSETUP VOL VOL 1 PAUSE 23 56 89 0

46、10 4 7 DISC DVD -2ND SELECT FM/AMiPod TV TV / VIDEO PL SELECT SUBWOOFER LEVELMUTING S T A R T SKIP SLOW / SEARCH F U N C T I O N S -CD MODE -PLAY MODE -REPEAT CANCEL STOPPLAY OK T O P M E N U SETUPONE TOUCH PLAY SELECT, One touch play To start disc playback. This units speakers will be automatically

47、 activated Auto input switching Power off link ONE TOUCH PLAY will Note Note 16 SA-PT960P / SA-PT960PC You can select whether audio is output from this units speakers or the TV speakers by using the TV menu settings. For details, refer to the operating instructions of your TV. Home theater This unit

48、s speakers are active. When this unit is in standby mode, changing the TV speakers to this units speakers in the TV menu will automatically turn this unit on and select AUX * or D-IN* as the source. The TV speakers are automatically muted. You can control the volume setting using the volume or mute

49、button on the TVs remote control. (The volume level is displayed on the main units FL display.) To cancel muting, you can also use this units remote control If you turn off this unit, TV speakers will be automatically activated. TV TV speakers are active. The volume of this unit is set to 0 . This function works only when DVD/CD , AUX * or D-IN is selected as the source on this unit. Audio output is 2-channel audio. When switching between thi