Pioneer-CDJ800MK2-cd-sm2 电路图 维修手册.pdf

《Pioneer-CDJ800MK2-cd-sm2 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Pioneer-CDJ800MK2-cd-sm2 电路图 维修手册.pdf（228页珍藏版）》请在收音机爱好者资料库上搜索。

1、 ORDER NO. PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01

2、, Singapore 159936 PIONEER CORPORATION 2006 CDJ-800MK2 RRV3364 COMPACT DISC PLAYER CDJ-800MK2 THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S). ModelTypePower RequirementRemarks CDJ-800MK2KUCXJAC 120 V CDJ-800MK2WYXJ5AC 220 240 V CDJ-800MK2RLFXJAC 110-120 V / 220-240 V For details, re

3、fer to Important symbols for good services . T-ZZR JUNE 2006 printed in Japan RadioFans.CN 收音机爱 好者资料库 CDJ-800MK2 2 1234 1234 C D F A B E SAFETY INFORMATION This service manual is intended for qualified service technicians ; it is not meant for the casual do-it- yourselfer. Qualified technicians have

4、 the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perfo

5、rm the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician. WARNING This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to causecancer, birth

6、defects or other reproductive harm. Health when playing MP3, the variable range with WIDE is 16 %. 17.MASTER TEMPO button/indicator When pressed, the master tempo function alter nates ON/OFF. 18.TEMPO adjust slider When moved toward the user (+ front), the track tempo increases, and when moved away

7、from the user ( rear), the tempo decreases. 19.Jog dial display 20. Jog dial (+FWD/REV) 21.Disc loading slot 22.Forced eject hole 23. Play/pause indicator (?) Lights during playback, and flashes during pause mode. 24. PLAY/PAUSE button (?) 25.CUE indicator Lights when a Cue point is set. Flashes in

8、pause mode. 26.CUE button Cue point setting Back cue Cue point sampler 27. SEARCH buttons (?, ?) CDJ-800MK2 141 5678 56 7 8 C D F A B E 3635 32313334 28. TRACK SEARCH buttons (?, ?) 29. Reverse button / indicator (REV) When this button is pressed, its indicator lights and the unit is set to reverse

9、play. 30. AUTO BEAT LOOP buttons / indicators (1, 2, 4, 8) (1/8, 1/4, 1/2, 1/1) When this button is pressed, auto loop play is performed based on the tracks BPM (1 beat, 2 beats, 4 beats or 8 beats). When a loop has been set manually, the button operates as a loop shortening button. (1=1/8, 2=1/4, 4

10、=1/2, 8=1/1). Rear Panel 31. AC inlet (AC IN) Use the accessory power cord to connect this inlet to a standard AC power outlet. 32. POWER ?OFF/?ON switch 33.CONTROL connector When the accessory control cord is used to connect this connector to the corresponding CONTROL connector on a Pioneer DJ mixe

11、r, the DJ mixer can be used to control the CD player for fader start play and back cue. Also, by connecting this connector to the CONTROL connector on another Pioneer DJ CD player, automatic relay play can be performed. 34. DATA IN/OUT connector When a commercially available miniplug cord (or the ac

12、cessory con- trol cord) is used to connect this jack to the same jack on another CDJ-800MK2, recorded data such as cue points and loop points can be copied from one player to the other. 35. AUDIO OUT L, R connectors RCA-type analog audio output jacks. 36. DIGITAL OUT connector RCA type coaxial digit

13、al output connectors used to connect a DJ mixer or AV amplifier, CD player, etc., equipped with digital input connectors. The digital outputs here support all DJ and other func- tions, but only audio data is output (without subcodes; CD graphics are not supported). ? CDJ-800MK2 142 1234 1234 C D F A

14、 B E 71 72 73 74 75 Jog dial display Display Section 51525354555658 6162605963 57 51. Track number/folder number display (TRK/FLD) When playing an audio CD, the TRK indicator lights, and the two- digit track number appears (01 to 99). When playing MP3, TRK lights and the track number is displayed in

15、 three digits (01 to 999). During folder search, the FLD indicator lights, and a two-digit folder number is displayed (00 to 99). 52. Auto cue indicator (A.CUE) Lights when auto cue is ON. 53. REMAIN indicator This indicator lights to indicate that tracks remaining time is being displayed. 54. Time

16、(minutes) display (M) 55. Time (seconds) display (S) 56. Frame display (F) Seventy-five frames equal one second. 57. TEMPO display Displays change in playing speed (tempo) caused by movement of the TEMPO adjust slider. 58. Tempo control range display (WIDE) Lights when TEMPO 10/WIDE button is set to

17、 WIDE. 59. To provided a quick grasp of the current tracks elapsed time and remaining playing time, the entire track is shown as a bar graph scaled over the entire width of the display. During elapsed time display, the bar graphs indicator segments turn on from left to right. During remaining time d

18、isplay, the bar graph indicator segments turn off from left to right. the graph flashes slowly; when less than 15 seconds remain, the flashing becomes quicker. 60. Memory point display If cue memory or loop memory has been recorded in the currently playing track, its relative starting position is di

19、splayed here. 61. Dot matrix display (7x5 dots by 9 segments) The dot matrix is used to display TEXT, guides and other information. Text up to 48 characters can be displayed (text longer than 8 charac- ters is scrolled). 62.BPM display (0 to 360 BPM) This display shows the Beats-Per-Minute (BPM) of

20、the currently play- ing track (detection range 70 to 180 BPM). The automatic BPM coun- ter may be unable to compute the correct BPM for some tracks. 63.Master tempo indicator (MT) Lights when the master tempo function is ON. 71.Operation display This display shows the relative playing position, with

21、 one revolution equivalent to 135 frames. During playback, the display rotates, and it stops during pause mode. 72.Cue point position indicator Indicates position of cue points. 73.Audio memory status indicator This indicator flashes during audio memory write, and lights when writing has been suffic

22、iently completed. When the indicator is flash- ing, it may not be possible to record real time cue points. The indica- to ralso flashes when memory insufficiency occurs due to scratch operation. 74.Jog touch detection indicator In VINYL mode, this indicator lights to indicate that the jog dial sur-

23、face has been touched. 75.VINYL mode indicator Lights during VINYL mode. Playing address display When a track has less than 30 seconds of remaining play time, CDJ-800MK2 143 5678 56 7 8 C D F A B E CDJ-800MK2 144 1234 1234 C D F A B E Lubricants and Glues list Cleaning DyefreeGEM1036 (ZLX-ME413A)Ref

24、er to 2.4 SLOT-IN MECHANISM SECTION GreaseGYA1001 (ZLB-PN397B)Refer to 2.3 CONTROL PANEL SECTION, 2.4 SLOT-IN MECHANISM SECTION GreaseGYA1007 (ZLB-PN348P)Refer to 2.4 SLOT-IN MECHANISM SECTION, 2.3 CONTROL PANEL SECTION NameNameLubricants and Glues No.Lubricants and Glues No.RemarkRemarkNameLubrican

25、ts and Glues No.Remark Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools: Pickup lenesesCleaning liquid : GEM1004 Cleaning paper : GED-008 Refer to 2.4 SLOT-IN MECHANISM SECTION , 7.1.5 DISASSEMBLY SECTION. Position to be cleanedPosition

26、 to be cleanedCleaning toolsCleaning toolsRemarkRemarkPosition to be cleanedCleaning toolsRemark ORDER NO. PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetbergl

27、aan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2006 RRV3475 T ZZS AUG. 2006 Printed in Japan COMPACT DISC PLAYER CDJ-800MK2 Model No.Order No.Remarks CDJ-800MK2/KUCXJRRV3364 This service manual should be used tog

28、ether with the following manual(s): THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S). ModelTypePower RequirementRemarks CDJ-800MK2WAXJ5AC 220 to 240 V For SPECIFICATIONS and PANEL FACILITIES, refer to the operating instructions. 2 1234 1234 C D F A B E CDJ-800MK2 CONTRAST OF PCB ASSEM

29、BLIES AC IN ASSYFE MarkSymbol and Description Part No. Remarks DWR1430DWR1429 AC Inlet 1PXKP3042XKP3041 DWR1429 and DWR1430 are constructed the same except for the following : 1. CONTRAST OF MISCELLANEOUS PARTS jpfy For the applying amount of lubricants or glue, follow the instructions in this manua

30、l. (In the case of no amount instructions, apply as you think it appropriate.) Parts marked by NSP are generally unavailable because they are not in our Master Spare Parts List. The mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacin

31、g, be sure to use parts of identical designation. Screws adjacent to mark on product are used for disassembly. Reference Nos. indicate the pages and Nos. in the service manual for the base model. NOTES: When ordering resistors, first convert resistance values into code form as shown in the following

32、 examples. Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%, and K=10%). 560 56 101561 .RD1/4PU 5 6 1 J 47k 47 103473 .RD1/4PU 4 7 3 J 0.5 R50 .RN2H R 5 0 K 1 1R0 .RS1P 1 R 0 K Ex.2 When there are 3 effective digits (such as in

33、high precision metal film resistors). 5.62k 562 1015621 .RN1/4PC 5 6 2 1 F CONTRAST TABLE Ref. Part No. No. MarkSymbol and DescriptionCDJ-800MK2CDJ-800MK2Remarks /KUCXJ/WAXJ5 PCB ASSEMBLIES NSPDISP AssyDWM2234DWM2233 P11-2 AC IN AssyDWR1430DWR14291 PACKING SECTION P9-1AC Power CordADG7021ADG7079 P9-

34、4Operating Instructions (English)DRB1401Not used P9-4Operating Instructions (English, Chinese)Not usedDRB1403 P9-12Packing CaseDHG2595DHG2597 P9-13NSPWarranty CardARY7043Not used P9-14NSPLabelDRW2311VRW1629 EXTERIOR SECTION P11-10Fuse(T1.6 A)AEK7075Not used P11-10Fuse(T0.8 A)Not usedREK1021 P11-17Po

35、wer TransfomerDTT1204DTT1203 NSPChassisDNK4518DNK4520 P11-38Laser Caution(7L)DRW2308Not used P11-38Caution Label(CHK)Not usedDRW2177 NSPCCC S it is not meant for the casual do-it- yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and saf

36、ely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to d

37、o so and refer the repair to a qualified service technician. WARNING This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to cause cancer, birth defects or other reproductive harm. Health when set to 100 WIDE, the button indic

38、ator lights. Each press of the button turns the master tempo function on or off. Slide the knob towards you (+) to increase the tempo and slide it away from you (-) to decrease it. Lights during play and flashes during pause. Lights when a Cue point is set. Flashes in pause mode. Cue point settings

39、Cue point sampler Back cue When this button is pressed, its indicator lights and the unit is set to reverse play. (MANUAL 1/8, 1/4, 1/2, 1/1) When this button is pressed, auto loop play is performed based on the tracks BPM (1 beat, 2 beats, 4 beats or 8 beats). When a loop has been set manually, the

40、 button operates as a loop shortening button (1=1/8, 2=1/4, 4=1/2, 8=1/1). CDJ-80078 1234 1234 C D F A B E 7 DisPlay 7 Jog Dial Display 515253545556575859 606162 51 TRACK number display Displays TRACK numbers. 52 Auto cue indicator (A. CUE) Lights when auto cue is on. 53 QUICK RETURN indicator Light

41、s when QUICK RETURN function is ON. 54 REMAIN indicator Indicates that track remaining time is being displayed. 55 Time display (min) (M) 56 Time display (sec) (S) 57 Frame display (F) One second is 75 frames. 58 TEMPO display Displays how much change is being applied to playback speed by the TEMPO

42、control slider. 59 Tempo control range indicator (WIDE) Lights when TEMPO 10/100 WIDE button is set to 100 WIDE. 60 Playback address display Indicates elapsed playback time and remaining playback time in an easy to grasp 1-track full scale bar graph. The 1-track full scale mode shows elapsed time by

43、 lit seg ments from the left. The 1-track full scale mode shows remaining time by unlit segments from the left . When the remaining time is 30 seconds or less, the display flashes gently and the flashing becomes faster when there is 15 seconds or less left. 61 BPM counter Indicates BPM for the curre

44、nt track. The BPM counter may sometimes not be able to measure the BPM of a track. 62 Master tempo indicator (MT) Lights when the master tempo function is on. 81 Operation display Indicates play position in frames 135 frames for one full rotation. Turns during playback and stops during pause. 82 Cue

45、 point position indicator Indicates the current cue point position. 83 Display the condition of the audio memory When set in the audio memory display mode the light will flash when recording. 84 Jog touch detection indicator In the VINYL mode, this indicator lights when the surface of the Jog dial i

46、s pressed. 85 VINYL mode display. Lights up in the VINYL mode. 8184 85 8283 ORDER NO. PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele,

47、Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2006 RRV3479 T ZZS AUG. 2006 Printed in Japan COMPACT DISC PLAYER CDJ-800MK2 Model No.Order No.Remarks CDJ-800MK2/KUCXJRRV3364 This service manual should be used together with the follow

48、ing manual(s): THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S). ModelTypePower RequirementRemarks CDJ-800MK2NKXJAC 220 V For SPECIFICATIONS and PANEL FACILITIES, refer to the operating instructions. 2 1234 1234 C D F A B E CDJ-800MK2 SAFETY INFORMATION This service manual is intended for qualified service technicians ; it is not meant for the casual do- it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained