Panasonic-SAAKX36PH-cs-sm 电路图 维修手册.pdf

《Panasonic-SAAKX36PH-cs-sm 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Panasonic-SAAKX36PH-cs-sm 电路图 维修手册.pdf（90页珍藏版）》请在收音机爱好者资料库上搜索。

1、 Panasonic Corporation 2013. All rights reserved. Unauthorized copying and distribution is a violation of law. PSG1302028CE CD Stereo System Model No.SA-AKX36PH SA-AKX36PN Product Color: (K).Black Type TABLE OF CONTENTS PAGEPAGE 1 Safety Precautions- 3 1.1. General Guidelines- 3 1.2. Before Use (For

2、 PH only)- 4 1.3. Before Repair and Adjustment- 4 1.4. Protection Circuitry- 4 1.5. Power Supply using SMPS - 5 1.6. Safety Parts Information- 6 2 Warning- 7 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices- 7 2.2. Precaution of Laser Diode- 8 2.3. Service

3、 caution based on Legal restrictions- 9 2.4. Handling Precautions for Traverse Unit-10 2.5. Grounding for electrostatic breakdown prevention- 11 3 Service Navigation - 12 3.1. Service Information- 12 3.2. Firmware Update Procedure- 13 4 Specifications- 14 5 General/Introduction- 15 5.1. Media Inform

4、ation- 15 6 Location of Controls and Components- 16 6.1. Remote Control Key Button Operation - 16 6.2. Main Unit Key Button Operation- 17 7 Installation Instructions - 18 7.1. Speaker and A/C Connection- 18 Please refer to the original service manual for: ? ? CD Mechanism Unit , Order No. PSG1102001

5、CE ? ? Speaker system SB-AKX36PN-K, Order No. PSG1302023CE RadioFans.CN 收音机爱 好者资料库 2 8 Service Mode-19 8.1. Cold-Start-19 8.2. Doctor Mode Table-20 8.3. Reliability Test Mode (CD Mechanism Unit)-23 8.4. Self-Diagnostic Mode -24 8.5. Self-Diagnostic Error Code Table -24 8.6. Sales Demonstration Lock

6、Function -25 9 Troubleshooting Guide-26 10 Disassembly and Assembly Instructions-27 10.1. Screw Types-27 10.2. Disassembly Flow Chart-28 10.3. Main Components and P.C.B. Locations-29 10.4. Disassembly of Top Cabinet-30 10.5. Disassembly of Front Panel Unit-31 10.6. Disassembly of Panel P.C.B., LED P

7、.C.B. and Mic P.C.B.-32 10.7. Disassembly of Remote Sensor P.C.B.-34 10.8. Disassembly of USB P.C.B. -35 10.9. Disassembly of CD Lid-35 10.10. Disassembly of Rear Panel-36 10.11. Disassembly of Main P.C.B.-37 10.12. Disassembly of Digital Amplifier IC (IC6000)-38 10.13. Disassembly of SMPS Module an

8、d Voltage Selector P.C.B.-39 10.14. Disassembly of CD Mechanism Unit-40 10.15. Disassembly of CD Interface P.C.B.-41 10.16. Disassembly of Fan Unit -42 11 Service Position-43 11.1. Checking of Panel P.C.B., LED P.C.B. and Mic P.C.B.-43 11.2. Checking of Main P.C.B. (Side B)-43 11.3. Checking of Main

9、 P.C.B. (Side A)-44 12 Block Diagram -45 12.1. Servo X : NG (In case that time out happens.) : Either one of FO AOC, TR AOC and FO coarse AGC is NG. : If the AGC is NG (ignore others). To cancel this mode, press 0 button on the remote control. To cancel this mode, press 0 button on the remote contro

10、l. (Display 1) (Display 2) Version (Decimal) ROM Type Year Develop after 2 sec Checksum (Hex) 23 8.3.Reliability Test Mode (CD Mechanism Unit) Below is the process flow chart of the aging test for the CD Mechanism Unit . Fig. 1. Reliability Test (Loading) Fig. 2. Reliability Test (Traverse) Fig. 3.

11、Reliability Test (Combination) OPEN Operation OPEN wait for 1 s CLOSE Operation CLOSE wait for 4 s Count up First Track Access First Track Play 5 s Last Track Access Last Track Play 5 s Count up First Track Access Access Play 10 s Open Operation Open wait for 1 s CLOSE Operation Count up First Track

12、 Last Track Last Track Play 10 s 24 8.4.Self-Diagnostic Mode 8.5.Self-Diagnostic Error Code Table Self-Diagnostic Function (Refer Section 8.4. Self-Diagnostic Mode) provides information on any problems occurring for the unit and its respective components by displaying the error codes. These error co

13、de such as U*, H* and F* are stored in memory and held unless it is cleared. The error code is automatically display after entering into self-diagnostic mode. 8.5.1.Power Supply Error Code Table FL Display Key Operation Front Key Item Description Mode Name To enter into self diagnostic checking Syst

14、em will perform a check on any unusual/error code from the memory To clear the stored in memory (EEPROM IC) Self Diagnostic Mode Error code information Delete error code Step 1: Select CD mode (Ensure no disc is inserted). Step 2: Press & hold button follow by on main unit for 2 seconds. Step 1: In

15、self diagnostic mode, Press on main unit. To exit, press /I on main unit or remote control. Step 1: In self diagnostic mode, Press 0 on remote control. To exit, press /I on main unit or remote control. Example: / Cold StartTo active cold start upon next AC power up when reset start is execute the ne

16、xt time. In self diagnostic mode: 1. Press 3 button on the remote control. 25 8.5.2.CD Mechanism Error Code Table (CD Mechanism Unit) 8.6.Sales Demonstration Lock Function 8.6.1.Entering into Sales demonstration lock mode Here is the procedures to enter into the Sales demonstration lock mode. Step 1

17、: Turn on the unit. Step 2: Select to any mode function. Step 3: Press and hold OPEN/CLOSE and CD keys for 5 sec or more. The display will show upon entering into this mode for 2 sec. Note: OPEN/CLOSE button is invalid and the main unit displays “LOCKED” while the lock function mode is entered. 8.6.

18、2.Cancellation of Sales demonstration lock mode Step 1: Turn on the unit. Step 2: Select to any mode function. Step 3: Set volume to Vol 19. Step 4: Press and hold OPEN/CLOSE and CD keys for 5 sec or more. The display will show upon entering into this mode for 2 sec. Error CodeDiagnostic ContentsDes

19、cription of errorAutomatic FL DisplayRemarks CD H15CD Open AbnormalDuring operation POS_SW_R On fail to be detected with 4 sec. Error No. shall be clear by force or during cold start. Press on main unit for next error. CD H16CD Closing AbnormalDuring operation POS_SW_CEN On fail to be detected with

20、4 sec. Error No. shall be clear by force or during cold start. Press on main unit for next error. F26Communication between CD servo LSI and micro-p abnormal. During switch to CD func- tion, if SENSE = “L” within failsafe time of 20ms. Press on main unit for next error. 26 9Troubleshooting Guide Cont

21、ents for this section is not available at time of issue 27 10 Disassembly and Assembly Instructions Illustration is based on SA-AKX36PH-K. Caution Note: This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo- nents for the unit. (You may r

22、efer to the section of “Main components and P.C.B Locations” as described in the service manual) Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed. During the disassembly and/or assembly process, please handle with care as there may be ch

23、assis components with sharp edges. Avoid touching heatsinks due to its high temperature after prolong use. (See caution as described below) During disassembly and assembly, please ensure proper service tools, equipments or jigs is being used. During replacement of component parts, please refer to th

24、e section of “Replacement Parts List” as described in the ser- vice manual. Select items from the following indexes when disassembly or replacement are required. Disassembly of Top Cabinet Disassembly of Front Panel Unit Disassembly of Panel P.C.B., LED P.C.B. and Mic P.C.B. Disassembly of Remote Se

25、nsor P.C.B. Disassembly of USB P.C.B. Disassembly of CD Lid Disassembly of Rear Panel Disassembly of Main P.C.B. Replacement of Digital Amplifier IC (IC6000) Disassembly of SMPS Module and Voltage Selector P.C.B. Disassembly of CD Mechanism Unit Disassembly of CD Interface P.C.B. Disassembly of Fan

26、Unit 10.1.Screw Types 28 10.2.Disassembly Flow Chart 10.4.Top Cabinet 10.11. Main P.C.B. 10.14.CD Mechanism Unit 10.10. Rear Panel10.16. Fan Unit 10.15.CD Interface P.C.B. 10.5. 10.6. Front panel Unit 10.7. Panel P.C.B., LED P.C.B. and Mic P.C.B. 10.8. Remote Sensor P.C.B. 10.9. USB P.C.B. CD Lid 10

27、.12.Digital Amplifier IC (IC6000) 10.13.SMPS Module and Voltage Selector P.C.B. 29 10.3.Main Components and P.C.B. Locations 30 10.4.Disassembly of Top Cabinet Step 1 Remove 2 screws on each side. Step 2 Remove 5 screws. Step 3 Slightly pull both side of Top Cabinet outwards as arrow shown. Step 4 S

28、lightly lift up both sides of Top Cabinet in an outward direction as shown. Step 5 Remove the Top Cabinet. Caution: During assembling, ensure that the Top Cabinet catches are properly inserted into Front Panel Unit. 31 10.5.Disassembly of Front Panel Unit Refer to “Disassembly of Top Cabinet”. Step

29、1 Detach 5P Cable at the connector (CN2002) on Main P.C.B. Step 2 Detach 30P FFC at the connector (CN2000) on Main P.C.B. Step 3 Release tab at the left side of Front Panel Unit. 32 Step 4 Release tabs at bottom. Step 5 Release tab at the right side of Front Panel Unit. Step 6 Remove the Front Panel

30、 Unit as arrow shown. 10.6.Disassembly of Panel P.C.B., LED P.C.B. and Mic P.C.B. Refer to “Disassembly of Top Cabinet”. Refer to “Disassembly of Front Panel Unit”. Step 1 Remove the Volume Knob. Step 2 Remove the Control Knob. 33 Step 3 Remove 7 screws. Step 4 Release catches by following the seque

31、nces (1-8). Step 5 Lift up the Panel P.C.B. and LED P.C.B. from Front Panel Unit. Caution: During assembling, ensure that LED P.C.B. is properly insert to Front Panel Unit. 34 Caution: During assembling, ensure that Panel P.C.B. is seated properly through the located & fully catched. Step 6 Remove 1

32、 screw. Step 7 Release 1 catch. Step 8 Remove the Panel P.C.B., LED P.C.B. and Mic P.C.B. Caution: During assembling, ensure that Mic P.C.B. is seated properly through the located & fully catched. 10.7.Disassembly of Remote Sensor P.C.B. Refer to “Disassembly of Top Cabinet”. Refer to “Disassembly o

33、f Front Panel Unit”. Refer to “Disassembly of Panel P.C.B., LED P.C.B. and Mic P.C.B.”. Step 1 Remove the Remote Sensor P.C.B. Caution: During assembling, ensure that Remote Sensor P.C.B. is properly inserted & fully connected to Panel P.C.B. 35 10.8.Disassembly of USB P.C.B. Refer to “Disassembly o

34、f Top Cabinet”. Refer to “Disassembly of Front Panel Unit”. Step 1 Remove 1 screw. Step 2 Release 1 catch. Step 3 Remove the USB P.C.B. Caution: During assembling, ensure that USB P.C.B. is seated properly through the located & fully catched. 10.9.Disassembly of CD Lid Refer to “Disassembly of Top C

35、abinet”. Refer to “Disassembly of Front Panel Unit”. Step 1 Remove the spring as arrow shown in order of sequence (1) to (3). Caution: During assembling, ensure that the spring is assembly at correct position. Step 2 Remove CD Lid as arrow shown. 36 10.10. Disassembly of Rear Panel Refer to “Disasse

36、mbly of Top Cabinet”. Step 1 Remove 10 screws. Step 2 Detach Voltage Selector P.C.B. from Rear Panel as arrow shown. Step 3 Release 1 catch at the Fan Unit . Step 4 Remove the Fan Unit . Step 5 Lift up Inner Chassis Unit to release the catch between the Inner Chassis Unit and the Rear Panel. Step 6

37、Release 2 tabs. Step 7 Remove Rear Panel. 37 10.11. Disassembly of Main P.C.B. Refer to “Disassembly of Top Cabinet”. Refer to “Disassembly of Rear Panel”. Step 1 Detach 5P Cable at the connector (CN2002) on Main P.C.B. Step 2 Detach 30P FFC at the connector (CN2000) on Main P.C.B. Step 3 Detach 13P

38、 Cable at the connector (CON2) on SMPS Module. Step 4 Detach 10P FFC at the connector (CN8251) on Main P.C.B. Step 5 Detach 24P FFC at the connector (FP8201) on Main P.C.B. Step 6 Detach 2P Wire at the connector (CN1001) on Main P.C.B. Step 7 Remove 2 screws. Step 8 Remove the Main P.C.B. Caution: D

39、uring assembling, ensure that Main P.C.B. is seated properly through the located & fully guided. 38 10.12. Disassembly of Digital Ampli- fier IC (IC6000) Refer to “Disassembly of Main P.C.B.”. 10.12.1. Disassembly of Digital Amplifier IC (IC6000) Caution: Handle the Main P.C.B. with caution due to i

40、ts high temperature after prolonged use. Touching it may lead to injuries. Step 1 Place the Main P.C.B. on an insulated material. Step 2 Remove 2 screws. Step 3 Lift up the Main P.C.B. as arrow shown. Caution: Keep the Heatsink Spacers in safe place. Avoid denting it, place it back during assembling

41、. Step 4 Desolder the pins of the Digital Amplifier IC (IC6000). Step 5 Remove the Digital Amplifier IC (IC6000). 10.12.2. Assembly of Digital Amplifier IC (IC6000) Step 1 Fix the Digital Amplifier IC (IC6000) onto the Main P.C.B. Step 2 Solder the pins of the Digital Amplifier IC (IC6000). Cautions

42、: Ensure that the pins of the Digital Amplifier IC (IC6000) is positioned correctly on the Main P.C.B. before soldering. 39 Step 3 Fix Heatsink spacers onto Main Heatsink. Caotion: Ensure that the Heatsink Spacers are properly located and seated flatly onto Main Heatsink. Step 4 Apply grease to the

43、Main Heatsink as indicate in the dia- gram. Caution: Ensure Grease thickness is about 0.2mm. Step 5 Upset the Main P.C.B. Step 6 Fix 2 screws. 10.13. Disassembly of SMPS Module and Voltage Selector P.C.B. Refer to “Disassembly of Top Cabinet.”. Refer to “Disassembly of Rear Panel”. Step 1 Detach 13P Cable at a connector (CON2) on the SMPS Module. Step 2 Remove 2 screws. Step 3 Remove the SMPS Module and the Voltage Selector P.C.B. Caution: During assembling, ensure that SMPS Module is seated properly through the located & fully guided. 40 10.14. Disassembly of CD Mecha- nism Unit Refer to