Panasonic-SAHT330GC-htss-sm 电路图 维修手册.pdf

《Panasonic-SAHT330GC-htss-sm 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Panasonic-SAHT330GC-htss-sm 电路图 维修手册.pdf（115页珍藏版）》请在收音机爱好者资料库上搜索。

1、n Amplifier Section RMS Output power : Dolby Digital Mode Front Ch65 W per channel (6 ), 1 kHz, 10% THD Surround Ch65 W per channel (6 ), 1 kHz, 10% THD Center Ch65 W per channel (6 ), 1 kHz, 10% THD Subwoofer Ch75 W per channel (4 ), 100 Hz, 10% THD TotalRMSDolbyDigitalmode power 400 W PMPO output

2、power3500 W DIN Output Power : Dolby Digital Mode Front Ch55 W per channel (6 ), 1 kHz, 1% THD Surround Ch55 W per channel (6 ), 1 kHz, 1% THD Center Ch55 W per channel (6 ), 1 kHz, 1% THD Subwoofer Ch65 W per channel (4 ), 100 Hz, 1% THD Total DIN Dolby Digital mode power 340 W n FM/AM Tuner, Termi

3、nals Section Preset stationFM 15 stations AM/MW 15 stations 2005 Matsushita Electric Industrial Co. Ltd. All rightsreserved.Unauthorizedcopyingand distribution is a violation of law. SA-HT330GCT SA-HT330GCP Colour (S). Silver Type Frequency Modulation (FM) Frequency range87.50 - 108.00 MHz (50-kHz s

4、tep) Sensitivity2.5 V (IHF) S/N 26 dB2.2 V Antenna terminals75 (unbalance) Amplitude Modulation (AM/MW) Frequency range522 - 1629 kHz (9 - kHz step) 520 - 1630 kHz (10 - kHz step) AM Sensitivity S/N 20 dB at 999 kHz 560 V/m Phone jack TerminalStereo, 3.5 mm jack Mic jack Sensitivity0.7mV, 1.2k Termi

5、nalMono, 6.3mm (1 system) n Disc Section Discs played ( 8 cm or 12 cm) (1) DVD-RAM (DVD-VR compatible, JPEG formatted discs) (2) DVD-Audio (3) DVD-Video (4) DVD-R, DVD-RW (DVD-Video compatible) +R, +RW (video compatible) (5) CD-Audio (CD-DA) (6) Video CD (7) SVCD (Conforming to IEC62107) DVD Home Th

6、eater Sound System Specification ORDER NO. MD0507281C3 RadioFans.CN 收音机爱 好者资料库 (8) CD-R/RW (CD-DA, Video-CD, SVCD, MP3, WMA, JPEG formatted disc) (9) MP3/WMA*1 l Compatible compression rate: MP3 : between 32 kbps and 320 kbps WMA : between 48 kbps and 320 kbps (10) JPEG*1 l Exif Ver 2.1 JPEG Baselin

7、e files l Picture resolution : between 320 x 240 and 6144 x 4096 pixels (sub sampling is 4:2:2 or 4:2:0) (11) HighMAT Level 2 (Audio and Image) *1The total combined maximum number of recognizable audio and picture contents and groups: 4000 audio and picture contents and 400 groups. Pick up Wavelengt

8、hCD 785 nm DVD 662 nm Laser powerCLASS 2 / CLASS 3A Audio output (Disc) Number of channels5.1ch (FL, FR, C, SL, SR, SW) n Video Section Video system Signal system (For GCT)PAL625/50, PAL525/60, NTSC Signal system (For GCP)NTSC Composite video output Output level1 Vp-p (75 ) TerminalPin jack (1 syste

9、m) S-video output Y output level1 Vp-p (75 ) C output level (For GCT)PAL; 0.3 Vp-p (75 ) NTSC; 0.286 Vp-p (75 ) C output level (For GCP)NTSC; 0.286 Vp-p (75 ) 1 Safety Precautions 4 1.1. GENERAL GUIDELINES 4 2 Before Repair and Adjustment 5 3 Protection Circuitry 5 4 Prevention of Electro Static Dis

10、charge (ESD) to Electrostatically Sensitive (ES) Devices 6 5 Handling the Lead-free Solder 6 5.1. About lead free solder (PbF) 6 6 Precaution of Laser Diode 7 7 Handling Precautions for Optical Pickup Unit 8 7.1. Cautions to be taken in handling the Optical Pickup Unit 8 7.2. Cautions to be taken wh

11、en replacing the Optical Pickup Unit 8 TerminalS terminal (1 system) Component video output (For GCT) NTSC: 525 (480) p/525 (480) i, PAL: 625 (576) p/625 (576) i Component video output (For GCP) (480p/480i) Y output level1 Vp-p (75 ) PBoutput level0.7 Vp-p (75 ) PRoutput level0.7 Vp-p (75 ) Terminal

12、Pin jack (Y: green, PB: blue, PR: red) (1 system) n General Power supplyAC 110 - 240 V, 50/60 Hz Power consumptionMain unit 80 W Dimensions (W x H x D)430 mm x 60 mm x 337 mm MassMain unit 3.3 kg Operating temperature range+5 C to +35 C Operating humidity range5 % to 90 % RH (no condensation) Powerc

13、onsumptioninstandby mode approx 0.5 W SB-HT335EG consists of SB-FS335EG (x4) Typically the melting point is 50 - 70F (30 - 40C) higher. Please use a high temperature soldering iron. In case of soldering iron with temperature control, please set it to 700 20F (370 10C). Pb free solder will tend to sp

14、lash when heated too high (about 1100F/600C). When soldering or unsoldering, please completely remove all of the solder on the pins or solder area, and be sure to heat the soldering points with the Pb free solder until it melts enough. 6 SA-HT330GCT / SA-HT330GCP This unit utilizes a class 1 laser.

15、Invisible laser radiation is emitted from the optical pickup lens. When the unit is turned on: 6 Precaution of Laser Diode CAUTION: 1. Do not look directly into the pick up lens. 2. Do not use optical instruments to look at the pick up lens. 3. Do not adjust the preset variable resistor on the picku

16、p lens. 4. Do not disassemble the optical pick up unit. 5. If the optical pick up is replaced, use the manufacturers specified replacement pick up only. 6. Use of control or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION

17、! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. 7 SA-HT330GCT / SA-HT330GCP 7 Handling Precautions for Optical Pickup Unit The laser diode in the optical pickup unit may break d

18、own due to static electricity of clothes or human body. Special care must be taken avoid to electrostatic breakdown when servicing and handling the laser diode. 7.1. Cautions to be taken in handling the Optical Pickup Unit The laser diode in the optical pickup unit may be damaged due to electrostati

19、c discharge generating from clothes or human body. Special care must be taken avoid to electrostatic discharge damage when servicing the laser diode. 1. Do not give a considerable shock to the optical pickup unit as it has an extremely high-precise structure. 2. To prevent the laser diode from the e

20、lectrostatic discharge damage, the flexible cable of the optical pickup unit removed should be short-circuited with a short pin or a clip. 3. The flexible cable may be cut off if an excessive force is applied to it. Use with caution when handling the flexible cable. 4. The antistatic FPC is connecte

21、d to the new optical pickup unit. After replacing the optical pickup unit and connecting the flexible cable, cut off the antistatic FPC. 7.2. Cautions to be taken when replacing the Optical Pickup Unit The flexible cable of the optical pickup unit which was supplied as a component is equipped with a

22、 short clip to prevent the laser diode from being damaged due to electrostatic discharge. Remove the short clip before connecting the flexible cable and make sure that the short land is open. (If the flexible cable is short-circuited, remove the solder.) 7.3. Grounding for electrostatic breakdown pr

23、evention Some devices such as the DVD player use the optical pickup (laser diode) and the optical pickup will be damaged by static electricity in the working environment. Proceed servicing works under the working environment where grounding works is completed. 7.3.1. Worktable grounding 1. Put a con

24、ductive material (sheet) or iron sheet on the area where the optical pickup is placed, and ground the sheet. 8 SA-HT330GCT / SA-HT330GCP 7.3.2. Human body grounding 1. Use the anti-static wrist strap to discharge the static electricity from your body. 9 SA-HT330GCT / SA-HT330GCP 8 Accessories Note :

25、 Refer to Packing Materials & Accessories Parts List (Section 27.4) for the part number. Remote Control AC cord FM indoor antenna AM loop antenna Video cable AC Plug Adaptor Speaker Label 10 SA-HT330GCT / SA-HT330GCP 9 Operation Procedures 11 SA-HT330GCT / SA-HT330GCP 10 Disc information 12 SA-HT330

26、GCT / SA-HT330GCP 13 SA-HT330GCT / SA-HT330GCP 11 About HighMAT 11.1. Whats HighMAT? Consumers worldwide are using PCs to create their own collections of music, photos and even video by burning them onto CDs. But how these collections can be experienced across different devices can be confusing to n

27、avigate, time consuming to access for a DVD player, and be incomplete in terms of music information available to the customer. HighMAT offers a solution to this growing consumer problem. HighMAT dramatically improves the digital media experience on consumer electronic devices by delivering a simple,

28、 standardized approach that allows consumers who have created personal collections of digital music, photography and video on their PC to: Create a HighMAT CD or DVD which can be easily played back on consumer electronics devices such as CD and DVD players, and car stereos. Move digital media files

29、(using recordable media such as CD-R and CD-RW) between the PC and various playback devices such as CD and DVD players. A new standard for creating personal media on consumer electronic devices, HighMAT enable easier and more seamless interoperability between Windows PCs and devices designed for you

30、r living room, or the car. 11.2. Why take advantage of HighMAT? A Problem Defined:Today, when consumers create their own digital audio, video or photo collections on CD-R or other physical formats, there are numerous, inconsistent ways that devices read the data. For the consumer, the playback exper

31、ience can be confusing: 14 SA-HT330GCT / SA-HT330GCP A Solution Created: HighMAT delivers a better digital media access experience by creating a standard approach for PCs to structure digital media on various physical formats and for playback devices to read the data. 11.3. Benefits of HighMAT? Conv

32、entionalHighMAT Even though DVD player is CD-R/RW compatible, the inconsistent ways that various DVD players can read the music or photos files often leads to a confusing and inconsistent playback experince. HighMATcompatibleproductsplaycontentbackwithconsistent interface. This includes products whi

33、ch are JPEG compatible products without HighMAT support. 15 SA-HT330GCT / SA-HT330GCP 16 SA-HT330GCT / SA-HT330GCP HighMAT is now available for CD Burning and in Leading DVD Players. HighMAT is a new technology that is now available in leading software and consumer electronic devices to dramatically

34、 improve the digital media experience when you create homemade CDs. HighMAT delivers a simple, standardized way for PC software and consumer electronics devices to talk to each other and work better together. When you create your homemade CDs with software that supports HighMAT CD burning, and then

35、play them back on a DVD player that supports HighMAT, you get better, easier navigation. You get folders you can access with a single click of your DVD players remote control. You can view important information about your music like full song names, artist titles, album names and genre. And you can

36、get faster startup on your home entertainment device. To enjoy the benefits of HighMAT, all you need is software that supports HighMAT for CD burning of music or photos, as well as a home entertainment device like a DVD player that supports HighMAT for playback. Always look for the HighMAT logo on y

37、our software or home entertainment device to ensure it supports the HighMAT experience. 17 SA-HT330GCT / SA-HT330GCP 12 Assembling and Disassembling “ATTENTION SERVICER” Some chassis components may be have sharp edges. Be careful when disassembling and servicing. 1. This section describes procedures

38、 for checking the operation of the major printed circuit boards and replacing the main components. 2. For reassembly after operation checks or replacement, reverse the respective procedures. Special reassembly procedures are described only when required. 3. Select items from the following index when

39、 checks or replacement are required. Disassembly of Top Cabinet Disassembly of SMPS Module P.C.B. Disassembly of Rear Panel Disassembly of AC Inlet P.C.B. Disassembly of Digital Amplifier P.C.B. Disassembly of DVD Lid (when taking out disc manually) Disassembly of Front Panel Disassembly of Headphon

40、e, Panel and Tact Switch P.C.B. Disassembly of DVD Mechanism unit Disassembly of Main P.C.B. Warning: This product uses a laser diode. Refer to “Precaution of Laser Diode”. 12.1. Disassembly flow chart The following chart is the procedure for disassembling the casing and inside parts for internal in

41、spection when carrying out the servicing. To assemble the unit, reverse the steps shown in the chart below. 18 SA-HT330GCT / SA-HT330GCP 12.2. P.C.B. Locations 19 SA-HT330GCT / SA-HT330GCP 12.3. Disassembly of Top Cabinet Step 1 : Remove 4 screws. Step 2 : Remove 3 screws. Step 3 : Remove Top Cabine

42、t as arrows shown. 12.4. Disassembly of SMPS Module P.C.B. Follow the (Step 1) - (Step 3) of item 12.3. Step 1 : Remove 4 screws. Step 2 : Detach connector (CN1, CN2, CN3), and remove SMPS Module P.C.B. Note : SMPS Module should be replaced as an assembly unit in case it is faulty. 12.5. Disassembly

43、 of Rear Panel Follow the (Step 1) - (Step 3) of item 12.3. 20 SA-HT330GCT / SA-HT330GCP Step 1 : Remove 9 screws. Step 2 : Remove the rear panel as arrows shown. Note : Be careful of catches on the sides when remove the rear panel. Step 3 : Detach Fan connector CN2003 to remove rear panel. 12.6. Di

44、sassembly of AC Inlet P.C.B. Follow the (Step 1) - (Step 3) of item 12.3. Follow the (Step 1) - (Step 3) of item 12.5. Step 1 : Detach connector CN1. Step 2 : Remove AC inlet P.C.B. as arrow shown. 12.7. Disassembly of Digital Amplifier P.C.B. Follow the (Step 1) - (Step 3) of item 12.3. Follow the

45、(Step 1) - (Step 3) of item 12.5. Step 1 : Remove 2 screws. Step 2: Detach connector (CN2, CN2001) and FFC (CN2002). Step 3: Flip over the Digital Amplifier P.C.B. (Side A). 21 SA-HT330GCT / SA-HT330GCP 12.8. Disassembly of DVD Lid (when taking out disc manually) Follow the (Step 1) - (Step 3) of it

46、em 12.3. Step 1 : Separates the gear for drawing out tray from the mechanism unit. Insert a screw driver in the gear (The gear jig). Step 2 : Insert the gear jig into the tray open/ close hole. Step 3 : Turn the gear jig counterclockwise to open the tray. Note : Do not use force to push the tray bac

47、kwards as it can damage the mechanism unit. Turn the gear jig clockwise to return tray. 12.9. Disassembly of Front Panel Follow the (Step 1) - (Step 3) of item 12.3. Follow the (Step 1) - (Step 3) of item 12.8. 22 SA-HT330GCT / SA-HT330GCP Step 1 : Remove the DVD Lid from the tray section. Step 2 :

48、Detach connector (CN2005) and FFC (CN2006). Step 3 : Remove 2 screws. Step 4 : Remove Mic Knob. Step 5: Release all the claws and remove the front panel as arrows shown. 12.10. Disassembly of Headphone, Panel and Tact Switch P.C.B. Follow the (Step 1) - (Step 3) of item 12.3. Follow the (Step 1) - (

49、Step 3) of item 12.8. Follow the (Step 1) - (Step 5) of item 12.9. Step 1 : Remove Volume Knob. Step 2 : Remove 2 screws and panel angle. Step 3 : Remove 2 screws and Mecha Support. Step 4 : Remove 5 screws and remove Headphone, Panel and 23 SA-HT330GCT / SA-HT330GCP Tact Switch P.C.B. 12.11. Disassembly of DVD Mechanism unit Follow the (Step 1) - (Step 3) of item 12.3. Follow the (Step 1) - (Step 3) of item 12.8. Step 1 : Remove D