NAD-T753-avr-tbh200402c 电路图 维修手册.pdf

《NAD-T753-avr-tbh200402c 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《NAD-T753-avr-tbh200402c 电路图 维修手册.pdf（5页珍藏版）》请在收音机爱好者资料库上搜索。

1、Page 1 of 5 Technical Bulletin T753 Product: A/V Receiver Hardware Technical Bulletin: T753-H2004-02 Date: June 15, 2004 Subject: Residual Noise Note:Implemented in production from Serial number: R44T75307575 Previous T.B.s required: ? ? YES T753H2004-01 ? ? NO DESCRIPTION: At high volume setting wi

2、th no signal on an un-terminated analogue input, there maybe some residual noise coming from one or more channels. REASON: This residual noise is coming from the DSP PC board and power supply ground. SOLUTION: Perform the following ground changes to lower residual noise. 1. Add jumper wire between D

3、SP AGND (grounding bracket) and Multi-channel RCA (the blue wire in the photo, use AWG #18). See Figure 1. Figure 1 RadioFans.CN 收音机爱 好者资料库 Page 2 of 5 Technical Bulletin T753 Product: A/V Receiver Hardware Technical Bulletin: T753-H2004-02 2. Add a jumper wire between the multi-channel RCA connecto

4、r and the Pre Amp connector, must be 18 gauge wire. See figure 2. Figure 2 Contact: NAD Electronics International 633 Granite Court Pickering, ON Canada L1K 3K1 Voice: 905-831-0799 FAX 905-837-6357 RadioFans.CN 收音机爱 好者资料库 Page 3 of 5 Technical Bulletin T753 Product: A/V Receiver Hardware Technical B

5、ulletin: T753-H2004-02 3. For J705B on AUDIO PCB, cut all the AGND pin. That is pin 1, 3, 9 & 12. Please refer to figure 3. Figure 3 Contact: NAD Electronics International 633 Granite Court Pickering, ON Canada L1K 3K1 Voice: 905-831-0799 FAX 905-837-6357 RadioFans.CN 收音机爱 好者资料库 Page 4 of 5 Technica

6、l Bulletin T753 Product: A/V Receiver Hardware Technical Bulletin: T753-H2004-02 4. Float the DSP AGND (including the grounding bracket) from chassis. See figure 4 and 5. FIGURE 4 Contact: NAD Electronics International 633 Granite Court Pickering, ON Canada L1K 3K1 Voice: 905-831-0799 FAX 905-837-63

7、57 Page 5 of 5 Technical Bulletin T753 Product: A/V Receiver Hardware Technical Bulletin: T753-H2004-02 5. Mount the front panel ground cable to the nearest front panel screw. See figure 5. Figure 5 Contact: NAD Electronics International 633 Granite Court Pickering, ON Canada L1K 3K1 Voice: 905-831-0799 FAX 905-837-6357