Marantz-AV8003-pre-mz08064 电路图 维修手册.pdf

《Marantz-AV8003-pre-mz08064 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Marantz-AV8003-pre-mz08064 电路图 维修手册.pdf（9页珍藏版）》请在收音机爱好者资料库上搜索。

1、 100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ08-064 Date: October 6, 2008 _ Model: AV8003 Subject: Service spare part addition information. Symptom: The part number of Extension FFC will be added to the Service parts. PWB can be removed from a unit and now checked. Solution: The Ex

2、tension FFC comes in several types depending on the number of PINs and the length. That is why each comes marked in the same color with the location specified on the wiring diagram. Please check the attached wiring diagram on the following pages before use. Parts: _ CONFIDENTIALITY NOTICE: The infor

3、mation contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement.

4、 Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 _ CONF

5、IDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of t

6、he MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. R

7、adioFans.CN 收音机爱 好者资料库 Extension cable part number: 943606004580M AV8003 EXTENSION FFC KIT Prepare a suitable insulator board to rest any removed pcbs on during troubleshooting. Place the Component PWB on the insulator board. _ CONFIDENTIALITY NOTICE: The information contained in this document is in

8、tended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemin

9、ation or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 If you want to check the HD Radio PWB. Put on

10、 the HD Radio PWB onto insulator board. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from d

11、isclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of

12、 the information contained in this document. If you want to check the DSP PWB, Video PWB or HDMI PWB. Change FFC : 17P 1.0mm(AV8003 A : Blue) : CN71(DSP) CN72(VIDEO) Change FFC : 13P 1.0mm(AV8003 B : Red) : CN83(DSP) CN84(HDMI) Change FFC : 15P 1.0mm(AV8003 C : Green) : CN81(DSP) CN82(HDMI) Put the

13、Video PWB, HDMI PWB and Component PWB onto the insulator board. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and

14、 may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resu

15、lting from the misuse of the information contained in this document. If you want to check the Input PWB. Take out the Input PWB. Install the DSP PWB. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their

16、 employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibi

17、ted. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. Put the Input PWB onto the insulator board and install the other PWB. Change FFC: 17P 1.0mm (AV8003 A: Blue): CN71 (DSP) CN72 (VIDEO) Change FFC:

18、 13P 1.0mm (AV8003 B: Red): CN83 (DSP) CN84 (HDMI) Change FFC: 15P 1.0mm (AV8003 C: Green): CN81 (DSP) CN82 (HDMI) Put the Input PWB, Video PWB, HDMI PWB and Component PWB onto the insulator. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MA

19、RANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document

20、and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. If you want to check the Preout PWB or Standby PWB. Put the Preout PWB on the insulator board. _ CONFID

21、ENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the

22、 MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. If

23、you want to check the Front PWB. Change FFC : 17P 1.0mm(AV8003 A : Blue) : CN63(DSP) CN64(FRONT) Disconnect the CN89 (Headphone PWB) and CN17(DSP). You will place the set into the headphone mode when you disconnect the CN89 (Headphone PWB). Disconnecting CN17 (DSP) does not flash the HDMI and Pure D

24、irect indicator. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applica

25、ble laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document.