《Primare-A30_2-psu-mod 电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《Primare-A30_2-psu-mod 电路图 维修手册.pdf(4页珍藏版)》请在收音机爱好者资料库上搜索。
1、PSU Modification A30.2 070212 Written by Bjorn Holmqvist for the manufacturing industry. Confidential ! This document is not allowed to show for third part without written permission from Primare Systems AB. If you got this document by accident, please delete immediately. This Document is Primare Sy
2、stems Property. RadioFans.CN 收音机爱 好者资料库 This modification solves a stability problem with the power regulation for the amplifiers driverstage. The first symptom for instability are Speaker relay flickering during startup, other symptoms might be distortion in the sound when amplifier is warm. If the
3、re is oscillation in (REG1, REG101, REG2, REG102) it can easily be spotted by monitoring the output voltage at test points (+-48V) with the oscilloscope. When servicing this circuit I also recommend that the resistance over R63, R163, R64, R164 are checked, if the resistance are different that the s
4、tated 4.7R please replace all four of them. 1. Remove mains power and the topcover. 2. Remove the heatsinks on REG1, REG101, REG2, REG102 in order to free up space for the soldering iron. 3. Solder 22uF/63V 105 centigrades capacitor in parallel with C18, C118, C19, C119 (or replace the original 3.3u
5、F capacitor). Use a small soldering tip when carrying out this work and watch the relays ! 4. Put back the heatsinks on REG1, REG101, REG2, REG102. 5. Test the amplifier and measure the voltage at +-48V test points on both channels. RadioFans.CN 收音机爱 好者资料库 Pics Note! I have used 10uF capacitors in these pictures, the correct value is 22uF. Left CH Right CH 22uF /63V 22uF /63V RadioFans.CN 收音机爱 好者资料库 Overview /Bjorn Holmqvist