Aiwa-SX-AV1700-AVR2700-C1700-R1700-Service-Manual-2 电路图 维修手册.pdf

《Aiwa-SX-AV1700-AVR2700-C1700-R1700-Service-Manual-2 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Aiwa-SX-AV1700-AVR2700-C1700-R1700-Service-Manual-2 电路图 维修手册.pdf（4页珍藏版）》请在收音机爱好者资料库上搜索。

1、SPEAKER SYSTEM SX-AVR1700 SX-AV1700 SX-C1700 SX-R1700 S/M Code No. 09-993-328-1N2 Y Y Y Y SERVICE MANUAL DATA SX-AV1700 SX-R1700 SX-C1700 aiwa aiwa aiwa aiwa aiwa RadioFans.CN 收音机爱 好者资料库 2 SPECIFICATIONS SX-AV1700 Speaker2 way 3 speakers Woofer: 100 mm, cone type Tweeter: 60 mm, cone type Passive ra

2、diator: 100 mm Impedance8 ohms Maximum input power75 W (peak) Dimensions (W x H x D) 170 x 500 x 205 mm (63/4 x 193/4 x 81/8 in.) Weight2.8 kg (6 lbs 3 oz) Design and specifications are subject to change without notice. SX-C1700 SpeakerFull-range: 100 mm x 2, cone type Impedance8 ohms Maximum input

3、power75 W (peak) Dimensions (W x H x D) 430 x 120 x 175 mm (17 x 43/4 x 7 in.) Weight2.7 kg (5 lbs 15 oz) Design and specifications are subject to change without notice. SX-R1700 SpeakerFull-range: 100 mm x 1, cone type Impedance8 ohms Maximum input power75 W (peak) Dimensions (W x H x D) 120 x 230

4、x 175 mm (43/4 x 91/8 x 7 in.) Weight1.9 kg (4 lbs 3 oz) Design and specifications are subject to change without notice. REF. NOPART NO.KANRIDESCRIPTION NO. 1 8Z-AS3-906-010 IB,Y(9L)C ACCESSORIES LIST RadioFans.CN 收音机爱 好者资料库 3 SPEAKER DISASSEMBLY INSTRUCTIONS Insert a flat-bladed screwdriver into th

5、e position indicated by the arrows and remove the panel. Remove the screws of each speaker unit andthen remove the speaker units. Remove the grill frame and four pieces of rubber caps by pulling out with a flat-bladed screwdriver. Remove the screws from hold where installed rubber caps. Insert a fla

6、t-bladed screwdriver into the position indicated by the arrows and remove the panel. Re- move the screws of each speaker unit and then remove the speaker units. Insert a flat-bladed screwdriver into the position indicated by the arrows and remove the panel. Turn the speaker unit to counter- clockwis

7、e direction while inserting a flat-bladed screwdriver into one of the hollows arround speaker unit, and then remove the speaker unit. After replacing the speaker unit, install it turnning to clock- wise direction unitil click sound comes out. Type.1 Type.3 Type.2 TOOLS 1Plastic head hammer 2(-) flat

8、 head screwdriver 3Cut chisel How to Remove the PANEL, FR 1.Insert the (-) flat head screwdriver tip into the gap between the PANEL, FR and the PANEL, SPKR. Tap the head of the (-) flat head screwdriver with the plastic hammer head, and create the clearance as shown in Fig-1. 2.Insert the cut chisel

9、 in the clearance, and tap the head of the cut chisel with plastic hammer as shown in Fig-2, to remove the PANEL, FR. 3.Place the speaker horizontally. Tap head of the cut chisel with plastic hammer as shown in Fig-3, and remove the PANEL, FR completely. Type.4 Fig-1Fig-2 Fig-3 How to Attach the PAN

10、EL, FR Attach the PANEL, FR to the PANEL, SPKR. Tap the four corners of the PANEL, FR with the plastic hammer to fit the PANEL, FR into the PANEL, SPKR completely. 1? 2?3 RadioFans.CN 收音机爱 好者资料库 920074 Printed in Singapore 211, IKENOHATA 1CHOME, TAITO-KU, TOKYO 110-8710, JAPAN TEL:03 (3827) 3111 SPE

11、AKER PARTS LIST REF. NOPART NO.KANRIDESCRIPTION NO. 1 8Z-AS3-001-010 GRILLE,FRAME ASSY 2 8Z-AS3-602-010 SPKR, 100 3 8Z-AS3-604-010 SPKR, 100 4 8Z-AS3-606-010 SPKR, TW 50 5 8Z-AS3-005-010 TERMINAL,ASSY 6 88-AS1-609-010 SPKR, CORD 30M SX-AV1700 REF. NOPART NO.KANRIDESCRIPTION NO. 1 8Z-AS4-001-010 GRILLE,FRAME ASSY 2 8Z-AS4-602-010 SPKR, 100 3 8Z-AS4-003-010 TERMINAL,ASSY SX-C1700 REF. NOPART NO.KANRIDESCRIPTION NO. 1 8Z-AS5-601-010 SPKR, 100 2 8Z-AS5-001-010 GRILLE,FRAME ASSY 3 8Z-AS5-005-010 TERMINAL,ASSY SX-R1700