Alpine-DVE-5207-Service-Manual 电路图 维修手册.pdf

《Alpine-DVE-5207-Service-Manual 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Alpine-DVE-5207-Service-Manual 电路图 维修手册.pdf（44页珍藏版）》请在收音机爱好者资料库上搜索。

1、SERVICE MANUAL DVD-VIDEO Player 3 / 05-A 68E38377S01 DVE-5207 DIGITAL VIDEO TM The following cautions will prevent accidents in the workplace and will ensure safe products. *The symbols indicate caution is needed to prevent injuries and damage to property. The symbols and their meanings follow. *The

2、 following symbols indicate two levels of cautions. When you see this symbol, you have to be very careful. When you see this symbol, you have to follow the instructions there. Do not look squarely into the laser light Fuse Caution coming from the pickup.Always use a designated fuse. You may loose yo

3、u sight.Use of an incorrect fuse may result in a fire. Do not allow wiring to be caught in the Battery Caution screw/chassis.Use the designated battery. If wiring is caught in the screw/chassis, it mayConfirm the correct polarity and seat of the battery. cause a short circuit, resulting in a fire.An

4、 incorrect battery or an improperly connected or seated battery may result in a fire. High Temperature CautionDesignated Parts Caution Touching the heat sink may cause severe burns.Look up the part list and ensure that only designated parts are used to prevent problems or accidents. Reverse Power Su

5、pply Connections orWiring Caution Misconnections CautionEnsure that the wiring is correct when rewiring to Reverse power supply connections orprevent problems with ignition/breakdown. misconnections may cause ignition problems and smoke may result. Soldering CautionWear Gloves Hot solder from solder

6、 splash may cause severe Wear gloves to prevent electrical shocks or injury burns.from the end face of the metal. For the FDA laser standard, the following CAUTION label is stuck on each product Please be careful for repair. If you ignore this symbol and handle the product incorrectly or unsafely, i

7、njury or only material damage may result. If you ignore this symbol and handle the product incorrectly or unsafely, serious injury or death may result. Warning Caution Warning Caution CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM - 2 - $1,%1,&1,#2 $1 $1 101 103 -1 102 103 -2103 -3 106 -1

8、106 -2106 -3 107 -1107 -2107 -3107 -4107 -5107 -6107 -7 103 -4103 -5103 -6 104 105 X1 X4X1X1 X1 X1 X1 X1 X1 X1 X1 $1,%1,&1,#2 109 %1,&1,#2 $1,%1,&1,#2 108 108 105 104 106 107 $1 $1$1,%1,&1,#2 $1,%1,&1,#2 %1,&1,#2 $1 103 $1,%1,&1,#2 102101 109 %1,&1,#2 Top Side NOTE:$1 For European Model Only, %1 For

9、 General Foreign/REGION-3 Model Only, &1:For General Foreign/REGION-4 Model Only, #2:For Chinese Model Only, Others:Common. X4X4 X4 X4 X4X4 X2 X2 X1 X1 Packing Assembly Parts List Part No.Part No. 10101T25634Y02ASSY,WIRE VIDEO 2000#2 103-660S70585F01BAT,LIT.3V (CR2025) 10201T15832W11 ASSY,RCA CABLE

10、2.0-2$1 10415D00529K02CASE,INNER $1 103-103S60820Y16SCR,MCH 5X8 ZN A %1 10415D00529K02CASE,INNER %1 103-103S60820Y16SCR,MCH 5X8 ZN A &1 10415D00529K02CASE,INNER &1 103-103S60820Y16SCR,MCH 5X8 ZN A #2 10415D00529K02CASE,INNER #2 103-103S60820Y16SCR,MCH 5X8 ZN A $1 10501T75472Y01 ASSY,REMO RUE-4201 $1

11、 103-246A70667Y01STUD,BOLT %1 10501T75472Y01 ASSY,REMO RUE-4201 %1 103-246A70667Y01STUD,BOLT &1 10501T75472Y01 ASSY,REMO RUE-4201 &1 103-246A70667Y01STUD,BOLT #2 10501T75472Y01 ASSY,REMO RUE-4201 #2 103-246A70667Y01STUD,BOLT $1 106-107A50414W03 BKT MTG.BASE $1 103-336A11113W01 CAP,RUBBER(A) $1 106-2

12、07B81278W01 BKT,SIDE (L) %1 103-336A11113W01 CAP,RUBBER(A) $1 106-307B81278W02 BKT,SIDE (R) &1 103-336A11113W01 CAP,RUBBER(A) $1 107-103D40121T67SCR,MCH(W/W)M5X10 A #2 103-336A11113W01 CAP,RUBBER(A) $1 107-202-02981Z01 NUT,CUS 6X6 ZB A $1 103-402B70670Y01NUT,CUS 5X5.5 ZN A $1 107-303B90962F03BOLT,HE

13、X M6X50 A %1 103-402B70670Y01NUT,CUS 5X5.5 ZN A $1 107-402-02949Z01 NUT,CUS 6X9.5 ZB A &1 103-402B70670Y01NUT,CUS 5X5.5 ZN A $1 107-504-02958Z01 WAS,SPR6.1X12.2X1.5A #2 103-402B70670Y01NUT,CUS 5X5.5 ZN A $1 107-603S70694Y03SCR,TPG 5X15 ZB A $1 103-503A60836Y01SCR,CUS 5X7 ZN A $1 107-775T58346F01PAD,

14、MAGIC TAPE %1 103-503A60836Y01SCR,CUS 5X7 ZN A $1 10868-02278Z32O/M AOEU AODL &1 103-503A60836Y01SCR,CUS 5X7 ZN A %1 10868-02278Z33O/M AAO AODL #2 103-503A60836Y01SCR,CUS 5X7 ZN A &1 10868-02278Z33O/M AAO AODL $1 103-660S70585F01BAT,LIT.3V (CR2025) #2 10868-02770Z09O/M,AOCH 5207 %1 103-660S70585F01B

15、AT,LIT.3V (CR2025) %1 10901T15694Y05ASSY,REMOCON EYE &1 103-660S70585F01BAT,LIT.3V (CR2025) &1 10901T15694Y05ASSY,REMOCON EYE #2 10901T15694Y05ASSY,REMOCON EYE NOTE:$1:For European Model Only, %1:For General Foreign/REGION-3 Model Only,&1:For General Foreign/REGION-4 Model Only, #2:For Chinese Model

16、 Only, Others:Common. Packing Method View Description No.No. SymbolSymbolDescription DVE-5207 - 4 - Connect properly. Never connect to parts other than the ones indicated in these operating instructions. Also refer to the operating instructions of the other products in the system. A remote control e

17、ye is needed when a monitor made by another company is connected. White/BrownREMOTE IN GNDBlack BATTERY Fuse (7.5A) Yellow IGNITIONRed Cable ColorCable Specifications Yellow White (L) Red (R) White/ Brown Black Yellow Red Video Output Connector This connector is used in combination with the video in

18、puts of another video product (AV head unit or TV monitor). Audio Output Connectors These connectors are used in combination with a head unit or TV monitor with audio input connectors, if the digital output terminal is not connected. Remote Control Input Lead This lead is used in combination with an

19、 ALPINE monitor with a remote control output lead. Ground Lead Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. Battery Lead Connect this lead to the positive (+) post of the vehic

20、les battery. Switched Power Lead (Ignition) Connect this lead to an open terminal on the vehicles fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position. Digital Output Terminal (Optical) This terminal is used to connect DVE-52

21、07 to ALPINE digital audio processor (PXA-H701 etc.). These products include a fiber optic cable that will plug directly into the digital output terminal of the DVE-5207. Remote Control Eye Jack Connect the remote control eye to this jack. Not used when using a monitor with a built-in remote control

22、 sensor unit. A remote control eye is needed when a monitor made by other company is connected. To remote control output lead Connect to a metal part of chassis body with a screw Remote Control Eye Ignition Key System Connections DVE-5207 (North American Model Only) - 5 - System Example Connecting a

23、n Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H701, PXA-H900, etc.) and ALPINE TV Monitor EQ/DIV Also refer to the operating instructions of the other products in the system. ALPINE TV Monitor (Sold Separately) Digital Audio Processor PXA-H701 etc (Sold Separately) AUX Video Input Term

24、inal (AUX1) Remote Control Input Lead (White/Brown) Remote Control Output Lead (AUX1) (White/Brown) Video Output Connector RCA Extension Cable (Included) Audio Output Connector RCA Extension Cable (Included) DVD Player DVE-5207 Digital Output Terminal (Optical) Fiber Optic Cable (Sold separately 491

25、5/4916) Digital Input Terminal (Optical) (for DVD Player) Ai-NET Input Connector System Switch When connecting a digital audio processor using Ai-NET feature, place this switch in the EQ/DIV position. Head Unit with Ai-NET (Sold Separately) Ai-NET Input Connector ALPINE TV Tuner (Sold Separately) *

26、Only when Digital Audio Processor is not connected In this case, the system switch of the head unit is set to “NORM.” Ai-RCA Conversion Cable (Sold separately) DVE-5207 - 6 - Connecting Another Manufacturers TV Monitor Remote control eye is required. Also refer to the operating instructions of the o

27、ther products in the system. When you connecting another manufacturers TV monitor, the remote control input lead (White/Brown), is not used. TV Monitor (Sold Separately) TV Tuner (Sold Separately) AUX Video Input Terminal (AUX1) Video Output Connector Remote Control Input Lead (White/Brown) RCA Exte

28、nsion Cable (Included) Audio Output Connector RCA Extension Cable (Included) AUX Audio Input Terminal (AUX1) DVD Player DVE-5207 Remote Control Eye (Included) Not Used Remote Control Eye Jack DVE-5207 - 7 - Connect properly. Never connect to parts other than the ones indicated in these operating ins

29、tructions. Also refer to the operating instructions of the other products in the system. A remote control eye is needed when a monitor made by another company is connected. White/BrownREMOTE IN GNDBlack BATTERY Fuse (7.5A) Yellow IGNITION Red Cable ColourCable Specifications Yellow White (L) Red (R)

30、 White/ Brown Black Yellow Red Video Output Connector This connector is used in combination with the video inputs of another video product (AV head unit or TV monitor). Audio Output Connectors These connectors are used in combination with a head unit or TV monitor with audio input connectors, if the

31、 digital output terminal is not connected. Remote Control Input Lead This lead is used in combination with an ALPINE monitor with a remote control output lead. Ground Lead Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fasten

32、ed using the sheet metal screw provided. Battery Lead Connect this lead to the positive (+) post of the vehicles battery. Switched Power Lead (Ignition) Connect this lead to an open terminal on the vehicles fuse box or another unused power source which provides (+) 12V only when the ignition is turn

33、ed on or in the accessory position. Digital Output Terminal (Optical) This terminal is used to connect DVE-5207 to ALPINE digital audio processor (PXA-H701 etc.). These products include a fiber optic cable that will plug directly into the digital output terminal of the DVE-5207. Remote Control Eye J

34、ack Connect the remote control eye to this jack. Not used when using a monitor with a built-in remote control sensor unit. A remote control eye is needed when a monitor made by other company is connected. To remote control output lead Connect to a metal part of chassis body with a screw Remote Contr

35、ol Eye (Sold Separately) Ignition Key DVE-5207 (European Model Only) - 8 - Connecting an Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H701, PXA-H900, etc.) and ALPINE TV Monitor EQ/DIV Also refer to the operating instructions of the other products in the system. ALPINE TV Monitor (Sold

36、Separately) Digital Audio Processor PXA-H701 etc (Sold Separately) AUX Video Input Terminal (AUX1) Remote Control Input Lead (White/Brown) Remote Control Output Lead (AUX1) (White/Brown) Video Output Connector RCA Extension Cable (Included) Audio Output Connector *Only when Digital Audio Processor i

37、s not connected In this case, the system switch of the head unit is set to “NORM.” RCA Extension Cable (Included) DVD Player DVE-5207 Digital Output Terminal (Optical) Fiber Optic Cable (Sold separately 4915/4916) Digital Input Terminal (Optical) (for DVD Player) Ai-NET Input Connector System Switch

38、 When connecting a digital audio processor using Ai-NET feature, place this switch in the EQ/DIV position. Head Unit with Ai-NET (Sold Separately) Ai-NET Input Connector ALPINE TV Tuner (Sold Separately) System Example Ai-RCA Conversion Cable (Sold Separately) DVE-5207 - 9 - Connecting Another Manuf

39、acturers TV Monitor Remote control eye is required. Also refer to the operating instructions of the other products in the system. When you connecting another manufacturers TV monitor, the remote control input lead (White/Brown), is not used. TV Monitor (Sold Separately) TV Tuner (Sold Separately) AU

40、X Video Input Terminal (AUX1) Video Output Connector Remote Control Input Lead (White/Brown) RCA Extension Cable (Included) Audio Output Connector RCA Extension Cable (Included) AUX Audio Input Terminal (AUX1) DVD Player DVE-5207 Remote Control Eye (Sold Separately) Not Used Remote Control Eye Jack

41、DVE-5207 - 10 - Connect properly. Never connect to parts other than the ones indicated in these operating instructions. Also refer to the operating instructions of the other products in the system. A remote control eye is needed when a monitor made by another company is connected. White/BrownREMOTE

42、IN GNDBlack BATTERY Fuse (7.5A) Yellow IGNITION Red Cable ColorCable Specifications Yellow White (L) Red (R) White/ Brown Black Yellow Red Video Output Connector This connector is used in combination with the video inputs of another video product (AV head unit or TV monitor). Audio Output Connectors

43、 These connectors are used in combination with a head unit or TV monitor with audio input connectors, if the digital output terminal is not connected. Remote Control Input Lead This lead is used in combination with an ALPINE monitor with a remote control output lead. Ground Lead Connect this lead to

44、 a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. Battery Lead Connect this lead to the positive (+) post of the vehicles battery. Switched Power Lead (Ignition) Connect this lead to an open terminal o

45、n the vehicles fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position. Digital Output Terminal (Optical) This terminal is used to connect DVE-5207 to ALPINE digital audio processor (PXA-H701 etc.). These products include a fibe

46、r optic cable that will plug directly into the digital output terminal of the DVE-5207. Remote Control Eye Jack Connect the remote control eye to this jack. Not used when using a monitor with a built-in remote control sensor unit. A remote control eye is needed when a monitor made by other company i

47、s connected. To remote control output lead Connect to a metal part of chassis body with a screw Remote Control Eye Ignition Key DVE-5207 (General Foreign Model Only) - 11 - EQ/DIV Also refer to the operating instructions of the other products in the system. ALPINE TV Monitor (Sold Separately) Digita

48、l Audio Processor PXA-H701 etc (Sold Separately) AUX Video Input Terminal (AUX1) Remote Control Input Lead (White/Brown) Remote Control Output Lead (AUX1) (White/Brown) Video Output Connector RCA Extension Cable (Included) Audio Output Connector * Only when Digital Audio Processor is not connected I

49、n this case, the system switch of the head unit is set to “NORM.” RCA Extension Cable (Included) DVD Player DVE-5207 Digital Output Terminal (Optical) Fiber Optic Cable (Sold Separately 4915/4916) Digital Input Terminal (Optical) (for DVD Player) Ai-NET Input Connector System Switch When connecting a digital audio processor using Ai-NET feature, place this switch in the EQ/DIV position. Head Unit with Ai-NET (Sold Separately) Ai-NET Input Connector ALPINE TV Tuner (Sold Separately) System Example Connecting an Ai-NET compatible Head Uni