Bogen-CA17-Operation-Manual 电路图 维修手册.pdf

《Bogen-CA17-Operation-Manual 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Bogen-CA17-Operation-Manual 电路图 维修手册.pdf（1页珍藏版）》请在收音机爱好者资料库上搜索。

1、The Bogen Model CA17 Call Switch is a momentary-push switch designed for use with PI/SI35A Intercom Systems in conjunction with the SCR25A. When pushed and released once, a signal is sent to the MCP35A via the SCR25A call-in module to annunciate the call-in on the SBA225.The room must be equipped wi

2、th a 25-volt speaker. The CA17 is designed for flush-mounting in a standard single-gang outlet box; connections are made as illustrated in the figure below. EMERGENCY CALL SWITCHModel CA17 Model CA17 Connecting Diagram 50 Spring Street, Ramsey, NJ 07446 U.S.A. 201-934-8500; FAX: 201-934-9832 Printed

3、 in U.S.A. 0301 2003 Bogen Communications, Inc. 54-5919-01R3 Specifications subject to change without notice. From MCP35A +12V Terminal. Connect only the +12V Terminal to this point. Do not connect a ground lead to this point. Use second pin to jump +12V DC to additional SCR25A panels. The Bogen Mod

4、el CA17 Call Switch is a momentary-push switch designed for use with PI/SI35A Intercom Systems in conjunction with the SCR25A. When pushed and released once, a signal is sent to the MCP35A via the SCR25A call-in module to annunciate the call-in on the SBA225.The room must be equipped with a 25-volt

5、speaker. The CA17 is designed for flush-mounting in a standard single-gang outlet box; connections are made as illustrated in the figure below. EMERGENCY CALL SWITCHModel CA17 Model CA17 Connecting Diagram 50 Spring Street, Ramsey, NJ 07446 U.S.A. 201-934-8500; FAX: 201-934-9832 Printed in U.S.A. 0301 2003 Bogen Communications, Inc. 54-5919-01R3 Specifications subject to change without notice. From MCP35A +12V Terminal. Connect only the +12V Terminal to this point. Do not connect a ground lead to this point. Use second pin to jump +12V DC to additional SCR25A panels. RadioFans.CN 收音机爱 好者资料库