Bogen-CA10A-11A-Operation-Manual 电路图 维修手册.pdf

上传人:cc518 文档编号:333134 上传时间:2026-07-03 格式:PDF 页数:1 大小:202.98KB
下载 相关 举报
Bogen-CA10A-11A-Operation-Manual 电路图 维修手册.pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

《Bogen-CA10A-11A-Operation-Manual 电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《Bogen-CA10A-11A-Operation-Manual 电路图 维修手册.pdf(1页珍藏版)》请在收音机爱好者资料库上搜索。

1、CA10A Call Switch Model CA10A is a 2-position room switch designed for use with SBA-Series room selector panels. When the switch is pressed, the annunciator lamp on the SBA-Series switchbank illuminates, designating the calling station. When the switch is released, the lamp remains illuminated until

2、 the call is answered. The switch is designed for flush mounting in a standard single- gang outlet box. Refer to Figure 1 below and wire the switch as follows: 1. Connect the unshielded wire from the corresponding annunciator terminal on the room selector panel to the red wire of the CA10A switch. 2

3、. Connect the black wire to the speaker ground (shield of speaker line). CA11A Call Switch Model CA11A is a 3-position switch providing annunciator call and privacy control. The switch has two fixed positions,TALK and PRIVACY. In the TALK position, the remote station has normal, non-private operatio

4、n. In the PRIVACY position, the remote station cannot be monitored from the main console. The CA11A also has a momentary PRESS TO CALL position. When the switch is pressed, the annunciator lamp on the SBA- Series room selector panel illuminates, designating the calling station. When the switch is re

5、leased, the lamp remains illumi- nated until the call is answered. The switch is designed for flush mounting in a standard single- gang outlet box. Refer to Figure 2 below and wire the switch as follows: 1. Connect the unshielded wire from the corresponding annunciator terminal on the room selector

6、panel to the red wire of the CA11A switch. 2. Connect the white wire to the center tap of the room speaker line-matching transformer. This connection may be made via the speaker cable shield, as shown in Figure 2. 3. Connect the black wire to the audio system ground at the shield of the audio cable from the console, as shown in Figure 2. - - - - - - CALL SWITCHESModels CA10A FAX: 201-934-9832 Printed in U.S.A. 0011 2000 Bogen Communications, Inc. 54-5972-01R2 0011 Specifications subject to change without notice. RadioFans.CN 收音机爱 好者资料库

展开阅读全文
相关资源
猜你喜欢
相关搜索
资源标签

当前位置:首页 > 功放/音响/收扩 > Bogen

copyright@ 2008-2026 收音机爱好者资料库 版权所有
备案编号:鄂ICP备16009402-5号