《Bogen-Orator-Operation-Manual 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Bogen-Orator-Operation-Manual 电路图 维修手册.pdf（20页珍藏版）》请在收音机爱好者资料库上搜索。
1、Inf rared Voi ce Rei nf orcement Syst em 2011 Bogen Communications, I nc. All rights reserved. Specifications subject to change without notice. 54- 2197- 01G 1306 RadioFans.CN 收音机爱 好者资料库 CAUTI ON RI SK OF ELECTRI C SHOCK DO NOT OPEN CAUTI ON: TO PREVENT THE RI SK OF ELECTRI C SHOCK, DO NOT REMOVE AN
2、Y FRONT/ BACK COVERS OR PANELS. NO USER- SERVI CEABLE PARTS I NSI DE. REFER SERVI CI NG TO QUALI FI ED PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte- nance ( servicing) instructions. The lightning flash
3、 with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTI ON DANGER OF EXPLOSI ON I F TRANSMI TTER
4、BATTERY I S I NCORRECTL Y REPLACED. REPLACE ONL Y WI TH SAME OR EQUI VALENT TYPE WARNI NG BATTERY SHALL NOT BE EXPOSED TO EXCESSI VE HEAT SUCH AS SUNSHI NE, FI RE, OR THE LI KE. NOTICE: Ev e ry e ffort was mad e to e nsure that the information in this guid e was comple te and accurate at the time of
5、 printing. Howe v e r, information is subje ct to change . WARNING: T o re d uce the risk of Fire or Ele ctric Shock, Do Not Expose this apparatusto rain or moisture . Apparatus shall not be e x pose d to d ripping or splashing and no obje cts fille d with liquid s, such as v ase s shall be place d
6、on the apparatus. WARNING: Only conne ct unit to AC mains outle t prov id ing prote ctiv e e arthing conne ction. NOTE: Mains plug or an appliance coupler are used as disconnect dev ices from the mains and shall remain re ad ily acce ssible and ope rable . CAUTION: These serv icing instructions are
7、for use by qualified serv ice personnel only . T o reduce the risk of e le ctric shock, d o not pe rform any se rv icing othe r than that containe d in the ope ratinginstructions unle ss y ou are qualifie d to d o so. Alway s follow the se basic safe ty pre cautions whe n installing and using the un
8、it: IMPORTANT SAFETY INSTRUCTIONS 1.Re ad the se instructions. 2.Ke e p the se instructions. 3.He e d all warnings. 4.Follow all instructions. 5.Do not use this apparatus ne ar wate r. 6. Cle an unit with d ry cloth. 7.Do not block any v e ntilation ope nings. Install in accord ance with the manufac
9、ture rs instructions. 8.Do not install ne ar any he at source s such as rad iators, he at re giste rs, stov e s, or othe r apparatus(includ ing amplifie rs) that prod uce he at. 9.Do not d e fe at the safe ty purpose of the polariz e d or ground ing-ty pe plug. A polariz e d plug has two blad e s wi
10、th one wid e r than the othe r. A ground ing-ty pe plug has two blad e s and a third ground ing prong. The wid e blad e , or the third prong, are prov id e d for y our safe ty . If the prov id e dplug d oe s not fit into y our outle t, con- sult an e le ctrician for re place me nt of the obsole te o
11、utle t. 10. Prote ct the powe r cord from be ing walke d on or pinche d particularly at plugs, conv e nie nce re ce ptacle s, and the point whe re the y e x it from the apparatus. 11.Only use attachme nts/acce ssorie s spe cifie d by the manufacture r. 12. Unplug this apparatus d uring lightning sto
12、rms or whe n not use d for long pe riod s of time . 13. Refer all serv icing to qualified serv ice personnel. Serv icing is required when the apparatus has been d amage d in any way , such as powe r-supply cord or plug is d amage d , liquid has be e n spille d or obje cts hav e fallen into the appar
13、atus, the apparatus has been ex posed to rain or moisture, does not operate normally , or has be e n d roppe d . RadioFans.CN 收音机爱 好者资料库 Table of Contents Descr iption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15、 . . . . . . . . . . . . . . . .1 ORB35 Receiver / Base Unit Fr ont Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 ORB35 Receiver / Base Unit Rear Panel . . . . . . . . . . . . . . . . . . . . . . . .
16、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 OMX1 MI C/ Tr ansmitter Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17、3 ORS I nfr ar ed Sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Quick- Star t I nstallation I nstr uctions . . . . . . . . . . . . . .
18、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Setting System Volumes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19、 . . . . . . . . . . . . . . . . . . .4 ORB35 Receiver / Base Unit I nstallation Exclusion of Cer tain Damages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Accessor ies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 RadioFans.CN 收音机爱 好者资料库 This Page I ntentionally Left Blank. 1 Descr iption The Bogen Or atoris a dual- channel, infrared ( I R) wireless mi
21、crophone/ transmitter and mixer/ amplifier system that is designed to enhance a presenters voice in all areas of the room. I R technology eliminates the interference and cross- talk from adjacent rooms that occurs with radio- based wireless products. I n addition to two independent wireless micropho
22、ne/ transmitter channels, the receiver/ base unit ( ORB35) provides 4 AUX inputs for the connection of various source devices like the audio output of a computer, a video projector, a DVD player, and other audio sources. A separate Override input allows its audio source to take precedence over the A
23、UX inputs. Typically, this input is connected to the facilitys area- wide paging system so that important announcements can be clearly heard through the Orator system. A highly functional 8- Band equalizer allows a tremendous amount of control to compensate for room acoustics. A single, convenient,
24、master volume control provides an easy means of adjusting the overall system level. The Orator uses a centrally located ceiling sensor ( ORS) to receive infrared signals from its MI C/ Transmitter units ( OMX1) . Each OMX1 contains a built- in microphone and is designed to be used as a pendant micro
25、phone suspended from a neck- worn lanyard ( with safety break- away latch) or as a handheld microphone. A professional style wire belt clip and external microphone input allows the OMX1 to be used as a body- pack if desired. A compatible, external microphone must be obtained separately for this use.
26、 The OMX1 also contains an AUX input jack for connection to audio source devices. This function of the OMX1 allows audio devices to be easily and wirelessly connected into the Orator system. The ORB35s unique front- mounted charging docks and rotating cover provide a place for secure storage and cha
27、rging of the OMX1 units. Users always know where the charging docks are and this configuration eliminates the need to find an unused outlet and a suitable spot to put the charger itself. The Orators cover rotates up and out of the way when the system is in use and back down to help secure the OMX1 u
28、nits when not in use. A key lock allows the cover to be locked in the closed position, and also in the open position if the rotating cover function is not desired. The lanyard can be left attached to the OMX1 while in the charging dock with the lanyard itself neatly tucked away in the storage area b
29、elow the charging dock. Each OMX1 unit is capable of muting the other OMX1 in the system or of initiating an intercom call request to a compatible facility intercom system. The front area contains two function buttons specifically for these features. A simple press of one button initiates an interco
30、m call. Pushing and holding the other button will cause the other OMX1 to be muted. These features can be enabled or disabled per OMX1 through the ORB35 unit. The OMX1 itself contains no switches for setting these features or its transmit frequency. I nstead the OMX1 communicates with the ORB35 unit
31、 when it is inserted into the charging dock. The ORB35 unit syncs the OMX1 with frequency to transmit on and what specific functions are to be enabled. All settings are made on the rear of the ORB35 unit. Along with all this innovation comes Bogens proven amplifier reliability. The same industrial g
32、rade amplifier technologies that have made Bogen a staple of commercial public address systems for over 80 years are used in the Orator. Highly dependable electronic components and robust amplifier designs wrapped in heavy- gauge steel enclosures ensure years of operational service. Package Contents
33、 The Bogen Orator System comes complete with the following items: 1 Receiver / Base Unit ( ORB35) 2 Secur ity Cover Keys 1 or 2 MI C/ Tr ansmitter s ( OMX1) Orat or 1 Syst em i ncl udes 1 OMX1 uni t ; Orat or 2 Syst em i ncl udes 2 OMX1 uni t s 2 Dock Selection Tabs ( per OMX1) 1 Lanyar d ( per OMX1
34、) 1 Lanyar d Attachment Plate ( per OMX1) 1 Rechar geable Li- I on Batter y ( per OMX1) 5 Blank I dentification Label Car ds ( per OMX1) 1 I nfr ar ed Sensor ( ORS) 1 Sensor Cable - 50 ft. ( 15m) appr ox. 1 Sensor Mounting Br acket ( with har dwar e) 2 ORB35 Receiver / Base Unit Fr ont Panel 1. Powe
35、r Switch -page 8 2. Rotating Secur ity Cover Lock 3. Tr anslucent Rotating Secur ity Cover -page 9 4. Built- I n Char ging Docks -page 9 5. ALD Pr ogr am Monitor Outputs -page 6 6. I nput 4 Connections -page 6 7. AUX I nput Volume Contr ols -page 8 8. Master Volume Contr ol -page 8 9. Bass the “LONG
36、” setting provides a delay approximately twice as long ( for atypical paging situations) . #8.Turn the confirmation tone ON or OFF. 8 ORB35 Receiver / Base Unit Contr ols not included) Local Micr ophone Mute - Mutes OMX1 microphone. AUX I nput - For line- level audio sources. Status I ndicator - 3-
37、level battery indicator the status indicator will illuminate. To turn the OMX1 OFF, press and hold the power button for more than three seconds; the status indicator will extinguish. I nputs The OMX1 includes a built- in microphone for use when worn around the neck as a pendant or as a handheld micr
38、ophone. Two additional inputs are provided for external devices: MI C:This input is compatible with external lavaliere and headset microphones. The external microphone device must have a 3. 5mm mono plug and be able to operate from a 2. 0V DC supply with a 680- ohm series resistance. Using this jack
39、 disables the built- in microphone. AUX:This input will work with either stereo or mono sources. I t requires a 3. 5 mm stereo or mono plug with output signal levels of approximately . 75V into 3k- ohms. The ultimate level is determined by both the onboard volume control and the ORB35 unit volume tr
40、im. Using this jack disables any microphones and is not affected by the Local MI C Mute function. Volume Contr ol A thumbwheel volume control located on the top of the OMX1 provides the user with a means of controlling the level of their program at the ORB35 unit. Care must be taken when adjusting v
41、olume levels with the built- in microphone not to cause feedback. The Orator products are a voice reinforcement system and when the voice program level is set correctly, the speakers will not pick up their own sound. Batter y Life Status I ndicator The status indicator also provides information on b
42、attery life using three signals: Continuous Gr een good battery life; Flashing Gr een approximately 1 hour of battery life remaining; Red approximately 10 minutes of battery life remaining. The OMX1 will turn itself OFF when there is not enough battery life to sustain operation. Local Micr ophone Mu
43、te The OMX1 provides a means to mute its built- in microphone ( or an external microphone) . Pressing the power button quickly will toggle the microphone mute function ON and OFF. The OMX1 will indicate local mute mode by illuminating the status indicator amber. NOTE: Battery level status will be su
44、ppressed while in this mode. The AUX input is not affected by the local microphone mute mode,and will play normally. IMPORTANT: I nstallation of the Dock Selection Tab is designed to be semi- permanent. I n order to remove, the Tab can be twisted and then pried (see illustration). I f twisted too fa
45、r, the Tab will break (with no effect on the unit).Two (2) Dock Selection Tabs are included per OMX1. DOCK SELECTI ON TAB DOCK SELECTI ON TAB PRY HERE ADock Oper ationBDock Oper ation SI DE VI EW FRONTREAR “TWI ST” DOCK SELECTI ON TAB TO THI S ANGLE ( as shown) 12 OMX1 Wear ing Options NOTE: Due to
46、the line- of- sight limitations of an I R- based wireless system, it is very important that the Emitter Lens of the OMX1 Mic/ Transmitter is not blocked or covered when in use. Pendant The OMX1 can be worn around the neck as a pendant using the lanyard and lanyard plate provided. The lanyard is plac
47、ed over the head and the placement of the OMX1 is adjusted simply by sliding it up and down the lanyard. I deally the OMX1 should be located approximately the width of the users hand below the chin. See page 13 for I nstruction on how to properly assemble and position the OMX1 adjustable lanyard. Bo
48、dy- Pack The OMX1 will allow for body- pack applications. The OMX1 can be securely placed onto an appropriate part of the users clothing ( e. g. , belt, pocket, etc. ) . A compatible external microphone plugged into the MI C jack is required when using the OMX1 in this manner. Handheld The OMX1 is d
49、esigned to be held comfortably in the users hand. The front of the transmitter is placed in the palm of the hand with the lens overhang sitting above the users index finger ensuring that the emitter lens is not covered. The user then speaks at a normal speaking level into the top of the OMX1 while holding it about 6 inches away from the users mouth. Audio Link The OMX1 can be used to connect audio sources into the Orator system. Simply plug a mono or stereo line- level signal into the AUX input jack ( 1/ 8” mini style) and use the OMX1s volu
免费区 
