Bogen-PVSC-Operation-Manual 电路图 维修手册.pdf

《Bogen-PVSC-Operation-Manual 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Bogen-PVSC-Operation-Manual 电路图 维修手册.pdf（1页珍藏版）》请在收音机爱好者资料库上搜索。

1、Description The Power Vector Security Cover (PVSC) provides protection against tampering.The sys- tem settings of a Power Vector amplifier are protected from accidental tampering while still leaving the power and meter switches accessible. It also provides for access to any desired input volume cont

2、rol knobs via break-off sections. Installation Note:If access to any of the input volume control knobs is desired, be certain to remove the break-off sections of the PVSCprior to its installation (see below). 1. Line up the PVSC to the front panel of the Power Vector amplifier using the screw holes

3、as a guide. 2. Attach the PVSC to the amplifier using the three screws provided. Break-offs Using a thin, flathead screwdriver, insert the screwdriver head into the center of the break-off piece and twist. If necessary, use a knife or file to take off any sharp edges after removal. CAUTION:The break

4、-off piece can fly off while twisting and become a hazard. Take reasonable precautions to prevent any flying pieces from causing injury. Specifications subject to change without notice. 2002 Bogen Communications, Inc. Part No. 54-2076-01B Printed in USA. 0212 50 Spring Street, Ramsey, NJ 07446, U.S.

5、A. Tel.201-934-8500,Fax:201-934-9832, Model PVSC POWER VECTOR SECURITY COVER Description The Power Vector Security Cover (PVSC) provides protection against tampering.The sys- tem settings of a Power Vector amplifier are protected from accidental tampering while still leaving the power and meter swit

6、ches accessible. It also provides for access to any desired input volume control knobs via break-off sections. Installation Note:If access to any of the input volume control knobs is desired, be certain to remove the break-off sections of the PVSCprior to its installation (see below). 1. Line up the

7、 PVSC to the front panel of the Power Vector amplifier using the screw holes as a guide. 2. Attach the PVSC to the amplifier using the three screws provided. Break-offs Using a thin, flathead screwdriver, insert the screwdriver head into the center of the break-off piece and twist. If necessary, use

8、 a knife or file to take off any sharp edges after removal. CAUTION:The break-off piece can fly off while twisting and become a hazard. Take reasonable precautions to prevent any flying pieces from causing injury. Specifications subject to change without notice. 2002 Bogen Communications, Inc. Part No. 54-2076-01B Printed in USA. 0212 50 Spring Street, Ramsey, NJ 07446, U.S.A. Tel.201-934-8500,Fax:201-934-9832, Model PVSC POWER VECTOR SECURITY COVER RadioFans.CN 收音机爱 好者资料库