《Fostex-D-1624-Quick-Guide 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Fostex-D-1624-Quick-Guide 电路图 维修手册.pdf（28页珍藏版）》请在收音机爱好者资料库上搜索。
1、 This manual is the Quick Operation Guide for the Model D824/D1624. This manual describes important information for using the recorder for the first time including Preparation of a recording medium and Formatting a disk. Please read this manual carefully before using the recorder. In addition, this
2、manual also describes the basic operations such as Connect- ing the recorder to an external mixing console, Basic recording for analog source and Basic recording for digital source. Even if this is the first time for you to use the recorder, you will be able to understand the basic opera- tions of t
3、he recorder by reading this manual. To use all of the recorders functions, please also read the separate Reference manual. The pages of the Reference manual to be referred to are shown on page 25. Because all keys and buttons on the Model D824 and D1624 are identical, most descriptions are done base
4、d on the Model D1624. Please note any dif- ferences between the Model D824 and D1624, the explanation or note for each model will be described. Quick Operation Guide 8 Track Digital Recorder 8288 463 000 Model 16 Track Digital Recorder Model RadioFans.CN 收音机爱 好者资料库 2 D824/D1624 Quick Operation Guide
5、 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
6、MOISTURE. SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and
7、 in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Water and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a sw
8、imming pool, and the like. 6. Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer. 9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) tha
9、t produce heat. 10. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 11. Grounding or Polarization - The precautions that should be taken so that the grounding or polarization means of an appli
10、ance is not defeated. 12. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point wherethey exit from the appliance.
11、13. Cleaning - The appliance should be cleaned only as recommended by the manufacturer. 14. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 15. Object and Liquid Entry - Care should be taken so that objects do not fall
12、and liquids are not spilled into the enclosure through openings. 16. Damage Requiring Service - The appliance should be serviced by qualified service personnel when: A.The power supply cord or the plug has been damaged; or B.Objects have fallen, or liquid has been spilled into the appliance; or C.Th
13、e appliance has been exposed to rain; or D.The appliance does not appear to operate normally or exhibits a marked change in performance; or E.The appliance has been dropped, or the enclosure damaged. 17. Servicing - The user should not attempt to service the appliance beyond that described in the op
14、erating instructions. All other servicing should be referred to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficie
15、nt magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: TO PREVENT ELECTRI
16、C SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND. An appliance and cart combination should be moved with care. Quick stops, excess
17、ive force, and uneven surfaces may cause the appliance and cart combination to overturn. 7. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 8. Ventilation - The appliance should be situated so that its location or position dose
18、 not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcaseor cabinet that may impede the flow of air through the ventilationop
19、enings. RadioFans.CN 收音机爱 好者资料库 3 D824/D1624 Quick Operation Guide This recorder is not equipped with recording media for recording and playback. Please read the section from page 5 to prepare the recording media to record, playback, and edit data on the recorder. Fostex in not responsible for any d
20、irect or consequential damages caused by operating the recorder and/ or a connected E-IDE hard disk. It is prohibited by law to use materials recorded on the recorder from music CDs and/ or video tapes for which copyrights belong to a third party for commercial contents, broadcasts, sales, and/ or d
21、istribution, except for your personal entertainment. RadioFans.CN 收音机爱 好者资料库 4 D824/D1624 Quick Operation Guide Contents Package contents. 5 Recording media. 5 Preparation for the current drive . 6 Installing a hard disk in a removable case .6 Formatting a hard disk drive. 9 Checking the available r
22、ecording time (REMAIN) on a formatted disk.11 Setup of the Internal Clock . 12 Connecting a analog mixer. 13 Connections when using the D824 .13 Connections when using the D1624 .14 Connecting a digital mixer. 15 Connections when using the D824 .15 Connections when using the D1624 .15 Basic recordin
23、g. 16 Initial settings .16 About sampling frequency .16 Basic analog recording .17 Undo and redo recording (single undo/redo.18 Basic digital recording.19 Multitrack recording using overdubbing. 21 Ping-pong recording . 21 MIxdown . 21 Recording in a new Program . 22 Basic Locate function . 23 Playb
24、ack using the Vari-pitch function . 24 Reference manual reference pages. 25 5 D824/D1624 Quick Operation Guide Package contents Main unit Detachable controller Dust cover Install this cover over the connectors on the removable case after you install the hard disk. Refer to page “7” for more informat
25、ion. Hard disk fixing screws Use these screws to fix the hard disk to the removable case. Refer to page “7” for more information. Lock-unlock key Use this key when you install the removable case with the hard disk in the recorder. Refer to page “8” for more information. Insulation paper Use these se
26、als when you install the hard disk into the removable case. Refer to page “7” for more information. The recorder is not equipped with any recording medium for recording/playback such as a hard disk drive (in this manual, we call the installed medium current drive). Therefore, to execute the multitra
27、ck recording using the recorder, you have to separately prepare a current drive. For a current drive, you can use any universal E-IDE hard disk drive* which has been tested and approved by FOSTEX. A hard disk drive can be installed in the removable case attached. Recording media Make sure that the p
28、ackage contains all the items listed below. The illustrations may not precisely match the appearance of the actual items. If you find that items are missing, contact your local dealer. The updated information on the operation-confirmed HD and backup media for D824/D1624 is mentioned in the following
29、 Fostex international web site. For those who are not able to check our web site, please contact Fostex distributor in your territory. Removable case Install a hard disk into this removable case. Refer to page “6” for more information. 6 D824/D1624 Quick Operation Guide Preparation for the current d
30、rive Removable case Hard disk unit Dust cover Insulation seals Lock-unlock key Fixing screws This recorder has a slot for an optional hard disk. First you need to install a hard disk into the removable case included in this recorder package before you install it into the slot. The following instruct
31、ions assume that you have already purchased an E-IDE hard disk unit. Prepare the following items for hard disk installation: Be sure to turn off the power to the recorder (or remove the power cable from the AC outlet) before installing a hard disk. First, you need to disassemble the removable case i
32、ncluded in the package so that you can install a hard disk into it. Installing a hard disk in a removable case Disassembling the removable case 1.Apply your thumb to the edge of the case on the connector side as shown in the figure, and slightly pull the cover in the direction of the arrow. 2.Apply
33、your thumbs to the side of the case and open the cover. In the same manner, open the cover on the other side. (Caution: Be careful not to pinch your fingers.) A hard disk is a high-precision device. Do not apply any impact to the disk when and after you install it in the case. Do not leave the disk
34、near a device that generates a strong magnetic field. Choose a level and stable surface for installation. Be careful not to injure yourself. Fostex is not liable for any malfunction or damage to the hard disk caused by mishandling. You need to set the DIP (Jumper) switch on the hard disk to “MASTER”
35、 before you install it into the removable case. If the switch is set to “SLAVE,” the hard disk will not function correctly. Refer to the instruction manual that came with your hard disk for more information on the DIP (Jumper) switch setting. 7 D824/D1624 Quick Operation Guide When you assemble the
36、case, follow the note below: If a projecting part on the hard disk touches the cover, apply the insulation seal (included in the package) to the surface of the case where the part would touch. If you use the disk with its part touching the cover, a short-circuit may occur, leading to a malfunction.
37、1.Assemble the case by installing the covers. After you assemble the case, store the case in a place not subject to magnetic fields. If you remove the case from the recorder and store or move the unit, cover the connectors on the removable case with the dust cover (included in the package) to protec
38、t the hard disk from building up static electricity and dust. Do not touch the connectors with your fingers to avoid static electricity. Assembling the case Connecting cables 1.Connect the cables in the removable case to the connectors on the rear of the hard disk. As shown in the figure, first conn
39、ect the power supply cable. Make sure that you connect the cables securely in the correct direction. Fixing the hard disk to the case 1.Align the screw holes. As shown in the figure, align the screw holes on the side of the disk with the holes on the case. 2.Insert four included fixing screws (two s
40、crews on each side) and tighten them. Align the screw holes on the other side of the hard disk with the holes on the case. Tighten four screws (two on each side). Some connectors on the hard disks may be too tight to connect cables easily. Do not apply excessive force to such connectors to avoid inj
41、ury or damage to the hard disk. Do not tighten the screws too much. Otherwise, you may damage the case. 8 D824/D1624 Quick Operation Guide Installing the removable case in the recorder 1. Remove the blank panel that covers the slot for the disk on the front panel of the recorder. (Note: Do not insert your fingers into the slot when the slot cover is open. Otherwise, electrical shock or injury may occur.) 2. Install the removable case (containing a hard disk inside) into the slot. Push in the case with the correct side facing toward you. (Use both hands to push it in so that
免费区 
