Fostex-D-1624-Reference-Manual 电路图 维修手册.pdf

《Fostex-D-1624-Reference-Manual 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Fostex-D-1624-Reference-Manual 电路图 维修手册.pdf（136页珍藏版）》请在收音机爱好者资料库上搜索。

1、Reference Manual 8 Track Digital Recorder Model 16 Track Digital Recorder Model This manual is the Reference Manual for the Model D824/D1624. Because all keys and buttons on the Model D824 and D1624 are identical, most descriptions are done based on the Model D1624. Please note any differences betwe

2、en the Model D824 and D1624, the explanation or note for each model will be described. 8288 461 000 RadioFans.CN 收音机爱 好者资料库 D824/D1624 Reference Manual (Safety Instruction/Contents) 2 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. RE

3、FER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 10. Power Sources - The appliance should

4、 be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 11. Grounding or Polarization - The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated. 12. Power Cord Protection - Power

5、supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. Cleaning - The appliance should be cleaned only as

6、recommended by the manufacturer. 14. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 15. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through

7、openings. 16. Damage Requiring Service - The appliance should be serviced by qualified service personnel when: A.The power supply cord or the plug has been damaged; or B.Objects have fallen, or liquid has been spilled into the appliance; or C.The appliance has been exposed to rain; or D.The applianc

8、e does not appear to operate normally or exhibits a marked change in performance; or E.The appliance has been dropped, or the enclosure damaged. 17. Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be ref

9、erred to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

10、persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY I

11、NSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance

12、and cart combination to overturn. 7. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 8. Ventilation - The appliance should be situated so that its location or position dose not interfere with its proper ventilation. For example

13、, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRI

14、C SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3.

15、Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Water and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen s

16、ink, laundry tub, in a wet basement, or near a swimming pool, and the like. 6. Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer. RadioFans.CN 收音机爱 好者资料库 D824/D1624 Reference Manual (Safety Instruction/Contents) 3 Contents Introduction.

17、6 Main Features.6 Precautions.7 Names and Functions Front panel section.9 Detachable controller section.10 Rear panel section.17 Display section.19 Display shown when the power is turned on.19 Preset display.19 Switching the display using the DISP SEL key.20 Switching the time base display using the

18、 SHIFT key and DISP SEL key.20 Changing programs using the PGM key.21 Warning display.21 Before Starting Time Base.23 Recording method and REMAIN indicator.24 Managing songs by program change function.25 Real tracks and Additional tracks.26 Input monitoring and playback monitoring.27 Audio file and

19、event.28 Formatting and Optimizing disks Formatting a current drive disk.30 Formatting a brand new hard disk.31 Reformatting an E-IDE hard disk.32 Formatting a backup disk (SCSI disk).32 Optimizing the disk.33 Handling Programs Creating a new program.34 Duplicating a program.35 Using a program chang

20、e function.36 Deleting a program.36 Editing a program title.37 Punch In/Out When is Punch In/Out recording.39 Auto Punch In/Out.39 Preparation.39 Rehearsing Auto Punch In/Out.41 Auto Punch In/Out Take.42 Single undo/redo auto punch in/out.42 Manual Punch In/Out.43 Preparation.43 Rehearsing Manual Pu

21、nch In/Out.43 Manual Punch In/Out Take.44 Single undo/redo manual punch in/out.45 Recording Digital data Digital recording from an external digital device.46 Digital recording to an external digital device.48 Connecting a Digital Mixer.50 Recording to a Metronome Sound Executing of record.52 RadioFa

22、ns.CN 收音机爱 好者资料库 D824/D1624 Reference Manual (Safety Instruction/Contents) 4 Storing a Locate Point Storing and editing the locate points to the memory keys.54 Storing in real-time.54 Editing and stored data.54 Storing and editing LOCATE key.53 Storing in real-time.53 Edit and re-store data that is

23、already stored.56 Locate Function Direct Locate.57 Auto Play function.58 Auto Return function.58 Auto Repeat function.59 Cue sold separately) or the Model 5043 balancing 8-16 I/O card (Exclusive for D1624; sold separately), +4dBu analog balanced input/ output can be added. Main features A removable

24、cartridge for easy installation and replacement of the hard disk at the front panel is employed. The recorder features non-destructive audio editing (a great advantage of digital recording) such as Copy then the recorder enters data edit mode. To edit data, use the SHUTTLE dial to move among the dig

25、its, and then use the JOG dial to change the value. * After you finish editing data, press the STORE key, and then press one of the Memory keys into which you want to store the point. The edited data will be stored in the specified Memory key. * While the current position of the recorder is indicate

26、d, press the STORE key, then one of the Memory keys into which you want to store the data. The current position or the recorder will be stored in the Memory key. You can do this while the recorder is running or stopped. * Press a desired Memory key, and then press the LOCATE key to locate the point stored in that Memory key (time, or bar/beat/clock). * In Setup mode, you can save or load song data for each Program. * All data will be retained after you turn off the power. * Refer to page “54” for more information on memory