McIntosh-C-26-Instruction-Manual 电路图 维修手册.pdf

《McIntosh-C-26-Instruction-Manual 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《McIntosh-C-26-Instruction-Manual 电路图 维修手册.pdf（1页珍藏版）》请在收音机爱好者资料库上搜索。

1、B- MODE SELECTOR For all stereo programs use the STEREO or STEREO REVERSE positions. All other positions are designed to handle monophonic programs. C- VOLUME ON/OFF: Turns the AC power to the C 26 on and adjusts loudness of sound to suit your taste 038-476 If Youre in a Hurry C-26 A- INPUT SELECTOR

2、 AUX: Connects any source requiring flat amplificalion plugged into AUX jacks on the back panel to the C 26 input stages TAPE 1: Connects the output of a tape recorder (with its own electronics) plugged into the TAPE 1 jacks on the back panel to the C 26 input stages TAPE 2: Connects the output of a

3、 second tape recorder (with its own electronics) plugged into the TAPE 2 jacks on the back panel in the C 26 input stages TUNER: Connects the output of a tuner plugged into the TUNER jacks on the back panel to the C 26 input stages PHONO 1: Connects the output of a record player or turntable plugged

4、 into the PHONO 1 jacks on the back panel to the C 26 preamplifier stages PHONO 2: Connects the output of a second record player or turntable plugged into the PHONO 2 jacks on the back panel to the C 26 preamplifier stages D- TREBLE: The high frequency program material is modified to Suit your taste

5、. Right channel is the large knob, the left channel is the small knob. E- BASS: The low frequency program material is modified to suit your taste. Right channel is the large knob, the left channel is the small knob. F- BALANCE: Permits the adjustment for unequal sound caused by room acoustics or pro

6、gram material. One speaker is made louder than the other. G- LOUDNESS: Frequency response is adjusted as volume is reduced to compensate for hearing losses at low volumes H- HEADPHONES: Plug in a sel of low impedance stereo headphones. I- PUSH BUTTONS MAIN: (speakers when properly connected in the b

7、ack panel) Push inMAIN speakers OFF, OutMAIN speakers ON REMOTE: Push inREMOTE speakers OFF, OutREMOTE speakers ON HF: Push in High frequencies are reduced to suppress unwanted noise. Out flat response LF: Push in Low frequencies are reduced to suppress unwanted rumble: Out flat response TAPE 1: Push in Monitor the program being recorded on TAPE recorder 1: Out Hear the program recorded on TAPE recorder 1 TAPE 2: Push in Monitor the program begin recorded on TAPE recorder 2: Out Hear the program recorded on TAPE recorder 2 RadioFans.CN 收音机爱 好者资料库