Rotel-RCD-06-OM 电路图 维修手册.pdf

《Rotel-RCD-06-OM 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Rotel-RCD-06-OM 电路图 维修手册.pdf（52页珍藏版）》请在收音机爱好者资料库上搜索。

1、RCD-06 Stereo Compact Disc Player Lecteur de disque compact Stereo-CD-Player Lettore CD Reproductor de Discos Compactos CD-Speler CD-spelare D- Owners Manual Manuel de lutilisation Bedienungsanleitung Manual de Instrucciones Manuale di Istruzioni Gebruiksaanwijzing Instruktionsbok RadioFans.CN 收音机爱

2、好者资料库 2 Rotel products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the

3、products must be appropriately recycled or processed in accordance with these directives. RCD-06 Stereo Compact Disc Player Important Safety Instructions WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or el

4、ectric shock, be sure that the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture, or a foreign object gets into t

5、he enclosure, im- mediately disconnect the power cord from the wall. Take the unit to a qualified service person for inspection and necessary repairs. Read all the instructions before connecting or operating the component. Keep this manual so you can refer to these safety instructions. Heed all warn

6、ings and safety information in these instructions and on the product itself. Follow all operating instructions. Clean the enclosure only with a dry cloth or a vacuum cleaner. You must allow 10 cm or 4 inches of unobstructed clearance around the unit. Do not place the unit on a bed, sofa, rug, or sim

7、ilar surface that could block the ventilation slots. If the component is placed in a bookcase or cabinet, there must be ventilation of the cabinet to allow proper cooling. Keep the component away from radiators, heat registers, stoves, or any other appliance that produces heat. The unit must be conn

8、ected to a power supply only of the type and voltage specified on the rear panel of the unit. Connect the component to the power outlet only with the supplied power supply cable or an exact equivalent. Do not modify the supplied cable in any way. Do not attempt to defeat grounding and/or polarizatio

9、n provisions. Do not use extension cords. Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed to heat, or damaged in any way. Pay particular attention to the power cord at the plug and where it exits the back of the unit. The power cord should be unplugged f

10、rom the wall outlet if the unit is to be left unused for a long period of time. Immediately stop using the component and have it inspected and/or serviced by a qualified service agency if: The power supply cord or plug has been damaged. Objects have fallen or liquid has been spilled into the unit. T

11、he unit has been exposed to rain. The unit shows signs of improper operation The unit has been dropped or damaged in any way Please use Class 2 Wiring when connecting the speaker terminals of the unit to ensure proper insulation and minimize the risk of electrical shock. IMPORTANT FOR LASER PRODUCTS

12、 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or bypassed. Avoid direct exposure to beam. 3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the player; leave all servicing to qualified service personnel. WARNING! To reduce

13、 the risk of electrical shock, fires, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose the unit to rain or moisture. 3. Do not touch the power cord or plug with wet hands. This symbol means that this unit is double insu- lated. An earth connection is not required. Place the unit on

14、 a fixed, level surface strong enough to support its weight. Do not place it on a moveable cart that could tip over. RadioFans.CN 收音机爱 好者资料库 3English RCD-06 Figure 2: RR-D95 Remote Control Tlcommande RR-D95 Fernbedienung RR-D95 Telecomando RR-D95 Mando a Distancia RR-D95 De RR-D95 afstandsbediening

15、Fjrrkontroll RR-D95 RR-D95 RR-D95 OPN/CLS TIMECLEARPROGREV REPEATRANDOMSCAN 10 123 456 78 0 9 Figure 1: Controls and Connections Commandes et branchements Bedienelemente und Anschlsse Pannello frontale e posteriore Controles y Conexiones Bedieningsorganen en aansluitingen Funktioner och anslutningar

16、 RadioFans.CN 收音机爱 好者资料库 4 Figure 3: Analog Outputs Sorties analogiques Analoge Ausgnge Uscite Analogiche Salidas Analgicas De analoge uitgangen Analoga utgngar Figure 4: Digital Outputs Sorties numriques Digitalausgang Uscite Digitali Salidas Digitales De digitale uitgangen Digitala utgngar RCD-06

17、Stereo Compact Disc Player DOUBLE INSULATION When servicing use only identical replacement parts WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE GND LEFT RIGHT PHONOCDTUNERAUX 1AUX 2TAPE 1PRE OUT RIGHT SPEAKER A EXT REM IN IR OUT 12V TRIGGER

18、OUT 1 2 SPEAKER IMPEDANCE A OR B 4 OHMS MINIMUM A AND B 8 OHMS MINIMUM LEFT INOUT RIGHT SPEAKER B INTEGRATED AMPLIFIER POWER CONSUMPTION: 220W LEFT ROTEL RCD-06 RCD-06 12V TRIGEXT REM ININ DOUBLE INSULATION When servicing use only identical replacement parts ROTEL RCD-06 DOUBLE INSULATION When servi

19、cing use only identical replacement parts 5English About Rotel A family whose passionate interest in music led them to manufacture high fi delity components of uncompromising quality founded Rotel over 40 years ago. Through the years that passion has remained undiminished and the family goal of prov

20、iding exceptional value for audiophiles and music lovers regardless of their budget, is shared by all Rotel employees. The engineers work as a close team, listening to, and fi ne tuning each new product until it reaches their exacting musical standards. They are free to choose components from around

21、 the world in order to make that product the best they can. You are likely to fi nd capacitors from the United Kingdom and Germany, semi conductors from Japan or the United States, while toroidal power transformers are manu- factured in Rotels own factory. Rotels reputation for excellence has been e

22、arned through hundreds of good reviews and awards from the most respected reviewers in the industry, who listen to music every day. Their comments keep the company true to its goal - the pursuit of equipment that is musical, reliable and affordable. All of us at Rotel, thank you for buying this prod

23、uct and hope it will bring you many hours of enjoyment. Getting Started Thank you for purchasing the Rotel RCD-06 Stereo Compact Disc Player. Its precision transport is back up by an 18-bit equivalent, multi-level Delta-Sigma D/A converter with 8x oversampling . These features, combined with Rotels

24、Balanced Design, ensure the RCD-06 will deliver the highest level of audio performance. When used in a high-quality audio system, your Rotel CD player will provide years of enjoyment. A Few Precautions Please read this manual carefully. In addition to installation and operating instructions, it prov

25、ides valuable information on various RCD- 06 system confi gurations as well as general information that will help you get optimum performance from your system. Please contact your authorized Rotel dealer for answers to any quesions you might have. In addition, all of us at Rotel welcome your questio

26、ns and comments. Save the RCD-06 shipping carton and all enclosed packing material for future use. Shipping or moving the RCD-06 in anything other than the original packing material may result in severe damage that is not covered by the warranty. Fill out and send in the owners registration card pac

27、ked with the RCD-06. Also be sure to keep the original sales receipt. It is your best record of the date of purchase, which you will need in the event warranty service is required. Placement Use common sense when placing the RCD-06 in a cabinet or when stacking other equipment. Make sure that the sh

28、elf or cabinet can support its weight. Do not stack heavy components on top of the RCD-06. Avoid placing the unit where it may be subject to excessive heat such as on top of a large power amplifi er or near a heat register. For best performance, avoid placing the unit where it may be subject to vibr

29、ation, such as near a speaker. Control Identifi cation The cover of this manual has a fold out panel that shows illustrations of the front and rear panels and the RR-D95 remote control. Each item in the illustrations is identifi ed with a call out in a gray box. Through out this manual the items ref

30、ered to in the text are identifi ed by the corresponding call out. The items on the front and rear panels are identifi ed with a number call out, such a 1. The items on the remote control are labeled with a letter call out, such as A. Contents Figure 1: Controls and Connections 3 Figure 2: RR-D95 Re

31、mote Control 3 Figure 3: Analog Outputs 4 Figure 4: Digital Outputs 4 About Rotel . 5 Getting Started . 5 A Few Precautions 5 Placement 5 Control Identifi cation 5 AC Power and Control . 6 AC Power Input e 6 Power Switch 1 and Power Indicator 2 6 Output Connections . 6 Analog Outputs - 6 Digital Out

32、put = 6 Operation . 6 Infrared Remote Control 4 6 Display 5 6 Disc Drawer 3 6 Transport Control Buttons . 7 OPEN/CLOSE Button 6 A 7 PLAY Button 7M 7 STOP Button 8F 7 PAUSE Button 9N 7 TRACK Buttons 0L 7 DIRECT ACCESS Buttons B 7 SEARCH Buttons K 7 Additional Features . 7 PROGRAM Button J 7 REVIEW Bu

33、tton I 8 CLEAR Button H 8 RANDOM Button D 8 REPEAT Button C 8 SCAN Button E 8 TIME Button G 8 External Remote Input w . 8 12V Trigger Connection q . 8 Troubleshooting . 8 Power Indicator Is Not Lit 8 Fuse Replacement 9 No Sound 9 Specifi cations . 9 6 AC Power and Control AC Power Input e Your RCD-0

34、6 is confi gured at the factory for the proper AC voltage in the country where you purchased it (either 120 volts or 230 volts). The AC line confi guration is noted on a decal on the back panel. NOTE: Should you move your CD player to another country, it may be possible to re- configure it for use o

35、n a different line volt- age. Do not attempt to perform this conversion yourself. Opening the enclosure of the RCD-06 exposes you to dangerous voltages. Consult a qualified service person or the Rotel factory service department for information. The RCD-06 should be plugged directly into a 2-pin pola

36、rized wall outlet or into the switched outlet on another component in your audio system. Do not use an extension cord. Be sure the power switch on the front panel of the RCD-06 is turned off (in the “out” position). Then, connect the supplied power cord to the AC power receptacle on the rear of the

37、unit and the AC power outlet. If you are going to be away from home for an extended period of time such as a month-long vacation, it is a sensible precaution to unplug your CD player (as well as other audio and video components) while you are away. Power Switch 1 and Power Indicator 2 The power swit

38、ch is located on the front panel of your CD player. To turn the CD player on, push the switch in. The LED indicator above the switch and the Display will light up, indicating that the CD player is turned on. To turn the CD player off, push the button again and return it to the “out” position. NOTE:

39、If you are using a switched outlet to turn on and off your CD player, you should leave the power switch in the “on” position. When AC power is applied to the unit, it will power up in fully active mode. Output Connections The RCD-06 gives you a choice of two dif- ferent kinds of output connections a

40、n analog output signal from the built-in D/A converter for use with conventional analog audio components and a coax digital output which provides an unprocessed digital data signal for use with outboard D/A converters or digital processors. NOTE: To prevent loud noises that neither you nor your spea

41、kers will appreciate, make sure the CD player is turned off when you make any signal connections. Analog Outputs - See Figure 3 for wiring illustration A pair of standard RCA jacks supplies an analog output signal from the RCD-06 to the source inputs of an audio preamplifi er, in- tegrated amplifi e

42、r, or receiver. Select high quality audio interconnect cables. Connect the left channel output of the RCD-06 to the left channel source input on the preamplifi er or other component. Connect the right output of the RCD-06 to the right channel source input on the preamplifi er or other component. Dig

43、ital Output = See Figure 4 for wiring illustration If you are using an outboard D/A converter or other digital processor, you will need an unprocessed digital data stream from the RCD-06, taken before the built-in D/A con- verter. This signal is supplied by the RCD- 06s back-panel digital output jac

44、k. Using a standard 75 ohm coax digital cable, connect the RCD-06s coax digital output to the coax digital input connector on the outboard D/A converter. Operation The RCD-06 can be operated using its front panel buttons or from corresponding buttons on the supplied infrared remote control. Spe- cif

45、i c instructions for each of these controls are detailed below. Most of the buttons are dupli- cated on the front panel and on the IR remote control. However, there are a few exceptions where the buttons are only available on one or the other. These exceptions are noted in the instructions. Infrared

46、 Remote Control 4 Before using the IR remote control, it is neces- sary to install two “UM-4/AAA” batteries (supplied). Remove the plastic cover on the back of the IR remote, install the batteries (observing the + and polarity indications), and reinstall the cover. To use the IR remote control, aim

47、it at the IR sensor 4 located in the Display area on the front panel of the RCD-06. Display 5 A lighted Display on the front panel of the RCD-06 provides useful information about the status of the unit, activation of special features, and track/time information for the disc being played. Each of the

48、se indicators is described in the detailed operating instructions that follow. Disc Drawer 3 A motor-driven disc drawer, located in the center of the RCD-06, slides out to accept a compact disc and retracts to play the disc. Place the compact disc in the drawer label-side up. Make sure the disc is properly centered in the tray. The drawer can be closed in two ways: pushing the OPN/CLS butt